journal article·2010-09

Effects of Pulsed Laser Deposition Conditions on the Microstructure of Ca3Co4O9 Thin Films

Ting Sun, Huey Hoon Hng, Qingyu Yan, Jan Ma

Journal of Electronic Materials· Volume 39· Issue 9
Publisher page

Abstract

The influence of deposition conditions on the microstructure of Ca3Co4O9 (CCO) thin films fabricated by the pulsed laser deposition technique was investigated. X-ray diffraction revealed that a fast deposition rate resulted in not only low crystallinity but also the existence of the Ca x CoO2 secondary phase. The Ca x CoO2 structure was further confirmed by high-resolution transmission electron microscopy. The CCO thin-film growth was deduced to be a kinetically controlled process, and the quality of the thin films strongly depended on the coalescence process. The formation of Ca x CoO2 was inevitable during the thin-film growth. However, given enough time and supply of oxygen at a lower deposition rate, it was possible to transform the Ca x CoO2 phase into the desired CCO phase during the coalescence process, while with faster deposition, more Ca x CoO2 structure was formed, and the secondary phase could hardly transform into the CCO phase.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Electronic and Structural Properties of Oxides · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. F.J. DiSalvo, Science 285, 703 (1999). doi: 10.1126/science.285.5428.703 .10.1126/science.285.5428.703 ↗
2. I. Terasaki, Y. Sasago, and K. Uchinokura, Phys. Rev. B 56, R12685 (1997). doi: 10.1103/PhysRevB.56.R12685 .10.1103/PhysRevB.56.R12685 ↗
3. A.C. Masset, C. Michel, A. Maignan, M. Hervieu, O. Toulemonde, F. Studer, B. Raveau, and J. Hejtmanek, Phys. Rev. B 62, 166 (2000). doi: 10.1103/PhysRevB.62.166 .10.1103/PhysRevB.62.166 ↗
4. M. Shikano and R. Funahashi, Appl. Phys. Lett. 82, 1851 (2003). doi: 10.1063/1.1562337 .10.1063/1.1562337 ↗
5. L.D. Hicks and M.S. Dresselhaus, Phys. Rev. B 47, 12727 (1993). doi: 10.1103/PhysRevB.47.12727 .10.1103/PhysRevB.47.12727 ↗
6. R. Venkatasubramanian, E. Siivola, T. Colpitts, and B. O’Quinn, Nature 413, 597 (2001). doi: 10.1038/35098012 .10.1038/35098012 ↗
7. T. Terada, Y. Yoshida, M. Ueno, and Y. Takai, J. Ceram. Soc. Jpn. 110, 560 (2002).10.2109/jcersj.110.560 ↗
8. A. Sakai, T. Kanno, S. Yotsuhashi, A. Odagawa, and H. Adachi, Jpn. J. Appl. Phys. 44, L966 (2005). doi: 10.1143/JJAP.44.L966 .10.1143/JJAP.44.L966 ↗
9. Y.F. Hu, W.D. Si, E. Sutter, and Q. Li, Appl. Phys. Lett. 86, 082103 (2005). doi: 10.1063/1.1868873 .10.1063/1.1868873 ↗
10. K. Sugiura, H. Ohta, K. Nomura, M. Hirano, H. Hosono, and K. Koumoto, Appl. Phys. Lett. 89, 032111 (2006). doi: 10.1063/1.2234277 .10.1063/1.2234277 ↗
11. H.U. Habermeier, Mater. Today 10, 34 (2007). doi: 10.1016/S1369-7021(07)70243-2 .10.1016/S1369-7021(07)70243-2 ↗
12. S.R. Gilbert, L.A. Wills, B.W. Wessels, J.L. Schindler, J.A. Thomas, and C.R. Kannewurf, J. Appl. Phys. 80, 969 (1996). doi: 10.1063/1.362909 .10.1063/1.362909 ↗
13. B.L. Cushing and J.B. Wiley, J. Solid State Chem. 141, 385 (1998). doi: 10.1006/jssc.1998.7957 .10.1006/jssc.1998.7957 ↗
14. J.S. Horwitz and J.A. Sprague, Pulsed Laser Deposition of Thin Films, ed. D.B. Chrisey and G.K. Hubler (New York: Wiley, 1994), p. 229.
15. H.W. Eng, W. Prellier, S. Hebert, D. Grebille, L. Mechin, and B. Mercey, J. Appl. Phys. 97, 013706 (2005). doi: 10.1063/1.1823582 .10.1063/1.1823582 ↗
16. Y.F. Hu, E. Sutter, W.D. Si, and Q. Li, Appl. Phys. Lett. 87, 171912 (2005). doi: 10.1063/1.2117615 .10.1063/1.2117615 ↗
17. T. Kanno, S. Yotsuhashi, and H. Adachi, Appl. Phys. Lett. 85, 739 (2004). doi: 10.1063/1.1776310 .10.1063/1.1776310 ↗
18. H. Itahara, W.S. Seo, S. Lee, H. Nozaki, T. Tani, and K. Koumoto, J. Am. Chem. Soc. 127, 6367 (2005). doi: 10.1021/ja0434883 .10.1021/ja0434883 ↗