Dimensional Analysis of Thermoelectric Modules Under Constant Heat Flux
Source abstract
Abstract
Thermoelectric power generation is examined in the case of radiative heating. A constant heat flux is assumed in addition to consideration of the Seebeck effect, Peltier effect, and Joule heating with temperature-dependent material properties. Numerical evaluations are conducted using a combination of the finite-volume method and an original simultaneous solver for the heat transfer, thermoelectric, and electric transportation phenomena. Comparison with experimental results shows that the new solver could work well in the numerical calculations. The calculations predict that the Seebeck effect becomes larger for longer thermoelectric elements because of the larger temperature difference. The heat transfer to the cold surface is critical to determine the junction temperatures under a constant heat flux from the hot surface. The negative contribution from Peltier cooling and heating can be minimized when the current is smaller for longer elements. Therefore, a thicker TE module can generate more electric power even under a constant heat flux.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thermal Radiation and Cooling Technologies · Advanced Thermoelectric Materials and Devices · Thermal properties of materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. D.M. Rowe, Thermoelectrics and Its Energy Harvesting—Modules, Systems, and Applications in Thermoelectrics, Vol. 1 and 2 (London: CRC Press, 2012).10.1201/b11892 ↗
2. D.M. Rowe, J. Smith, G. Thomas, and G. Min, J. Electron. Mater. 40, 784 (2011).10.1007/s11664-011-1571-7 ↗
3. X. Gao, S.J. Andreasen, M. Chen, and S.K. Koer, Int. J. Hydrog. Energy 33, 7137 (2008).10.1016/j.ijhydene.2008.09.029 ↗
4. M. Chen, Y. Sasaki, and R.O. Suzuki, Mater. Trans. 52, 1549 (2011).10.2320/matertrans.E-M2011813 ↗
5. N. Wang, L. Han, H. He, N.H. Park, and K. Koumoto, Energy Environ. Sci. 4, 3676 (2011).10.1039/c1ee01646f ↗
6. R. Singh, S. Tundee, and A. Akbarzadeh, Sol. Energy 85, 371 (2011).10.1016/j.solener.2010.11.012 ↗
7. X. Ju, Z. Wang, G. Flamant, P. Li, and W. Zhao, Sol. Energy 86, 1941 (2012).10.1016/j.solener.2012.02.024 ↗
8. W.T. Xie, Y.J. Dai, R.Z. Wang, and K. Sumathy, Renew. Sustain. Energy Rev. 15, 2588 (2011).10.1016/j.rser.2011.03.031 ↗
9. Q.C. Murphree, Sol. Energy 70, 85 (2001).10.1016/S0038-092X(00)00138-9 ↗
10. R.O. Suzuki, A. Nakagawa, H.-T. Sui, and T. Fujisaka, J.␣Electron. Mater. 42, 1960 (2013).10.1007/s11664-013-2483-5 ↗
11. K. Ito, H. Sui, H. Hakozaki, H. Kinoshita, and R.O. Suzuki, J. Electron. Mater. 43, 2086–2093 (2014).10.1007/s11664-013-2965-5 ↗
12. T. Kyono, R.O. Suzuki, and K. Ono, IEEE Trans. Energy Convers. 18, 330 (2003).10.1109/TEC.2003.811721 ↗
13. R.O. Suzuki and D. Tanaka, J. Power Sources 122, 201 (2003).10.1016/S0378-7753(03)00396-3 ↗
14. T. Fujisaka and R.O. Suzuki, Proceeding IECON 2012—38th Annual Conference on IEEE Industrial Electronics Society, pp. 5868–5872, (2012).10.1109/IECON.2012.6389124 ↗
15. C.H. Cheng, S.Y. Huang, and T.C. Cheng, Int. J. Heat Mass Transf. 53, 2001 (2010).10.1016/j.ijheatmasstransfer.2009.12.056 ↗
16. M. Chen, L.A. Rosendahl, and T. Condra, Int. J. Heat Mass Transf. 54, 345 (2011).10.1016/j.ijheatmasstransfer.2010.08.024 ↗
17. M. Chen, S.J. Andreasen, L.A. Rosendahl, S.K. Kaer, and T.J. Condra, J. Electron. Mater. 39, 1593 (2010).10.1007/s11664-010-1270-9 ↗
18. J. Xiao, T. Yang, P. Li, P. Zhai, and Q. Zhang, Appl. Energy 93, 33 (2012).10.1016/j.apenergy.2011.06.006 ↗
19. X.R. Palacios, A. Arenas, R.R. Pecharromán, and F.L. Pagola, Appl. Therm. Eng. 29, 3501 (2009).10.1016/j.applthermaleng.2009.06.003 ↗
20. T. Fujisaka, H.-T. Sui, and R.O. Suzuki, J. Electron. Mater. 42, 1688 (2013).10.1007/s11664-012-2400-3 ↗