journal article·2020-06

Development of Polythiophene/Prussian Red Nanocomposite with Dielectric, Photocatalytic and Metal Scavenging Properties

Shabnum Bashir, Syed Kazim Moosvi, Tabee Jan, Gaulthier Rydzek, Sajjad Husain Mir, Masood Ahmad Rizvi

Journal of Electronic Materials· Volume 49· Issue 6
Publisher page

Abstract

Hybrid materials of conducting polymers with coordination compound dopants offer a desirable combination of properties for targeted applications. This work presents polythiophene/prussian red (PTH/PR) nanocomposites as hybrid materials using PTH as a polymer matrix and PR nanoparticles as a readily available dopant with photo-reactive and magnetically active low-spin iron(III) complex. The PTH/PR nanocomposite was prepared by oxidative polymerization of thiophene monomers in the presence of PR nanoparticles. The synthesized material is characterized using Fourier transform infrared spectroscopy, powder x-ray diffraction and transmission electron microscopy. Comparative studies of the PTH/PR nanocomposite indicate an enhancement in thermal and electrical properties compared with other PTH nanocomposites. The investigated physicochemical properties of PTH/PR suggest its suitability as a material for environmental applications, which were explored through dye photodegradation and metal ion recovery via adsorption studies. The PTH/PR nanocomposite degraded 65% of a methylene blue dye within 100 min by photo-oxidation, following pseudo-first-order kinetics. It also displayed good adsorptive tendency towards precious metal ions including Au(III), Cu(II), Pd(II) and Ag(I). This finding suggests that PTH/PR nanocomposites could constitute potent nanomaterials for water treatment.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. J.G. Ibanez, M.E. Rincoon, S.G. Granados, M. Chahma, O.A.J. Quintero, and B.A.F. Uribe, Chem. Rev. 118, 4731 (2018).10.1021/acs.chemrev.7b00482 ↗
2. H. Zou, S. Wu, and J. Shen, Chem. Rev. 108, 3893 (2008).10.1021/cr068035q ↗
3. J.J. Villora-Pico, V. Belda-Alcázar, M.J. García-Fernández, E. Serrano, A. Sepulveda-Escribano, and M.M. Pastor-Blas, Langmuir 35, 6089 (2019).10.1021/acs.langmuir.9b00174 ↗
4. P. Sengodu and A.D. Deshmukh, RSC Adv. 5, 42109 (2015).10.1039/C4RA17254J ↗
5. M.V. Murugendrappa, S. Khasim, and M.A. Prasad, Bull. Mater. Sci. 28, 565 (2005).10.1007/BF02706343 ↗
6. J.L. Wojkiewicz, S. Fauveaux, and J.L. Miane, Synth. Met. 135, 127 (2003).10.1016/S0379-6779(02)00531-3 ↗
7. S. Koul, R. Chandra, and S.K. Dhawan, Polymer 41, 9305 (2000).10.1016/S0032-3861(00)00340-2 ↗
8. C. Karunakaran, P. Santharaman, M. Das, Biosens. Bioelectron. 69 (2015).10.1016/B978-0-12-803100-1.00002-5 ↗
9. D. Liu, J. Wang, X. Bai, R. Zong, and Y. Zhu, Adv. Mater. 28, 7284 (2016).10.1002/adma.201601168 ↗
10. C. Brosseau and P. Queffelec, J. Appl. Phys. 89, 4532 (2001).10.1063/1.1343521 ↗
11. O. Rana, R. Srivastava, G. Chauhan, M. Zulfequar, M. Husain, P.C. Srivastava, and M.N. Kamalasanan, Phys. Status Solidi A 209, 2539 (2012).10.1002/pssa.201228252 ↗
12. O. Bubnova, M. Berggren, and X. Crispin, J. Am. Chem. Soc. 134, 16456 (2012).10.1021/ja305188r ↗
13. M.V. Fabretto, D.R. Evans, M. Mueller, K. Zuber, P. Hojati-Talemi, R.D. Short, G.G. Wallace, and P.J. Murphy, Chem. Mater. 24, 3998 (2012).10.1021/cm302899v ↗
14. H.S. Park, S.J. Ko, J.S. Park, J.Y. Kim, and H.K. Song, Sci. Rep. 3, 2454 (2013).10.1038/srep02454 ↗
15. L. Li, J. Yan, T. Wang, Z.J. Zhao, J. Zhang, J. Gong, and N. Guan, Nat. Commun. 6, 5881 (2015).10.1038/ncomms6881 ↗
16. J. Tao, T. Luttrell, and M. Batzill, Nat. Chem. 3, 296 (2011).10.1038/nchem.1006 ↗
17. S. Ghosh, N.A. Kouame, S. Remita, L. Ramos, F. Goubard, P.H. Aubert, A. Dazzi, A.D. Besseau, and H. Remita, Sci. Rep. 5, 18002 (2015).10.1038/srep18002 ↗
18. J. Liu, Y. Liu, N. Liu, Y. Han, X. Zhang, H. Huang, Y. Lifshitz, S.T. Lee, J. Zhong, and Z. Kang, Science 347, 970 (2015).10.1126/science.aaa3145 ↗
19. B.M. Wong and J.G. Cordaro, J. Phys. Chem. C 115, 18333 (2011).10.1021/jp204849e ↗
20. R. Bobade, J. Polym. Eng. 31, 209 (2011).10.1515/polyeng.2011.044 ↗
21. P. Pascariu, A. Airinei, M. Grigoras, L. Vacareanu, and F. Iacomi, Appl. Surf. Sci. 352, 95 (2015).10.1016/j.apsusc.2015.03.063 ↗
22. L. Esser, N.P. Truong, B. Karagoz, B.A. Moffat, C. Boyer, J.F. Quinn, M.R. Whittaker, and T.P. Davis, Polym. Chem. 7, 7325 (2016).10.1039/C6PY01797E ↗
23. M.O. Ansari, M.M. Khan, S.A. Ansari, and M.H. Cho, J. Saudi Chem. Soc. 19, 494 (2015).10.1016/j.jscs.2015.06.004 ↗
24. P.C. Nethravathi, M.A.P. Kumar, D. Suresh, K. Lingaraju, H. Rajanaika, H. Nagabhushana, and S.C. Sharma, Mater. Sci. Semicond. Process. 33, 81 (2015).10.1016/j.mssp.2015.01.034 ↗
25. S. Devari, M.A. Rizvi, and B.A. Shah, Tetrahedron Lett. 57, 3294 (2016).10.1016/j.tetlet.2016.06.046 ↗
26. S. Devari, R. Deshidi, M. Kumar, A. Kumar, S. Sharma, M. Rizvi, M. Kushwaha, A.P. Gupta, and B.A. Shah, Tetrahedron Lett. 54, 6407 (2013).10.1016/j.tetlet.2013.09.036 ↗
27. S. Devari, M. Kumar, R. Deshidi, M.A. Rizvi, and B.A. Shah, Beilstein J. Org. Chem. 10, 2649 (2014).10.3762/bjoc.10.277 ↗
28. S.A. Akhoon, T. Naqvi, S. Nisar, and M.A. Rizvi, Asian J. Chem. 27, 2745 (2015).10.14233/ajchem.2015.18834 ↗
29. M. Kumar, A. Kumar, M.A. Rizvi, and B.A. Shah, RSC Adv. 5, 55926 (2015).10.1039/C5RA05695K ↗
30. N. Chalotra, A. Ahmed, M.A. Rizvi, Z. Hussain, and Q.N. Ahmed, B. A. Shah. J. Org. Chem. 83, 14443 (2018).10.1021/acs.joc.8b02193 ↗
31. M.A. Rizvi, R.M. Syed, and B. Khan, J. Chem. Educ. 88, 220 (2011).10.1021/ed100339g ↗
32. M.A. Rizvi, Russ. J. Gen. Chem. 85, 959 (2015).10.1134/S1070363215040337 ↗
33. M.A. Rizvi, M. Mane, M.A. Khuroo, and G.M. Peerzada, Monatsh. Chem. 184, 655 (2017).
34. M.A. Rizvi, Y. Dangat, T. Shams, and K.Z. Khan, J. Chem. Educ. 93, 355 (2016).
35. M.A. Rizvi, N. Teshima, and G.M. Peerzada, Croat. Chem. Acta 86, 345 (2013).10.5562/cca2167 ↗
36. M.A. Rizvi, N. Teshima, R.M. Syed, and S.A. Akhoon, Croat. Chem. Acta 88, 67 (2015).10.5562/cca2479 ↗
37. S. Bashir, M. Mustafa, S.W. Safvi, N.A. Farhad, M.A. Rizvi, and C. Mai, J. Sci. 45, 1087 (2018).
38. S.K. Moosvi, K. Majid, and T. Ara, J. Appl. Polym. Sci. 133, 1 (2016).
39. M.R. Karim, J.H. Yeum, M.S. Lee, and K.T. Lim, Mater. Chem. Phys. 8112, 779 (2008).10.1016/j.matchemphys.2008.06.042 ↗
40. G. Ma, X. Liang, L. Li, R. Qiao, D. Jiang, Y. Ding, and H. Chen, Chemosphere 100, 146 (2014).10.1016/j.chemosphere.2013.11.053 ↗
41. S.K. Moosvi, K. Majid, and T. Ara, J. Mater. Sci.: Mater. Electron. 27, 6891 (2016).
42. S.K. Moosvi, K. Majid, and T. Ara, Ind. Eng. Chem. Res. 56, 4245 (2017).10.1021/acs.iecr.7b00167 ↗
43. J. Tauc, R. Grigorovici, and A. Vancu, Phys. St. Sol. B 15, 627 (1966).10.1002/pssb.19660150224 ↗
44. Q. Li, L. Chen, M.R. Gadinski, S. Zhang, G. Zhang, H.U. Li, E. Iagodkine, A. Haque, L.Q. Chen, T.N. Jackson, and Q. Wang, Nature 523, 576 (2015).10.1038/nature14647 ↗
45. Y. Hui, X. Wang, M. Yaon, and X. Yao, Prog. Nat. Sci.: Mater. Int. 23, 402 (2013).10.1016/j.pnsc.2013.06.002 ↗
46. M. Chirita, I. Grozescu, L. Taubert, H. Radulescu, E. Princz, É. Stefanovits-Bányai, C. Caramalau, L. Bulgariu, M. Macoveanu, and C. Muntean, Chem. Bull. 54, 33 (2009).
47. S.K. Moosvi and K. Majid, Bull. Mater. Sci. 40, 1151 (2017).10.1007/s12034-017-1472-3 ↗
48. J. Upadhyay and A. Kumar, Compos. Sci. Technol. 97, 55 (2014).10.1016/j.compscitech.2014.04.003 ↗
49. S. Murugavel and M. Malathi, Mater. Res. Bull. 81, 93 (2016).10.1016/j.materresbull.2016.05.004 ↗
50. D.C. Tiwari, V. Sen, and R. Sharma, Ind. J. Pure Appl. Phys. 50, 49 (2012).
51. M.H. Najar and K. Majid, RSC Adv. 5, 107209 (2015).10.1039/C5RA19992A ↗
52. M. Sharif and B. Pourabas, RSC Adv. 6, 93680 (2016).10.1039/C6RA16701B ↗
53. M. Sakil, A.K. Singh, and G.S. Roy, Researcher 5, 51 (2013).
54. M.A. Rizvi, S.K. Moosvi, T. Jan, S. Bashir, P. Kumar, W.D. Roos, and H.C. Swart, Polymer 163, 1 (2019).10.1016/j.polymer.2018.12.044 ↗
55. N. Das, Hydrometallurgy 103, 180 (2010).10.1016/j.hydromet.2010.03.016 ↗
56. V. Sevil and A. Bilge, J. Hazard. Mater. 149, 226 (2007).10.1016/j.jhazmat.2007.04.109 ↗
57. O. Yavuz, Y. Altunkaynak, and F. Güzel, Wat. Res. 37, 948 (2003).10.1016/S0043-1354(02)00409-8 ↗