journal article·2021-06

IMC Growth and Mechanical Properties of Cu/In-48Sn/Cu Solder Joints

Zheng Liu, Li Yang, Kai Jian Lu, Yao Cheng Zhang, Yu Hang Xu, Feng Xu, Hui Ming Gao

Journal of Electronic Materials· Volume 50· Issue 6
Publisher page

Abstract

The growth and shear properties of intermetallic compound (IMC) in Cu/In-48Sn/Cu solder joints at different bonding times have been studied, and the growth kinetics of interfacial Cu3(In,Sn) phase at different bonding temperatures investigated. The results show that the IMC of the Cu/In-48Sn/Cu joint is composed of Cu6(In,Sn)5 and Cu3(In,Sn) but transforms to Cu3(In,Sn) after 120 min of bonding at 260°C and pressure of 3 MPa. The morphology of the Cu6(In,Sn)5 layer changed from flat to scallop, and the growth rate of Cu3(In,Sn) located directly below the convex part of the Cu6(In,Sn)5 sector was significantly higher than that of Cu3(In,Sn) located directly below the concave part of the Cu6(In,Sn)5 sector. The shear strength of the solder joints first increased then slowly decreased, reaching 21.8 MPa when increasing the bonding time to 60 min. The shear strength of the solder joints was improved by the formation of Cu6(In,Sn)5 and Cu3(In,Sn), and Cu3(In,Sn) phase played a greater role in improving the shear strength of the solder joints than did Cu6(In,Sn)5 phase. The growth kinetics index n of Cu3(In,Sn) was 0.478 to 0.495, and the growth mechanism of Cu3(In,Sn) was controlled by diffusion at bonding temperatures of 250°C to 280°C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. S. Lei, M.H. Chen, and C.C. Wei, J. Mater. Sci. Mater. El. 29, 9757 (2018).10.1007/s10854-018-9014-3 ↗
2. H. Li, A. Rong, and C. Wang, J. Alloys Compd. 634, 94 (2015).10.1016/j.jallcom.2015.02.088 ↗
3. L. Zhang, Z.Q. Liu, and S.W. Chen, J. Alloys Compd. 750, 980 (2018).10.1016/j.jallcom.2018.04.040 ↗
4. D.G. Kim, and S.B. Jung, J. Alloys Compd. 386, 156 (2005).
5. H.R. Kotadia, P.D. Howes, and S.H. Mannan, Microelectron Reliab. 54, 153 (2014).10.1016/j.microrel.2014.02.025 ↗
6. S. Sommadossi, W. Gust, and E.J. Mittemeijer, Mater. Chem. Phys. 77, 924 (2003).10.1016/S0254-0584(02)00192-X ↗
7. J.M. Koo, and S.B. Jung, Microsyst. Technol. 13, 1567 (2007).10.1007/s00542-006-0344-3 ↗
8. J.H. Choi, K.Y. Lee, and S.W. Jun, Master. Trans. 46, 1042 (2005).10.2320/matertrans.46.1042 ↗
9. F. Tian, C.F. Li, and M. Zhou, J. Alloys Compd. 740, 500 (2018).10.1016/j.jallcom.2017.12.355 ↗
10. J. Wojewoda-Budka, and P. Zieba, Sci. Technol. Weld. Jt. 16, 541 (2011).10.1179/1362171811Y.0000000041 ↗
11. H.W. Tseng, C.T. Lu, and Y.H. Hsiao, Microelectron Reliab. 50, 1159 (2010).10.1016/j.microrel.2010.05.002 ↗
12. Y. Chiu, H. Yu, and H. Hung, Microelectron Reliab. 95, 18 (2019).10.1016/j.microrel.2019.02.004 ↗
13. J.F. Li, P.A. Agyakwa, and C.M. Johnson, Acta Mater. 58, 3429 (2010).10.1016/j.actamat.2010.02.018 ↗
14. K. Bobzin, N. Bagcivan, and L. Zhao, Front. Mech. Eng. Proc. 5, 370 (2010).10.1007/s11465-010-0107-9 ↗
15. C.C. Yu, P.C. Su, and S.J. Bai, Int. J. Precis. Eng. Man. 15, 143 (2014).10.1007/s12541-013-0317-2 ↗
16. Y.S. Chiu, H.Y. Yu, H.T. Hung, Y.W. Wang, and C.R. Kao, Microelectron Reliab. 95, 18 (2019).10.1016/j.microrel.2019.02.004 ↗
17. T.H. Chuang, C.L. Yu, and S.Y. Chang, J. Electron. Mater. 31, 640 (2002).10.1007/s11664-002-0136-1 ↗
18. B.J. Lee, M.H. Nong, and H.M. Lee, Acta Mater. 45, 1867 (1997).10.1016/S1359-6454(96)00325-4 ↗
19. S. Ren, and Y.K. Guo, Mater. Res. Express 6, 096313 (2019).10.1088/2053-1591/ab30da ↗
20. D. Ma, W.D. Wang, and S.K. Lahiri, J. Appl. Phys. 91, 3312 (2002).10.1063/1.1445283 ↗
21. K. Zeng, R. Stierman, T. Chiu, D. Edwards, K. Ano, and K. Tu, J. Appl. Phys. 97, 1 (2005).10.1007/10828028_1 ↗
22. S. Ren, M. Sun, and Z. Jin, Electron. Mater. Lett. 15, 562 (2019).10.1007/s13391-019-00154-7 ↗