journal article·2017-12Open access

Surface Studies on HgCdTe Using Non-aqueous Iodine-Based Polishing Solution

Radheshyam Nokhwal, Vanya Srivastav, Anshu Goyal, B. L. Sharma, S. A. Hashmi, R. K. Sharma

Journal of Electronic Materials· Volume 46· Issue 12

Abstract

Bromine- and iodine-based solutions were compared for surface preparation of HgCdTe epilayers. The iodine (I)–potassium iodide (KI)-based non-aqueous solution for surface preparation of mercury cadmium telluride (HgCdTe) epilayers is less corrosive, less toxic and technologically more suitable compared to the widely used bromine-based etchants. It provides improved surface morphology and a lower amount of oxides. A comparative study of the oxide content and elemental tellurium residue on the polished surface was made by x-ray photoelectron spectrometry measurements. Least elemental Te content was observed on the HgCdTe surface polished with I-KI solution as compared to bromine-based etchants. It may result in reduced trap density at the surface of HgCdTe. The possibility of potassium diffusion due to I-KI polishing at the HgCdTe surface, as well as at the cadmium zinc telluride (CdZnTe)–HgCdTe interface, has been ruled out using secondary ion mass spectrometry. Performance of photodiodes fabricated on the polished epilayers (Hg0.7Cd0.3Te) was assessed and the zero bias dynamic resistance area product (R0A) was measured as >5 × 104 Ω cm2 under stray illumination.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Semiconductor Detectors and Materials · Chalcogenide Semiconductor Thin Films · Machine Learning in Materials Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. A. Rogalski, Opto Electron. Rev. 20, 279 (2012).10.2478/s11772-012-0037-7 ↗
2. A.J. Stoltz, J.D. Benson, M. Jaime-Vasquez, P.J. Smith, L.A. Almeida, R. Jacobs, J. Markunas, K. Brogden, A. Brown, C. Lennon, P. Maloney, and N. Supola, J. Electron. Mater. 43, 3708 (2014).10.1007/s11664-014-3281-4 ↗
3. R. Nokhwal, A. Pandey, B. L. Sharma, P. Sharma, P. Garg, S. A. Hashmi, and R. K. Sharma, Environmental Science and Engineering, p. 829 (Springer International Publishing, Cham, 2013).10.1007/978-3-319-03002-9_214 ↗
4. V.G. Kesler and E.R. Zakirov, Int. Conf. Young Spec. Micro/Nanotechnol. Electron. Dev. EDM 2, 33 (2014).
5. V. Srivastav, R. Pal, and H.P. Vyas, Opto Electron. Rev. 13, 197 (2005).
6. B.H. Erné, F. Lefèvre, D. Lorans, D. Ballutaud, C. Debiemme-Chouvy, J. Vigneron, and A. Etcheberry, Appl. Surf. Sci. 175–176, 579 (2001).10.1016/S0169-4332(01)00125-8 ↗
7. P.W. Leech, P.J. Gwynn, and M.H. Kibel, Appl. Surf. Sci. 37, 291 (1989).10.1016/0169-4332(89)90491-1 ↗
8. W.J. Danaher, L.E. Lyons, M. Marychurch, and G.C. Morris, Appl. Surf. Sci. 27, 338 (1986).10.1016/0169-4332(86)90138-8 ↗
9. R. Sporken, R. Kiran, T. Casselman, F. Aqariden, S. Velicu, Y. Chang, and S. Sivananthan, J. Electron. Mater. 38, 1781 (2009).10.1007/s11664-009-0844-x ↗
10. M.Y. Lee, Y.S. Lee, and H.C. Lee, Appl. Phys. Lett. 88, 204101–204111 (2006).10.1063/1.2203940 ↗
11. P. Moravec, Z.F. Tomashik, V.G. Ivanits’Ka, V.M. Tomashik, J. Franc, K. Mašek, and P. Höschl, J. Electron. Mater. 41, 2838 (2012).10.1007/s11664-012-2001-1 ↗
12. F. Aqariden, S. Tari, K. Nissanka, J. Li, N. Kioussis, R.E. Pimpinella, and M. Dobrowolska, J. Electron. Mater. 41, 2893 (2012).10.1007/s11664-012-2126-2 ↗
13. R. Nokhwal, R.S. Saxena, B.L. Sharma, A. Kumar, S.A. Hashmi, and R.K. Sharma, Infrared Phys. Technol. 71, 378 (2015).10.1016/j.infrared.2015.05.016 ↗
14. W.H. Chang, T. Lee, and W.M. Lau, J. Appl. Phys. 68, 4816 (1990).10.1063/1.346139 ↗
15. P. Alto, P.P. Data, D. Joshua, R. Cited, C. Cochran, A.J. Fusco, and E. Al., “United States Patent,” 4600469, 2005.
16. J.S. Kim, Y.H. Kim, B.K. Kim, and H.J. Je, Solid State Electron. 48, 1623 (2004).10.1016/j.sse.2004.02.018 ↗
17. J. Giess, J.E. Hails, A. Graham, G. Blackmore, M.R. Houlton, J. Newey, M.L. Young, M.G. Astles, W. Bell, and D.J. Cole-Hamilton, J. Electron. Mater. 24, 1149 (1995).10.1007/BF02653067 ↗
18. D.R. Rhiger and R.E. Kvaas, J. Vac. Sci. Technol. A Vac. Surf. Film 1, 1712 (1983).10.1116/1.572214 ↗
19. M. Seelmann-Eggebert, G. Brandt, and H.J. Richter, J. Vac. Sci. Technol. A Vac. Surf. Film 2, 11 (1984).10.1116/1.572616 ↗
20. A. B. Christie, I. Sutherland, and J. M. Walls, Surf. Sci. 135, 225 (1983).10.1016/0039-6028(83)90220-0 ↗
21. A.J. Ricco, J. Vac. Sci. Technol. A Vac. Surf. Film 2, 910 (1984).10.1116/1.572547 ↗
22. B.V.R. Chowdari and P. Pramoda Kumari, J. Non Cryst. Solids 197, 31 (1996).10.1016/0022-3093(95)00548-X ↗
23. F. Garbassi, J.C.J. Bart, and G. Petrini, J. Electron. Spectros. Relat. Phenom. 22, 95 (1981).10.1016/0368-2048(81)80019-9 ↗
24. J.B. Varesi, J.D. Benson, M. Jaime-Vasquez, M. Martinka, A.J. Stoltz, and J.H. Dinan, J. Electron. Mater. 35, 1443 (2006).10.1007/s11664-006-0281-z ↗
25. J.S. Hammond, S.W. Gaarenstroom, and N. Winograd, Anal. Chem. 47, 2193 (1975).10.1021/ac60363a019 ↗
26. R.S. Saxena, R. Nokhwal, R.K. Bhan, and R.K. Sharma, Infrared Phys. Technol. 56, 69 (2013).10.1016/j.infrared.2012.10.005 ↗
27. E. Finkman, J. Vac. Sci. Technol. A Vac. Surf. Film 7, 464 (1989).10.1116/1.576204 ↗
28. P. Madejczyk, A. Piotrowski, K. Kłos, W. Gawron, A. Rogalski, J. Rutkowski, and W. Mróz, Bull. Polish Acad. Sci. Tech. Sci. 57, 139 (2010).