journal article·2019-01

Conductive Ink Prepared by Microwave Method: Effect of Silver Content on the Pattern Conductivity

Tinghao Du, Chengli Tang, Bo Xing, Yebo Lu, Fengli Huang, Chuncheng Zuo

Journal of Electronic Materials· Volume 48· Issue 1
Publisher page

Abstract

A facile one-step microwave approach was employed to synthesize silver nanoparticle (AgNP) conductive ink. The conductive ink contained multi-sized silver nanoparticles. Different particle size distribution can be obtained by adding different amounts of the silver source. The relationship between the conductivity of the direct written pattern using the as-prepared silver conductive ink, the particle packing morphology and the particle size distribution standard deviation was investigated. Among all the samples, conductive ink with a silver weight percentage of 10% can have an optimal electrical resistance of 98 μΩ cm after post-hot/pressure treatment at 100°C and 20 MPa for 10 min. The as-prepared conductive ink is of potential application in printed electronics because the sintering condition of low temperatures is feasible for most kinds of flexible substrate materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanomaterials and Printing Technologies · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. B. Wittbrodt and J.M. Pearce, Energy Sustain. Dev. 36, 1 (2017).10.1016/j.esd.2016.08.001 ↗
2. H. Lee, H. Lim, S. Park, and D. Lee, Opt. Express 24, A1571 (2016).10.1364/OE.24.0A1571 ↗
3. C.M. Homenick, R. James, G.P. Lopinski, J. Dunford, J.F. Sun, H. Park, Y. Jung, G. Cho, and P.R. Malenfant, ACS Appl. Mater. Inter 8, 27900 (2016).10.1021/acsami.6b06838 ↗
4. H.J. Kwon, S. Chung, J. Jang, and C.P. Grigoropoulos, Nanotechnology 27, 405301 (2016).10.1088/0957-4484/27/40/405301 ↗
5. Y.X. Gao, R. Liu, X.P. Wang, J. Liu, and Q.F. Fang, J. Electron. Packag 138, 031007 (2016).10.1115/1.4034062 ↗
6. G.A. dos Reis Benatto, B. Roth, M. Corazza, R.R. Sondergaard, S.A. Gevorgyan, M. Jorgensen, and F.C. Krebs, Nanoscale 8, 318 (2016).10.1039/C5NR07426F ↗
7. L.H. Huang, P. Jiang, D. Wang, Y.F. Luo, M.F. Li, H. Lee, and R.A. Gerhardt, Sens. Actuator B-Chem 197, 308 (2014).10.1016/j.snb.2014.02.081 ↗
8. M.D. Dankoco, G.Y. Tesfay, E. Benevent, and M. Bendanhan, Mater. Sci. Eng. B-Adv. 205, 1 (2016).10.1016/j.mseb.2015.11.003 ↗
9. J.H. Yu, S.Y. Kim, and J. Hwang, Appl. Phys. A 89, 157 (2007).10.1007/s00339-007-4210-7 ↗
10. F. Wang, P. Mao, and H. He, Sci. Rep. 6, 21398 (2016).10.1038/srep21398 ↗
11. B. Reiser, L. Gonzalez-Garcia, I. Kanelidis, J.H.M. Maurer, and T. Kraus, Chem. Sci. 7 (2016).10.1039/C6SC00142D ↗
12. J. Ding, J. Liu, Q.Y. Tian, Z.H. Wu, W.J. Yao, Z.G. Dai, L. Liu, and W. Wu, Nanoscale Res. Lett. 11, 412 (2016).10.1186/s11671-016-1640-1 ↗
13. C.L. Tang, B. Xing, G.S. Hu, F.L. Huang, and C.C. Zuo, Mater. Lett. 188, 220 (2017).10.1016/j.matlet.2016.11.009 ↗
14. C.C. Furnas, Ind. Eng. Chem. 23, 1052 (1931).10.1021/ie50261a017 ↗
15. R.M. German, Metall. Trans. A 23, 1455 (1992).10.1007/BF02647329 ↗
16. G.S. Hu, C.C. Zuo, F.L. Huang, C.L. Tang, and L.B. Zhang, Electron. Compon. Mater. 35, 71 (2016).
17. M. Randall, Sintering Theory and Practice, 1st ed. (New York: Wiley, 1996), pp. 384–426.
18. L.S.J. Kang, Sintering: Densification, Grain Growth, and Microstructure (Oxford: Elsevier, Butterworth-Heinemann, 2005), pp. 674–742.
19. R.M. German, Metall. Trans. A 23, 1455 (1992).10.1007/BF02647329 ↗
20. K. Woo, D. Kim, J.S. Kim, S. Lim, and J. Moon, Langmuir 25, 429 (2009).10.1021/la802182y ↗
21. P. Buffat, Thin Solid Films 32, 283 (1976).10.1016/0040-6090(76)90315-1 ↗