journal article·2019-10

Investigating the Effect of Ag Content on Mechanical Properties of Sn-Ag-Cu Micro-BGA Joints

Hao Chen, Tzu-Ting Chou, Collin Fleshman, Jenq-Gong Duh

Journal of Electronic Materials· Volume 48· Issue 10
Publisher page

Abstract

In order to evaluate the effect of Ag content on the mechanical property in micro-ball grid array (micro-BGA) solder joints, a shear test was carried out on Sn-3.0Ag-0.5Cu/Cu (wt.%) and Sn-4.0Ag-0.5Cu/Cu solder joints with a diameter of 90 μm. Corresponding microstructure before and after the shear test were investigated in this study. The shear test results demonstrated that the shear strength of Sn-4.0Ag-0.5Cu/Cu was greater than that of Sn-3.0Ag-0.5Cu/Cu. In Sn-4.0Ag-0.5Cu/Cu. The number of fine eutectic Ag3Sn particles in the solder matrix was higher, and the occurrence of plate-like Ag3Sn formation was much more frequent than in Sn-3.0Ag-0.5Cu/Cu. Moreover, by applying a fallback mode shear test and observing the fracture surface, broken plate-like Ag3Sn was found in the Sn-4.0Ag-0.5Cu/Cu joints with higher shear strength. These plate-like Ag3Sn acted as obstacles against shear force and enhanced the shear strength of joints. Therefore, both fine Ag3Sn precipitates and huge plate-like Ag3Sn improved the shear performance of micro-BGA joints. In addition, the shear behavior of 250 μm solder joints was also investigated and discussed, which was not identical to micro-BGA joints. The strengthening effect of plate-like Ag3Sn only occurred in micro-BGA joints, which had higher volume ratio of plate-like Ag3Sn in solder joints.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. J.J. Sundelin, S.T. Nurmi, T.K. Lepistö, and E.O. Ristolainen, Mater. Sci. Eng., A 420, 55 (2006).10.1016/j.msea.2006.01.065 ↗
2. M. Abtew and G. Selvaduray, Mater. Sci. Eng. R. Rep. 27, 95 (2000).10.1016/S0927-796X(00)00010-3 ↗
3. K. Zeng and K.-N. Tu, Mater. Sci. Eng. R. Rep. 38, 55 (2002).10.1016/S0927-796X(02)00007-4 ↗
4. K.S. Kim, S.H. Huh, and K. Suganuma, J. Alloys Compd. 352, 226 (2003).10.1016/S0925-8388(02)01166-0 ↗
5. Y. Tian, C. Hang, C. Wang, S. Yang, and P. Lin, Mater. Sci. Eng., A 529, 468 (2011).10.1016/j.msea.2011.09.063 ↗
6. C. Fleshman, W.-Y. Chen, T.-T. Chou, J.-H. Huang, and J.-G. Duh, Mater. Chem. Phys. 189, 76 (2017).10.1016/j.matchemphys.2016.12.013 ↗
7. R. Pandher, T. Lawlor, in Proceedings of the International Conference on Soldering and Reliabilty (2009), pp. 1–14
8. J.-H. Lee, Met. Mater. Int. 14, 649 (2008).10.3365/met.mat.2008.10.649 ↗
9. S. Terashima, Y. Kariya, T. Hosoi, and M. Tanaka, J. Electron. Mater. 32, 1527 (2003).10.1007/s11664-003-0125-z ↗
10. M. Genanu, F. Mutuku, E.J. Cotts, J. Wilcox, B. Arfaei, E. Perfecto, in IEEE Electronic Components and Technology Conference (ECTC) (2017), pp. 423–428
11. S.K. Kang, D.-Y. Shih, N. Donald, W. Henderson, T. Gosselin, A. Sarkhel, N. Charles Goldsmith, K.J. Puttlitz, and W.K. Choi, JOM 55, 61–65 (2003).10.1007/s11837-003-0143-6 ↗
12. J. Shen, Y.C. Liu, H.X. Gao, C. Wei, and Y.Q. Yang, J. Electron. Mater. 34, 1591 (2005).10.1007/s11664-005-0170-x ↗
13. D.R. Frear, J.W. Jang, J.K. Lin, and C. Zhang, JOM 53, 28 (2001).10.1007/s11837-001-0099-3 ↗
14. M. Wang, J. Wang, H. Feng, and W. Ke, Mater. Sci. Eng., A 558, 649 (2012).10.1016/j.msea.2012.08.069 ↗
15. I. Anderson, J. Walleser, and J. Harringa, JOM 59, 38 (2007).10.1007/s11837-007-0087-3 ↗
16. W.-Y. Chen, T.-T. Chou, W. Tu, H.-C. Chang, C.J. Lee, and J.-G. Duh, J. Mater. Sci.: Mater. Electron. 26, 2357 (2015).
17. J.-Y. Park, Y.M. Kim, and Y.-H. Kim, J. Mater. Sci.: Mater. Electron. 26, 5852 (2015).
18. K.-W. Moon and W. Boettinger, JOM 56, 1122 (2004).10.1007/s11837-004-0068-8 ↗
19. R. Chromik, R. Vinci, S. Allen, and M. Notis, JOM 55, 66 (2003).10.1007/s11837-003-0144-5 ↗
20. G. Ghosh, J. Mater. Res. 19, 1439 (2004).10.1557/JMR.2004.0193 ↗