journal article·2020-01

Surface Diffusion and the Interfacial Reaction in Cu/Sn/Ni Micro-Pillars

H. Y. Yu, T. H. Yang, Y. S. Chiu, C. R. Kao

Journal of Electronic Materials· Volume 49· Issue 1
Publisher page

Abstract

An electroplated Cu/Sn/Ni micro-bump was fabricated for analysis. After aging for different times, both the morphology and microstructure show significant changes, particularly after long-term aging. Because of the small aspect ratio of the micro-bump, surface diffusion has a strong effect on the morphology and roughness of the Cu/Sn and Cu/IMCs interfaces. A focused ion beam was applied for 3D reconstruction and used for calculation of the voiding rate of the micro-joint after 720 h of aging. In this way, the relationship between the voiding rate redistribution and the position along the radius direction was obtained. It is concluded that the redistribution of voids after long time aging is controlled by surface diffusion when almost all of the intermetallic compounds (IMCs) in the Cu/Sn/Ni micro-bump were transformed to Cu3Sn. Furthermore, as observed from the relationship between the voiding rate of the 5 μm and 10 μm samples and the position along the radius, when the diameter of the micro-bump decreases to 5 μm or even less than 5 μm, the total voiding rate of the sample after long-term aging rapidly increases, and a higher voiding rate has a strong influence on the reliability of the micro-joint and may lead to the failure of the electronic device.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. K.N. Tu and R.D. Thompson, Kinetics of interfacial reaction in bimetallic Cu-Sn thin films. Acta Metall. 30, 947 (1982).10.1016/0001-6160(82)90201-2 ↗
2. K.N. Tu, Interdiffusion and reaction in bimetallic Cu-Sn thin films. Acta Metall. 21, 347 (1973).10.1016/0001-6160(73)90190-9 ↗
3. C.R. Kao, Microstructures developed in solid-liquid reactions: using Cu-Sn reaction, Ni-Bi reaction, and Cu-In reaction as examples. Mater. Sci. Eng., A 238, 196 (1997).10.1016/S0921-5093(97)00449-8 ↗
4. C.K. Chung, J.G. Duh, and C.R. Kao, Direct evidence for a Cu-enriched region at the boundary between Cu6Sn5 and Cu3Sn during Cu/Sn reaction. Scr. Mater. 63, 258 (2010).10.1016/j.scriptamat.2010.04.011 ↗
5. K. Zeng, R. Stierman, T.C. Chiu, D. Edwards, K. Ano, and K.N. Tu, Kirkendall void formation in eutectic SnPb solder joints on bare Cu and its effect on joint reliability. J. Appl. Phys. 97, 024508 (2005).10.1063/1.1839637 ↗
6. J. Yu and J.Y. Kim, Effects of residual S on Kirkendall void formation at Cu/Sn–3.5Ag solder joints. Acta Mater. 56, 5514 (2008).10.1016/j.actamat.2008.07.022 ↗
7. Y.W. Wang, Y.W. Lin, and C.R. Kao, Kirkendall voids formation in the reaction between Ni-doped SnAg lead-free solders and different Cu substrates. Microelectron. Reliab. 49, 248 (2009).10.1016/j.microrel.2008.09.010 ↗
8. L. Yin and P. Borgesen, On the root cause of Kirkendall voiding in Cu3Sn. J. Mater. Res. 26, 455–466 (2011).10.1557/jmr.2010.47 ↗
9. C.M. Tsai, W.C. Luo, C.W. Chang, Y.C. Shieh, and C.R. Kao, Cross-interaction of under-bump metallurgy and surface finish in flip-chip solder joints. J. Electron. Mater. 33, 1424–1428 (2004).10.1007/s11664-004-0082-1 ↗
10. C.S. Liu, C.E. Ho, C.S. Peng, and C.R. Kao, Effects of joining sequence on the interfacial reactions and substrate dissolution behaviors in Ni/solder/Cu joints. J. Electron. Mater. 40, 1912–1920 (2011).10.1007/s11664-011-1666-1 ↗
11. C.E. Ho, S.C. Yang, and C.R. Kao, Interfacial reaction issues for lead-free electronic solders, in Lead-Free Electronic Solders (Springer, Boston, 2006), pp. 155–17410.1007/s10854-006-9031-5 ↗
12. K. Nogita and T. Nishimura, Nickel-stabilized hexagonal (Cu, Ni)6Sn5 in Sn-Cu-Ni lead-free solder alloys. Scr. Mater. 59, 191 (2008).10.1016/j.scriptamat.2008.03.002 ↗
13. K. Nogita, C.M. Gourlay, S.D. McDonald, Y.Q. Wu, J. Read, and Q.F. Gu, Kinetics of the η–η′ transformation in Cu6Sn5. Scr. Mater. 65, 922 (2011).10.1016/j.scriptamat.2011.07.058 ↗
14. D. Mu, J. Read, Y. Yang, and K. Nogita, Thermal expansion of Cu6Sn5 and (Cu, Ni)6Sn5. J. Mater. Res. 26, 2660 (2011).10.1557/jmr.2011.293 ↗
15. D. Mu, H. Huang, and K. Nogita, Anisotropic mechanical prop- erties of Cu6Sn5 and (Cu, Ni)6Sn5. Mater. Lett. 86, 46 (2012).10.1016/j.matlet.2012.07.018 ↗
16. L. Mo, C. Guo, Z. Zhou, F. Wu, and C. Liu, Microstructural evolution of Cu–Sn–Ni compounds in full intermetallic micro-joint and in situ micro-bending test. J. Mater. Sci.: Mater. Electron. 29, 11920 (2018).
17. Y.S. Kaganovskii, L.N. Paritskaya, and W. Lojkowski, Surf. Sci. 454–456, 591 (2000).10.1016/S0039-6028(00)00276-4 ↗
18. H.K. Cheng, Y.J. Lin, H.C. Chang, K.C. Liu, Y.L. Wang, T.F. Liu, and C.M. Chen, Metall. Mater. Trans. A 46, 1834 (2015).10.1007/s11661-015-2825-4 ↗
19. H.W. Yang, J.Y. Wu, Z.X. Zhu, and C.R. Kao, Effects of surface diffusion and reaction-induced volume shrinkage on morphological evolutions of micro joints. Mater. Chem. Phys. 191, 13–19 (2017).10.1016/j.matchemphys.2017.01.022 ↗
20. H.W. Yang, H.Y. Yu, and C.R. Kao, Critical factors affecting structural transformations in 3D IC micro joints, in Electronic Components and Technology Conference (ECTC), 2017 IEEE 67th (IEEE, 2017), pp. 1008–101310.1109/ECTC.2017.98 ↗
21. http://www.geocities.jp/sato5fu/L-Vreview.htm . Accessed 22 May 2016