ZnO/PPy Hybrid Heterojunction as an Ultraviolet Photosensor
Source abstract
Abstract
The electrodeposition method was used to deposit a zinc oxide (ZnO) layer on an indium tin oxide substrate. Polypyrrole (PPy) was deposited also by the electrodeposition method on the same ZnO layer to form a ZnO/PPy interface. Scanning electron microscopy was performed to investigate the morphology of the organic–inorganic interface. The p–n junction so formed was subjected to electrical studies. The junction was found to be sensitive to exposure to ultraviolet light, which increased the junction’s current density. The diode was found to have an open-circuit voltage (V oc) of 0.518 V and a short-circuit current density (J sc) of 9.86 × 10−7 A/cm2. The fill factor was estimated to be 0.37 with a rectification ratio of 93. Photoluminescence studies revealed quenching of the excitonic emission at the ZnO/PPy interface. The interface is thus found to be responsible for the effective separation of charge carriers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials · Analytical Chemistry and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. S. Panigrahi, A. Bera, and D. Basak, J. Colloid Interface Sci. 353, 30 (2011).10.1016/j.jcis.2010.09.055 ↗
2. A. Bera, T. Ghosh, and D. Basak, ACS Appl. Mater. Interface 2, 2898 (2010).10.1021/am1006047 ↗
3. T. Ghosh and D. Basak, Nanotechnology 21, 375202 (2010).10.1088/0957-4484/21/37/375202 ↗
4. S. Panigrahi and D. Basak, Nanoscale 3, 2336 (2011).10.1039/c1nr10064e ↗
5. S. Krishnamoorthy and A.A. Iliadis, Solid State Electron. 52, 1710 (2008).10.1016/j.sse.2008.06.039 ↗
6. M.A. Alim, S. Li, F. Liu, and P. Cheng, Phys. Status Solidi 203, 410 (2006).10.1002/pssa.200521084 ↗
7. L. Lu, R. Li, K. Fan, and T. Peng, Sol. Energy 84, 844 (2010).10.1016/j.solener.2010.02.010 ↗
8. L.A. Patil, A.R. Bari, M.D. Shinde, and Vinita. Deo, Sens. Actuators B 149, 79–86 (2010).10.1016/j.snb.2010.06.027 ↗
9. M. Dutta and D. Basak, Chem. Phys. Lett. 480, 253 (2009).10.1016/j.cplett.2009.09.024 ↗
10. K. Kagawa, P. Qian, A. Tanaka, and T.M. Swager, Synth. Met. 157, 733 (2007).10.1016/j.synthmet.2007.07.011 ↗
11. D. Baran, A. Balan, B.M. Esteban, H. Neugebauer, N.S. Sariciftci, and L. Toppare, Macromol. Chem. Phys. 211, 2602 (2010).10.1002/macp.201000371 ↗
12. L.A. Mashat, H.D. Tran, W. Wlodarski, R.B. Kaner, and K.K. Zadeh, Sens. Actuators B 134, 826 (2008).10.1016/j.snb.2008.06.030 ↗
13. N.O. Savage, Sens. Actuators B 143, 6 (2009).10.1016/j.snb.2009.08.052 ↗
14. C. Goh, S.R. Scully, and M.D. McGehee, J. Appl. Phys. 101, 114503 (2007).10.1063/1.2737977 ↗
15. C.J. Novotny, E.T. Yu, and P.K.L. Yu, Nano Lett. 8, 775 (2008).10.1021/nl072372c ↗
16. S. Mridha and D. Basak, Appl. Phys. Lett. 92, 142111 (2008).10.1063/1.2898399 ↗
17. S. Blumstengel, S. Sadofev, and F. Henneberger, New J. Phys. 10, 065010 (2008).10.1088/1367-2630/10/6/065010 ↗
18. G.M. Kumar, V. Raman, J. Kawakita, P. Ilanchezhiyan, and R. Jayavel, Dalton Trans. 39, 8325 (2010).10.1039/c0dt00167h ↗
19. R. Konenkamp, R.C. Word, and M. Godinez, Nano Lett. 5, 2005 (2005).10.1021/nl051501r ↗
20. D.U. Lee, D. Pradhan, R. Mouawia, D.H. Oh, N.F. Heinig, K.T. Leung, and E. Prouzet, Chem. Mater. 22, 218 (2010).10.1021/cm902770d ↗
21. S.Y. Lu and I.H. Lin, J. Phys. Chem. B 107, 6974 (2003).
22. N.K. Singh, N. Tripathi, S. Rath, and S. Annapoorni, J. Nanosci. Nanotechnol. 9, 1 (2009).10.1166/jnn.2009.J01a ↗
23. M.A. Chougule, S. Sen, and V.B. Patil, J. Appl. Polym. Sci. 125, 541 (2012).10.1002/app.36475 ↗
24. P. Ravirajan, A.M. Peiro, M.K. Nazeeruddin, M. Graetzel, D.D.C. Bradley, J.R. Durrant, and J. Nelson, J. Phys. Chem. B 110, 7635 (2006).10.1021/jp0571372 ↗
25. Y. Guo, Q. Tang, H. Liu, Y. Zhang, Y. Li, W. Hu, S. Wang, and D. Zu, J. Am. Chem. Soc. 130, 9198 (2008).10.1021/ja8021494 ↗
26. Z. Yuan, J. Yu, N. Wang, and Y. Jiang, Curr. Appl. Phys. 12, 1278 (2012).10.1016/j.cap.2012.03.011 ↗
27. R.C. Wang and H.Y. Lin, Sens. Actuators B 149, 94 (2010).10.1016/j.snb.2010.06.025 ↗
28. H. Wang, L. Wang, C. Qu, Y. Su, S. Yu, W. Zheng, and Y. Liu, J. Solid State Chem. 184, 881 (2011).10.1016/j.jssc.2011.02.025 ↗
29. S. Gupta, Appl. Phys. Lett. 88, 063108 (2006).10.1063/1.2168688 ↗
30. K. Crowley and J. Cassidy, J. Electroanal. Chem. 547, 75 (2003).10.1016/S0022-0728(03)00191-8 ↗
31. N. Su, H.B. Li, S.J. Yuan, S.P. Yi, and E.Q. Yin, Express Polym. Lett. 6, 697 (2012).10.3144/expresspolymlett.2012.75 ↗
32. F. Chen, G. Shi, M. Fu, L. Xu, and X. Hong, Synth. Met. 132, 125 (2003).10.1016/S0379-6779(02)00197-2 ↗
33. N.K. Singh, S. Shrivastava, S. Rath, and S. Annapoorni, Appl. Surf. Sci. 257, 1544 (2010).10.1016/j.apsusc.2010.08.093 ↗
34. M. Dutta, S. Jana, and D. Basak, ChemPhysChem 11, 1587 (2010).10.1002/cphc.200900960 ↗