journal article·2019-12

Measurements of Mixing Enthalpy for a Lead-Free Solder Bi-In-Sn System

M. R. Kumar, S. Mohan, C. K. Behera

Journal of Electronic Materials· Volume 48· Issue 12
Publisher page

Abstract

Measurements of mixing enthalpy for a Bi-In-Sn system needs special attention as far as the lead-free solder applications are concerned. Lead-free solder is generally used for solder joints in electronic equipment. In this work, an MHTC 96 Line Evo (Setaram Instruments, France) drop-solution calorimeter was used to determine the integral enthalpy of mixing for a Bi-In-Sn system at 767 K, 813 K and 855 K using drop technique. The enthalpy of mixing was measured for three different cross sections of (Sn0.33Bi0.67)1−x Inx, (Sn0.50Bi0.50)1−x Inx and (Sn0.67Bi0.33)1−x Inx. Indium was dropped onto the Bi-Sn alloys over the entire composition of indium. Partial quantities of indium mixing were calculated from the integration of the heat flow curve using CALISTO software. Subsequently, integral molar quantities of mixing were calculated from the partial quantities. Mixing enthalpy was found to be almost temperature-independent in the Bi-In-Sn system. Iso-enthalpy curves for the integral mixing enthalpy were plotted at 813 K. The data from this study were analysed with a least-squares fit using the Redlich–Kister–Muggianu polynomial to determine the ternary interaction parameter.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Metallurgical and Alloy Processes · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. N. Moelans, K.C. Hari Kumar, and P. Wollants, J. Alloys Compd. 360, 98 (2003).10.1016/S0925-8388(03)00325-6 ↗
2. V.T. Witusiewicz, U. Hecht, and S. Rex, J. Alloys Compd. 428, 115 (2007).10.1016/j.jallcom.2006.03.050 ↗
3. B. Brunetti, D. Gozzia, M. Iervolina, V. Piacentea, G. Zanichi, N. Parodi, and G. Borzone, Calphad 30, 431 (2006).10.1016/j.calphad.2006.07.003 ↗
4. D.P. Tao, J. Alloys Compd. 457, 124 (2008).10.1016/j.jallcom.2007.02.123 ↗
5. M.H. Braga, J. Vizdal, A. Kroupa, J. Ferreira, D. Soares, and L.F. Malheiros, Calphad 3, 468 (2007).10.1016/j.calphad.2007.04.004 ↗
6. D.V. Malakhov, X.J. Liu, I. Ohnuma, and K. Ishida, J. Phase Equilib. 216, 514 (2000).10.1007/s11669-000-0019-1 ↗
7. C. Yang, F. Chen, W. Gierlotka, S. Chen, K. Hsieh, and L. Huang, Mater. Chem. Phys. 112, 94 (2008).10.1016/j.matchemphys.2008.05.034 ↗
8. J. Vizdal, M.H. Braga, A. Kroupa, K.W. Richter, D. Soares, L.F. Malheiros, and J. Ferreira, Calphad 31, 438 (2007).10.1016/j.calphad.2007.05.002 ↗
9. C. Luef, A. Paul, J. Vizdal, A. Kroupa. A. Kodentsov and H. Ipser, Monats. Chem. 137, 381 (2006).
10. Z. Li, S. Knott, and A. Mikula, Acta Mater. 55, 2417 (2007).10.1016/j.actamat.2006.11.034 ↗
11. P. Areas, M. Alaoui-Elbelghitib, M. Gambinoa, and J.P. Brosa, Thermochim. Acta 346, 49–56 (2000).10.1016/S0040-6031(99)00409-8 ↗
12. C.K. Behera and A. Sonaye, Thermochim. Acta 568, 196 (2013).10.1016/j.tca.2013.06.039 ↗
13. C.K. Behera and M. Shamsuddin, Thermochim. Acta 487, 18 (2009).10.1016/j.tca.2009.01.004 ↗
14. M.R. Kumar, S. Mohan, and C.K. Behera, J. Electron. Mater. 45, 4314 (2016).10.1007/s11664-016-4574-6 ↗
15. N. Asryan and A. Mikula, Z. Metallk 95, 132 (2004).10.3139/146.017925 ↗
16. A. Yazawa and K. Koike, J. Min. Met. Inst. Japan 184, 1593 (1968).
17. G. Rickert, P. Lamparterand, S. Steeb, and Z. Natur, Teil A 31, 711 (1976).
18. W. Oelsen and K.F. Golucke, Arch. Eisenhuttenwes. 29, 689 (1958).
19. A. Yazawa, T. Kawashima, and K. Itagaki, J. Japan Inst. Met. 32, 1281 (1968).10.2320/jinstmet1952.32.12_1281 ↗
20. R.L. Sharkey and M.J. Pool, Metall. Trans. B 3, 1773 (1972).10.1007/BF02642560 ↗
21. O.J. Kleppa, J. Phys. Chem. 60, 846 (1956).10.1021/j150541a004 ↗
22. F.E. Wittig and P. Scheidt, Z. Phys. Chem. 28, 120 (1961).
23. J.P. Bros and M. Laffitte, J. Chem. Thermodyn 2, 151 (1970).10.1016/0021-9614(70)90074-1 ↗
24. R. Hultgren, P.D. Desai, D.T. Hawkins, M. Gleiser, and K.K. Kelley, ASM International (Ohio: Metals Park, 1973).
25. C. Luef, H. Flandorfer, and H. Ipser, Thermochim. Acta 417, 47 (2004).10.1016/j.tca.2004.01.019 ↗
26. B.J. Lee, C.S. Ohand, and J.H. Shim, J. Electron. Mater. 25, 983 (1996).
27. T.M. Korhonen and J.K. Kivilahti, J. Electron. Mater. 27, 149 (1998).10.1007/s11664-998-0205-1 ↗
28. N. David, K. Elaissaoui, J.M. Fiorani, J. Hertz, and M. Vilasi, ThermochimActa 413, 127 (2004).10.1016/j.tca.2003.10.020 ↗
29. A. Yakymovych, S. Mudry, C. Luef, and H. Ipser, Chem. Met. Alloys 1, 159 (2008).10.30970/cma1.0050 ↗
30. Z. Gregorczyk, L. Stawarzand, and E. Jurzyk, J. Chem. Thermodyn. 13, 647 (1981).
31. O. Kubaschewski and C.B. Alcock, Metallurgical Thermochemistry 5th edition New York (1979).
32. I. Ansara and N. Dupin, Cost 507 thermo chemical database for light metal alloys, in: European Commission DG X11, European Commission, Luxembourg, (1998).
33. C. Luef, A. Paul, H. Flandorfer, A. Kodentsov, and H. Ipser, J. Alloys Compd 391, 67 (2005).10.1016/j.jallcom.2004.08.056 ↗