journal article·2008-03

Stress-Induced Grain Boundary Migration in Polycrystalline Copper

Max O. Bloomfield, Daniel N. Bentz, Timothy S. Cale

Journal of Electronic Materials· Volume 37· Issue 3
Publisher page

Abstract

We use three-dimensional (3D) grain-continuum models to study grain boundary migration, treating each grain with anisotropic elastic properties. Grain boundary speeds are computed using a finite element method to calculate differences in strain energy density across grain boundaries. Body-fitted finite element meshes are used. An interface tracking program, PLENTE, is used to develop starting structures and move the grain boundaries based on these speeds. We demonstrate this procedure on textured films consisting of 〈100〉 and 〈111〉 fiber textured film. We also apply the model to a short section of a Cu line embedded in oxide. We conclude with a discussion on the relative impact of different driving forces for grain boundary motion.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper Interconnects and Reliability · Metal and Thin Film Mechanics · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (81)

Show source-provided references
1. Yamaguchi K. (2001) J. Appl. Phys. 89:59010.1063/1.1319322 ↗
2. P. Walker, H. Mizuta, S. Uno, and Y. Furuta, 2003 IEEE International Conference on Simulation of Semiconductor Processes and Devices (Piscataway, NJ: IEEE, 2003), pp.␣207–210.10.1109/SISPAD.2003.1233673 ↗
3. G. Steinlesberger, M. Engelhardt, G. Schindler, W. Steinhogl, M. Traving, W. Honlein, and E. Bertagnolli, Materials, Technology and Reliability for Advanced Interconnects and Low-k Dielectrics (Warrendale, PA: Mater. Res. Soc., 2003), pp. 379–384.
4. S. Shojaei-Zadeh, S. Zhang, W. Liu, Y. Yang, S.M. Sadeghipour, M. Asheghi, and P. Sverdrup, The Ninth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, vol. 2 (Piscataway, NJ: IEEE, 2004), pp. 575–583.
5. E.O. Hall, Proceedings of the Physical Society. Section B, vol.␣64, p. 742, 1951.10.1088/0370-1301/64/9/302 ↗
6. Petch N.J. (1953) J. Iron Steel Inst. 174:25
7. Y. Xiang, X. Chen, and J.J. Vlassak, Thin Films: Stresses and Mechanical Properties IX (Warrendale, PA: Mater. Res. Soc., 2002), pp. 189–194.
8. Vanasupa L., Joo Y.-C., Besser P.R., Pramanick S. (1999) J. Appl. Phys. 85:258310.1063/1.369624 ↗
9. Ryu C., Kwon K.-W., Loke A.L.S., Lee H., Nogami T., Dubin V.M., Kavari R.A., Ray G.W., Wong S.S. (1999) IEEE Trans. Electron Dev. 46:111310.1109/16.766872 ↗
10. E.T. Ogawa, J.W. McPherson, J.A. Rosal, K.J. Dickerson, T.-C. Chiu, L.Y. Tsung, M.K. Jain, T.D. Bonifield, J.C. Ondrusek, and W.R. McKee, 2002 IEEE International Reliability Physics Symposium (Piscataway, NJ: IEEE, 2002), pp. 312–321.
11. Becker R. (2002) J. Comput.-Aided Mater. Des. 9:14510.1023/A:1026074619417 ↗
12. Cordill M.J., Muppidi T., Moody N.R., Bahr D.F. (2004) Microsyst. Technol. 10:45110.1007/s00542-004-0370-y ↗
13. Seah C.H., You G.Z., Wang S.R., Li C.Y., Kumar R. (2005) Microelectron. Eng. 81:6610.1016/j.mee.2005.03.040 ↗
14. The International Technology Roadmap for Semiconductors, 2005.
15. A.H. Fischer, A.v. Glasow, A. Huot, R.A. Schwarzer, Proceedings of the Advanced Metallization Conference 1999 (Warrendale, PA, USA: MRS, 2000), pp. 137–141
16. V.M. Dubin, C.D. Thomas, N. Baxter, C. Block, V. Chikarmane, P. McGregor, D. Jentz, K. Hong, S. Hearne, C. Zhi, D. Zierath, B. Miner, M. Kuhn, A. Budrevich, H. Simka, S. Shankar, Proceedings of the IEEE 2001 International Interconnect Technology Conference (Piscataway, NJ, USA: IEEE, 2001), pp. 271–273
17. Nix W.D., Mehl R.F. (1989) Metall. Trans. A (Phys. Metal. Mater. Sci.) 20A:221710.1007/BF02666659 ↗
18. Steinlesberger G., Engelhardt M., Schindler G., Steinhogl W., von Glasow A., Mosig K., Bertagnolli E. (2002) Microelectron. Eng. 64:40910.1016/S0167-9317(02)00815-8 ↗
19. Sorensen M.R., Mishin Y., Voter A.F. (2000) Phys. Rev. B 62:365810.1103/PhysRevB.62.3658 ↗
20. Schonfelder B., Gottstein G., Shvindlerman L.S. (2005) Acta Mater. 53:159710.1016/j.actamat.2004.12.010 ↗
21. Feng H.P., Cheng M.Y., Wang Y.L., Chang S.C., Wang Y.Y., Wan C.C. (2006) Thin Solid Films 498:5610.1016/j.tsf.2005.07.062 ↗
22. C.-K. Hu, J.M.E. Harper, Mater. Chem. Phys. 52(1), 5 (1998)10.1016/S0254-0584(98)80000-X ↗
23. M. West, R. McDonald, M. Anderson, S. Kingston, and R.␣Mui, Proc. 2003 International Conference on Characterization and Metrology for ULSI Technology (AIP, 2003), pp.␣504–513.
24. G. Steinlesberger, A.v. Glasow, M. Englehardt, G. Shindler, W. Honlein, M. Holz, E. Bertagnolli, Proceedings of the International Interconnect Technology Conference 2002 (Piscataway, NJ, USA: IEEE, 2002), pp. 265–267
25. M.E. Gross, R. Drese, C. Lingk, W.L. Brown, K. Evans-Lutterodt, D. Barr, D. Golovin, T. Ritzdorf, J. Turner, and L. Graham, Polycrystalline Metal and Magnetic Thin␣Films (Warrendale, PA: Mater. Res. Soc, 1999), pp.␣215–222.
26. M. Tada, M. Abe, N. Furutake, F. Ito, T. Tonegawa, M. Sekine, Y. Hayashi, IEEE Trans. Electron Dev. 54(8), 1867 (2007)10.1109/TED.2007.901265 ↗
27. Seah C.H., Mridha S., Chan L.H. (1999) J. Vac. Sci. Technol. B 17:2362
28. Ogawa E.T., Lee K.-D., Blaschke V.A., Ho P.S. (2002) IEEE Trans. Reliab. 51:40310.1109/TR.2002.804737 ↗
29. W.D. Nix and A.I. Sauter, First International Workshop on Stress-Induced Phenomena in Metallization, AIP Conference Proceedings, no 263, 1992, pp.␣89–10410.1063/1.42696 ↗
30. Okyar A.F., Gosz M. (2001) Finite Elem. Anal. Des. 37:96110.1016/S0168-874X(01)00077-4 ↗
31. T.C. Huang, C.H. Yao, W.K. Wan, C.C. Hsia, and M.S. Liang, IEEE International Interconnect Technology Conference (Piscataway, NJ: IEEE, 2003), pp. 207–209.
32. Rhee S.-H., Du Y., Ho P.S. (2003) J. Appl. Phys. 93:392610.1063/1.1560851 ↗
33. Paik J.-M., Park H., Joo Y.-C. (2004) Microelectron. Eng. 71:34810.1016/j.mee.2004.02.094 ↗
34. Zhang J., Bloomfield M.O., Lu J.-Q., Gutmann R.J., Cale T.S. (2005) Microelec. Eng. 82:53410.1016/j.mee.2005.07.053 ↗
35. Huang H., Gilmer G. (2002) Comp. Mat. Sci. 23:190–19610.1016/S0927-0256(01)00234-8 ↗
36. Cale T.S., Bloomfield M.O., Richards D.F., Jansen K.E., Gobbert M.K. (2002) Comp. Mater. Sci. 23:310.1016/S0927-0256(01)00216-6 ↗
37. M.O. Bloomfield, Y.H. Im, and T.S. Cale, Proc. 2003 SISPAD (Boston, MA, USA: IEEE, 2003), pp. 19–22.
38. Bloomfield M.O., Richards D.F., Cale T.S. (2003) Phil. Mag. 83:354910.1080/14786430310001599405 ↗
39. Bloomfield M.O., Cale T.S. (2004) Microelectron. Eng. 76:195–20410.1016/j.mee.2004.07.054 ↗
40. M.O. Bloomfield, T.S. Cale, Simulation of Semiconductor Processes and Devices 2004 (New York, NY, USA: Springer Verlag, 2004), pp. 232–236
41. Comsol Multiphysics 3.2, Comsol, Inc. http://www.comsol.com , 2005.
42. M.O. Bloomfield, D.F. Richards, and T.S. Cale, Lecture Notes Comp. Sci. 3516, 49 (2005).10.1007/11428862_7 ↗
43. Nygards M. (2003) Mech. Mat. 35:104910.1016/S0167-6636(02)00325-3 ↗
44. Courtney T.H. (1990) Mechanical Behavior of Materials. McGraw-Hill Pub Co, New York
45. Lekhnitskii S.G. (1981) Theory of Elasticity of an Anisotropic Body. Mir Publishers, Moscow
46. Simmons G., Wang H. (1971) Single Crystal Elastic Constants and Calculated Aggregate Properties: A Handbook. M.I.T Press, Cambridge, MA
47. Y. Akiniwa, S. Machiya, K. Serizawa, and K. Tanaka, Proceedings of the 2004 International Symposium on Micro-Nano Mechatronics and Human Science (Nagoya, Japan: IEEE, 2004), pp. 75–80.
48. Baker S.P., Kretschmann A., Arzt E. (2001) Acta Mat. 49:214510.1016/S1359-6454(01)00127-6 ↗
49. Gudmundson P., Wikstrom A. (2002) Microelectron. Eng. 60:1710.1016/S0167-9317(01)00577-9 ↗
50. A.F. Bower, in Lecture notes: EN175: Advanced Mechanics of Solids, Brown University, http://www.engin.brown.edu/courses/en175 , 2005.
51. Arfken G. (1985) Mathematical Methods for Physicists, 3rd ed. Academic Press Inc, San Diego CA
52. S. Wolf, Microchip Manufacturing (Lattice Press, 2003).
53. Thouless M.D., Gupta J., Harper J.M.E. (1993) J. Mater. Res. 8:184510.1557/JMR.1993.1845 ↗
54. Hosford W.F. (2005) Mechanical Behavior of Materials. Cambridge University Press, New York10.1017/CBO9780511810930 ↗
55. Bunge H.-J. (1982) Texture Analysis in Materials Science. Butterworths, London
56. Thompson C.V. (2000) Ann. Rev. Mater. Sci. 30:159–19010.1146/annurev.matsci.30.1.159 ↗
57. Porter D.A., Easterling K.E. (1992) Phase Transformations in Metals and Alloys, 2nd ed. CRC Press, Boca Raton FL USA10.1007/978-1-4899-3051-4 ↗
58. D. Turnbull, Trans. Am. Inst. Mining Eng. 191, 661 (1951)
59. Gottstein G., Shvindlerman L.S. (1999) Grain Boundary Migration in Metals. CRC Press, Boca Raton, FL
60. Frost H.J., Thompson C.V., Walton D.T. (1992) Acta Metall. Mater 40:779–79310.1016/0956-7151(92)90020-F ↗
61. Sanchez J.E., Arzt E. (1992) Scripta Metall. Mater. 27:28510.1016/0956-716X(92)90513-E ↗
62. Carel R., Thompson C.V., Frost H.J. (1996) Acta Mater. 44:247910.1016/1359-6454(95)00365-7 ↗
63. Zielinski E.M., Vinci R.P., Bravman J.C. (1994) J. Appl. Phys. 76:451610.1063/1.357283 ↗
64. Park N.-J., Field D.P., Nowell M.M., Besser P.R. (2005) J. Electronic Mater. 34:150010.1007/s11664-005-0157-7 ↗
65. Park N., Field D.P., Nowell M.M. (2004) JOM 56:47
66. Rollett A.D. (2004) JOM 56:6310.1007/s11837-004-0075-9 ↗
67. Taheri M.L., Molodov D., Gottstein G., Rollett A.D. (2005) Grain boundary mobility under a stored-energy driving force: A comparison to curvature-driven boundary migration. Zeitschrift fuer Metallkunde/Mater. Res. Adv. Techn. 96:1166–1170
68. Weast R.C. (1983) CRC Handbook of Chemistry and Physics, 63 ed. CRC Press Inc., Boca Raton, FL
69. M. Upmanyu, R.W. Smith, and D.J. Srolovitz, Interface Sci. 6, 41 (1998).10.1023/A:1008608418845 ↗
70. Zielinski E.M., Vinci R.P., Bravman J.C. (1995) Appl. Phys. Lett. 67:1078–8010.1063/1.114455 ↗
71. McLean M., Gale B. (1969) Philos. Mag. 20:103310.1080/14786436908228071 ↗
72. Israelachvili J. (1991) Intermolecular and Surface Forces. Academic Press, London
73. Cho J.-Y., Mirpuri K., Lee D.N., An J.-K., Szpunar J.A. (2005) J. Electronic Mater. 34:5310.1007/s11664-005-0180-8 ↗
74. H.M. Mourad, K. Garikipati, Comput. Methods Appl. Mech. Eng. 196(1–3), 595 (2006)10.1016/j.cma.2006.06.005 ↗
75. Grychanyuk V., Tsukrov I., Gross T. (2004) Int. J. Fracture 127:14910.1023/B:FRAC.0000035089.16019.12 ↗
76. Kirchheim R. (1992) Acta Met. Mat. 40:30910.1016/0956-7151(92)90305-X ↗
77. Wilkening J., Borucki L., Sethian J.A. (2003) SIAM J. Appl. Math. 64:1839
78. Wilkening J., Borucki L., Sethian J.A. (2003) SIAM J. Appl. Math. 64:1864
79. Sarychev M.E., Zhitnikov Y.V., Borucki L., Liu C.-L., Makhviladze T.M. (1999) J. Appl. Phys. 86:306810.1063/1.371169 ↗
80. Frost H.J., Ashby M.F. (1982) Deformation-Mechanism Maps. Pergamon Press, Oxford UK
81. Ungar T., Schafler E., Hanak P., Bernstorff S., Zehetbauer M. (2005) Zeitschrift fur Metallkunde 96:57810.3139/146.101073 ↗