High-Performance Spray-Deposited Indium Doped ZnO Thin Film: Structural, Morphological, Electrical, Optical, and Photoluminescence Study
Source abstract
Abstract
In this study, high-quality indium doped zinc oxide thin films were deposited using the spray pyrolysis technique, and the substrate temperature varied from 450°C to 550°C with steps of 25°C with the aim of investigating the effect of substrate temperature. It was found that as the temperature increased, the resistivity of the films decreased to the extent that it was as low as 5.34 × 10−3 Ω cm for the one deposited at 500°C; however, it slightly increased for the resulting film at 550°C. Although the carrier concentration mostly increased with temperature, it appeared that the carrier mobility was the parameter mainly governing the conductivity variation. In addition, the average transparency of the deposited films at 500°C, 525°C and 550°C was around 87% (400–800 nm), which makes them outstanding transparent conductive oxide films. Moreover, the crystallite size and strain of the resulting films were estimated via the Williamson–Hall method. The results revealed a considerable reduction in the crystallite size and strain up to 500°C followed by a rise at higher substrate temperature. Based on both the surface and cross-section field emission scanning electron microscope images, the film resulting at 500°C was highly compacted and crack free, which can explain the enlargement of the carrier mobility (10.9 cm2 V−1 s−1) in this film. Finally, a detailed photoluminescence study revealed several peaks in the spectrum and the variation of the two major peaks appeared to have correlation with the carrier concentration.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Gas Sensing Nanomaterials and Sensors · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. J. Huang, S. Chu, J. Kong, L. Zhang, C.M. Schwarz, G. Wang, L. Chernyak, Z. Chen, and J. Liu, Adv. Opt. Mater. 1, 179 (2013).10.1002/adom.201200062 ↗
2. H.Z. Asl and S.M. Rozati, J. Mater. Sci. Mater. Electron. 29, 4365 (2018).10.1007/s10854-017-8385-1 ↗
3. P.S. Mbule, T.H. Kim, B.S. Kim, H.C. Swart, and O.M. Ntwaeaborwa, Sol. Energy Mater. Sol. Cells 112, 6 (2013).10.1016/j.solmat.2013.01.010 ↗
4. K. Khojier, J. Electron. Mater. 46, 5889 (2017).10.1007/s11664-017-5583-9 ↗
5. S. Anandan, N. Ohashi, and M. Miyauchi, Appl. Catal. B 100, 502 (2010).10.1016/j.apcatb.2010.08.029 ↗
6. W. Han, Y. Zhou, Y. Zhang, C.-Y. Chen, L. Lin, X. Wang, S. Wang, and Z.L. Wang, ACS Nano 6, 3760 (2012).10.1021/nn301277m ↗
7. E. Zaleta-Alejandre, J. Camargo-Martinez, A. Ramirez-Garibo, M.L. Pérez-Arrieta, R. Balderas-Xicohténcatl, Z. Rivera-Alvarez, M. Aguilar-Frutis, and C. Falcony, Thin Solid Films 524, 44 (2012).10.1016/j.tsf.2012.09.050 ↗
8. A.G. Cuevas, K. Balangcod, T. Balangcod, and A. Jasmin, Proc. Eng. 68, 537 (2013).10.1016/j.proeng.2013.12.218 ↗
9. A. Rečnik, S. Bernik, and N. Daneu, J. Mater. Sci. 47, 1655 (2012).10.1007/s10853-011-5937-2 ↗
10. F. Zahedi, R.S. Dariani, and S.M. Rozati, Mater. Sci. Semicond. Process. 16, 245 (2013).10.1016/j.mssp.2012.11.005 ↗
11. T. Tynell and M. Karppinen, Semicond. Sci. Technol. 29, 043001 (2014).10.1088/0268-1242/29/4/043001 ↗
12. S. Pearton, Prog. Mater Sci. 50, 293 (2005).10.1016/j.pmatsci.2004.04.001 ↗
13. S.O. Kucheyev, J.E. Bradby, J.S. Williams, C. Jagadish, and M.V. Swain, Appl. Phys. Lett. 80, 956 (2002).10.1063/1.1448175 ↗
14. Y. Song, E.S. Kim, and A. Kapila, J. Electron. Mater. 24, 83 (1995).10.1007/BF02659626 ↗
15. S. Salari, M. Ahmadi, and K. Mirabbaszadeh, Electron. Mater. Lett. 10, 13 (2014).10.1007/s13391-013-3140-0 ↗
16. A.S. Pugalenthi, R. Balasundaraprabhu, V. Gunasekaran, N. Muthukumarasamy, S. Prasanna, and S. Jayakumar, Mater. Sci. Semicond. Process. 29, 176 (2015).10.1016/j.mssp.2014.02.014 ↗
17. Y.J. Li, Y.W. Heo, J.M. Erie, H. Kim, K. Ip, S.J. Pearton, and D.P. Norton, J. Electron. Mater. 35, 530 (2006).10.1007/s11664-006-0095-z ↗
18. A. Abrutis, L. Silimavicius, V. Kubilius, T. Murauskas, Z. Saltyte, and V. Plausinaitiene, Thin Solid Films 576, 88 (2015).10.1016/j.tsf.2015.01.010 ↗
19. O. Matthias, G. Stephan, A. Matthias, B. Thomas, and G. Rudolf, J. Phys. D Appl. Phys. 47, 034002 (2014).10.1088/0022-3727/47/3/034002 ↗
20. M. Eslamian, Coatings 4, 60 (2014).10.3390/coatings4010060 ↗
21. S.M. Rozati and S. Akesteh, Mater. Charact. 58, 319 (2007).10.1016/j.matchar.2006.05.012 ↗
22. S.M. Rozati, F. Zarenejad, and N. Memarian, Thin Solid Films 520, 1259 (2011).10.1016/j.tsf.2011.04.200 ↗
23. L. Castañeda, A. Maldonado, J. Vega Pérez, M. de la Olvera, and C. Torres-Torres, Mater. Sci. Semicond. Process. 26, 288 (2014).10.1016/j.mssp.2014.05.011 ↗
24. W. Yan, J. Tan, W. Zhang, Y. Liang, S. Feng, X. Lei, and H. Wang, Superlattices Microstruct. 60, 407 (2013).10.1016/j.spmi.2013.05.021 ↗
25. V.K. Jayaraman, A.M. Álvarez, and M. del la Olvera Amador, Phys. E 86, 164 (2017).10.1016/j.physe.2016.10.029 ↗
26. N.L. Tarwal, K.V. Gurav, T. Prem Kumar, Y.K. Jeong, H.S. Shim, I.Y. Kim, J.H. Kim, J.H. Jang, and P.S. Patil, J. Anal. Appl. Pyrolysis 106, 26 (2014).10.1016/j.jaap.2013.12.005 ↗
27. A. Hadri, M. Taibi, M. Loghmarti, C. Nassiri, T. Slimani Tlemçani, and A. Mzerd, Thin Solid Films 601, 7 (2016).10.1016/j.tsf.2015.11.036 ↗
28. L. Castañeda, A. Maldonado, A. Escobedo-Morales, M. Avendaño-Alejo, H. Gómez, J. Vega-Pérez, and M. de la Olvera, Mater. Sci. Semicond. Process. 14, 114 (2011).10.1016/j.mssp.2011.01.013 ↗
29. J. Wienke and A.S. Booij, Thin Solid Films 516, 4508 (2008).10.1016/j.tsf.2007.05.078 ↗
30. W.J. Aziz and A.K. Jarhallah, Optik 126, 2771 (2015).10.1016/j.ijleo.2015.07.007 ↗
31. M. Vent, E. Kärber, T. Unt, A. Mere, and M. Krunks, Phys. Status Solidi C 9, 1604 (2012).10.1002/pssc.201200008 ↗
32. G.A. Velázquez-Nevárez, J.R. Vargas-García, J. Aguilar-Hernández, O.E. Vega-Becerra, F. Chen, Q. Shen, and L. Zhang, Mater. Res. 19, 113 (2016).10.1590/1980-5373-mr-2016-0808 ↗
33. C.S. Prajapati and P.P. Sahay, Mater. Sci. Semicond. Process. 16, 200 (2013).10.1016/j.mssp.2012.04.015 ↗
34. H. Behzad and F.E. Ghodsi, J. Mater. Sci. Mater. Electron. 27, 6096 (2016).10.1007/s10854-016-4535-0 ↗
35. S.-M. Park, T. Ikegami, and K. Ebihara, Thin Solid Films 513, 90 (2006).10.1016/j.tsf.2006.01.051 ↗
36. H. Belkhalfa, H. Ayed, A. Hafdallah, M.S. Aida, and R.T. Ighil, Optik 127, 2336 (2016).10.1016/j.ijleo.2015.11.126 ↗
37. H.Z. Asl and S.M. Rozati, J. Electron. Mater. 46, 5020 (2017).10.1007/s11664-017-5510-0 ↗
38. B. Joseph, P.K. Manoj, and V.K. Vaidyan, Bull. Mater. Sci. 28, 487 (2005).10.1007/BF02711242 ↗
39. S. Calnan and A.N. Tiwari, Thin Solid Films 518, 1839 (2010).10.1016/j.tsf.2009.09.044 ↗
40. K.H. Yoon and J.Y. Cho, Mater. Res. Bull. 35, 39 (2000).10.1016/S0025-5408(00)00183-5 ↗
41. S.S. Shinde, P.S. Shinde, S.M. Pawar, A.V. Moholkar, C.H. Bhosale, and K.Y. Rajpure, Solid State Sci. 10, 1209 (2008).10.1016/j.solidstatesciences.2007.11.031 ↗
42. A.S. Hassanien and A.A. Akl, Superlattices Microstruct. 89, 153 (2016).10.1016/j.spmi.2015.10.044 ↗
43. H.Z. Asl and S.M. Rozati, Mater. Res. (2018). https://doi.org/10.1590/1980-5373-mr-2017-0754 .10.1590/1980-5373-mr-2017-0754 ↗
44. E. Burstein, Phys. Rev. 93, 632 (1954).10.1103/PhysRev.93.632 ↗
45. T.S. Moss, Proc. Phys. Soc. Lond. Sect. B 67, 775 (1954).10.1088/0370-1301/67/10/306 ↗
46. S. Edinger, N. Bansal, M. Bauch, R.A. Wibowo, G. Újvári, R. Hamid, G. Trimmel, and T. Dimopoulos, J. Mater. Sci. 52, 8591 (2017).10.1007/s10853-017-1084-8 ↗
47. A. Hafdallah, F. Yanineb, M.S. Aida, and N. Attaf, J. Alloys Compd. 509, 7267 (2011).10.1016/j.jallcom.2011.04.058 ↗
48. F. Urbach, Phys. Rev. 92, 1324 (1953).10.1103/PhysRev.92.1324 ↗
49. C.E. Benouis, M. Benhaliliba, A. Sanchez Juarez, M.S. Aida, F. Chami, and F. Yakuphanoglu, J. Alloys Compd. 490, 62 (2010).10.1016/j.jallcom.2009.10.098 ↗
50. S. Benramache and B. Benhaoua, Superlattices Microstruct. 52, 1062 (2012).10.1016/j.spmi.2012.08.006 ↗
51. P.M. Ratheesh Kumar, C.S. Kartha, and K.P. Vijayakumar, J. Appl. Phys. 98, 023509 (2005).10.1063/1.1985967 ↗
52. B. Lin, Z. Fu, and Y. Jia, Appl. Phys. Lett. 79, 943 (2001).10.1063/1.1394173 ↗
53. Z. Liang, X. Yu, B. Lei, P. Liu, and W. Mai, J. Alloys Compd. 509, 5437 (2011).10.1016/j.jallcom.2011.02.084 ↗
54. J.W. Zhang, G. He, T.S. Li, M. Liu, X.S. Chen, Y.M. Liu, and Z.Q. Sun, Mater. Res. Bull. 65, 7 (2015).10.1016/j.materresbull.2015.01.004 ↗
55. P.M.R. Kumar, C.S. Kartha, K.P. Vijayakumar, F. Singh, D.K. Avasthi, T. Abe, Y. Kashiwaba, G.S. Okram, M. Kumar, and S. Kumar, J. Appl. Phys. 97, 013509 (2005).10.1063/1.1823574 ↗
56. S. Wei, J. Lian, and H. Wu, Mater. Charact. 61, 1239 (2010).10.1016/j.matchar.2010.08.002 ↗