Effects of Y Doping on Dielectric and Varistor Properties of CaCu3Ti4O12 Thin Films
Source abstract
Abstract
Ca1−3x/2YxCu3Ti4O12 (x = 0, 0.05, 0.1, 0.15, and 0.2) (CCTO) thin films were prepared by a modified sol–gel method. The effects of Y doping on the microstructure and electrical properties of the CCTO thin films were investigated. According to x-ray diffraction analysis, the main phase of all Y-doped CCTO thin films is cubic Im $$ \bar{3} $$ . Meanwhile, some secondary phases were defected. Scanning electron microscopy analysis showed that Y doping can easily lead to a smaller grain size and larger porosity in CCTO thin films. Room-temperature dielectric analysis showed that the dielectric constant of different Y doping samples at 1 kHz was 4213, 4523, 4974, 4824, and 4777, and the dielectric losses were 0.053, 0.051, 0.062, 0.067, and 0.049, respectively. The study of Y-doped CCTO thin films showed that Y doping increased the dielectric constant of the films at low frequencies, but at the same time it increased their dielectric loss and decreased their dielectric frequency and temperature stability range. Y-doping had little effect on the nonlinearity of the films and did not significantly change their nonlinear coefficients.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dielectric properties of ceramics · Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. M. Subramanian, D. Li, N. Duan, B. Reisner, and A. Sleight, J. Solid State Chem. 151, 323 (2000).10.1006/jssc.2000.8703 ↗
2. A. Ramirez, M. Subramanian, M. Gardel, G. Blumberg, D. Li, T. Vogt, and S. Shapiro, Solid State Commun. 115, 217 (2000).10.1016/S0038-1098(00)00182-4 ↗
3. S.Y. Chung, I.D. Kim, and S.J.L. Kang, Nat. Mater. 3, 774 (2004).10.1038/nmat1238 ↗
4. D. Xu, X. Cheng, G. Zhao, J. Yang, and L. Shi, Ceram. Int. 37, 701 (2011).10.1016/j.ceramint.2010.09.032 ↗
5. J. Cai, Y.H. Lin, M. Li, C.W. Nan, J. He, and F. Yuan, J. Am. Ceram. Soc. 90, 291 (2007).10.1111/j.1551-2916.2006.01338.x ↗
6. R. Schmidt, M.C. Stennett, N.C. Hyatt, J. Pokorny, J. Prado-Gonjal, M. Li, and D.C. Sinclair, J. Eur. Ceram. Soc. 32, 3313 (2012).10.1016/j.jeurceramsoc.2012.03.040 ↗
7. L. Liu, H. Fan, P. Fang, and X. Chen, Mater. Res. Bull. 43, 1800 (2008).10.1016/j.materresbull.2007.07.012 ↗
8. M. Xiao, L. Li, and P. Zhang, J. Alloys Compd. 743, 570 (2018).10.1016/j.jallcom.2018.01.202 ↗
9. G. Riquet, S. Marinel, Y. Bréard, and C. Harnois, Ceram. Int. 45, 9185 (2019).10.1016/j.ceramint.2019.01.261 ↗
10. J. Zhao, H. Zhao, and Z. Zhu, Mater. Res. Bull. 113, 97 (2019).10.1016/j.materresbull.2019.01.014 ↗
11. D. Xu, X. Yue, Y. Zhang, J. Song, X. Chen, S. Zhong, J. Ma, L. Ba, L. Zhang, and S. Du, J. Alloys Compd. 773, 853 (2019).10.1016/j.jallcom.2018.09.340 ↗
12. D. Xu, X. Yue, J. Song, S. Zhong, J. Ma, L. Bao, L. Zhang, and S. Du, Ceram. Int. 45, 11421 (2019).10.1016/j.ceramint.2019.03.008 ↗
13. R. Löhnert, H. Bartsch, R. Schmidt, and B. Capraro, J. Am. Ceram. Soc. 98, 141 (2015).10.1111/jace.13260 ↗
14. M. Mohammadi, P. Alizadeh, and F. Clemens, J. Alloys Compd. 688, 270 (2016).10.1016/j.jallcom.2016.06.245 ↗
15. F. Luo, J. He, J. Hu, and Y.H. Lin, J. Am. Ceram. Soc. 93, 3043 (2010).10.1111/j.1551-2916.2010.04022.x ↗
16. P. Thongbai, T. Yamwong, S. Maensiri, V. Amornkitbamrung, P. Chindaprasirt, and J. Am, Ceram. Soc. 97, 1785 (2014).10.1111/jace.12812 ↗
17. J. Boonlakhorn, P. Kidkhunthod, B. Putasaeng, T. Yamwong, P. Thongbai, and S. Maensiri, J. Mater. Sci. Mater. Electron. 26, 2329 (2015).10.1007/s10854-015-2688-x ↗
18. R. Yu, H. Xue, Z. Cao, L. Chen, and Z. Xiong, J. Eur. Ceram. Soc. 32, 1245 (2012).10.1016/j.jeurceramsoc.2011.11.039 ↗
19. J. Boonlakhorn and P. Thongbai, Ceram. Int. 43, 12736 (2017).10.1016/j.ceramint.2017.06.159 ↗
20. S. Jin, H. Xia, and Y. Zhang, Ceram. Int. 35, 309 (2009).10.1016/j.ceramint.2007.10.007 ↗
21. R. Kashyap, O. Thakur, and R. Tandon, Ceram. Int. 38, 3029 (2012).10.1016/j.ceramint.2011.11.085 ↗
22. Y. Wang, L. Ni, and X.M. Chen, J. Mater. Sci. Mater. Electron. 22, 345 (2011).10.1007/s10854-010-0140-9 ↗
23. K. He, Y. Luo, R. Yu, J. Qi, X. Sun, Y. Yang, H. Xu, J. Ma, and D. Xu, Mater. Res. Bull. 69, 98 (2015).10.1016/j.materresbull.2014.11.054 ↗
24. L. Tang, F. Xue, P. Guo, Z. Xin, Z. Luo, and W. Li, Ceram. Int. 44, 18535 (2018).10.1016/j.ceramint.2018.07.075 ↗
25. M. Xiao and Q. Hu, J. Alloys Compd. 652, 70 (2015).10.1016/j.jallcom.2015.08.188 ↗
26. D. Xu, Y. Tong, T. Yan, and L. Shi, ACS Sustain. Chem. Eng. 5, 5810 (2017).10.1021/acssuschemeng.7b00551 ↗
27. D. Xu, L. Shi, Z. Wu, Q. Zhong, and X. Wu, J. Eur. Ceram. Soc. 29, 1789 (2009).10.1016/j.jeurceramsoc.2008.10.020 ↗
28. D. Xu, C. Zhang, Y. Lin, L. Jiao, H. Yuan, and G. Zhao, J. Alloys Compd. 522, 157 (2012).10.1016/j.jallcom.2012.01.128 ↗
29. J. Wang, Z. Lu, T. Deng, C. Zhong, and Z. Chen, J. Eur. Ceram. Soc. 38, 3505 (2018).10.1016/j.jeurceramsoc.2018.04.015 ↗
30. Z. Kafi, A. Kompany, H. Arabi, and A.K. Zak, J. Alloys Compd. 727, 168 (2017).10.1016/j.jallcom.2017.07.236 ↗
31. Z. Liu, X. Chao, P. Liang, Z. Yang, and L. Zhi, J. Am. Ceram. Soc. 97, 2154 (2014).10.1111/jace.12940 ↗
32. B. Cheng, Y.H. Lin, J. Yuan, J. Cai, C.W. Nan, X. Xiao, and J. He, J. Appl. Phys. 106, 034111 (2009).10.1063/1.3194311 ↗
33. L. Ni and X.M. Chen, J. Am. Ceram. Soc. 93, 184 (2010).10.1111/j.1551-2916.2009.03384.x ↗
34. D. Xu, Y. Zhu, B. Zhang, X. Yue, L. Jiao, J. Song, S. Zhong, J. Ma, L. Bao, and L. Zhang, J. Mater. Sci. Mater. El. 29, 5116 (2018).10.1007/s10854-017-8475-0 ↗
35. Y.Z. Mei, S. Pandey, W.M. Long, J. Liu, L. Zhang, S.M. Du, and D. Xu, J. Eur. Ceram. Soc. 40, 1330 (2020).10.1016/j.jeurceramsoc.2019.11.013 ↗
36. J.D. Breeze, J.M. Perkins, D.W. McComb, and N.M. Alford, J. Am. Ceram. Soc. 92, 671 (2009).10.1111/j.1551-2916.2009.02932.x ↗