journal article·2018-02

Elevated-Temperature Mechanical Properties of Lead-Free Sn-0.7Cu-xSiC Nanocomposite Solders

A. Mohammadi, R. Mahmudi

Journal of Electronic Materials· Volume 47· Issue 2
Publisher page

Abstract

Mechanical properties of Sn-0.7 wt.%Cu lead-free solder alloy reinforced with 0 vol.%, 1 vol.%, 2 vol.%, and 3 vol.% 100-nm SiC particles have been assessed using the shear punch testing technique in the temperature range from 25°C to 125°C. The composite materials were fabricated by the powder metallurgy route by blending, compacting, sintering, and finally extrusion. The 2 vol.% SiC-containing composite showed superior mechanical properties. In all conditions, the shear strength was adversely affected by increasing test temperature, and the 2 vol.% SiC-containing composite showed superior mechanical properties. Depending on the test temperature, the shear yield stress and ultimate shear strength increased, respectively, by 3 MPa to 4 MPa and 4 MPa to 5.5 MPa, in the composite materials. The strength enhancement was mostly attributed to the Orowan particle strengthening mechanism due to the SiC nanoparticles, and to a lesser extent to the coefficient of thermal expansion mismatch between the particles and matrix in the composite solder. A modified shear lag model was used to predict the total strengthening achieved by particle addition, based on the contribution of each of the above mechanisms.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloys Composites Properties · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. M. Abtew and G. Selvaduray, Mater. Sci. Eng. R27, 95 (2000).10.1016/S0927-796X(00)00010-3 ↗
2. R. Mahmudi, A.R. Geranmayeh, H. Noori, N. Jahangiri, and H. Khanbareh, Mater. Sci. Eng. A 487, 20 (2008).10.1016/j.msea.2007.09.050 ↗
3. F. Guo, J. Mater. Sci. Mater. Electron. 18, 129 (2007).10.1007/s10854-006-9019-1 ↗
4. N. Wade, K. Wu, J. Kunii, S. Yamada, and K. Miyahara, J. Electron. Mater. 30, 1228 (2001).10.1007/s11664-001-0154-4 ↗
5. R. Mahmudi, A.R. Geranmayeh, H. Noori, G. Nayyeri, and F. Pishbin, Mater. Sci. Technol. 24, 803 (2008).10.1179/174328408X307274 ↗
6. G. Zeng, S. Xue, L. Zhang, and L. Gao, J. Mater. Sci. Mater. Electron. 22, 565 (2011).10.1007/s10854-011-0291-3 ↗
7. J. Shen and Y.C. Chan, Microelectron. Reliab. 49, 223 (2008).10.1016/j.microrel.2008.10.004 ↗
8. D.C. Lin, G.X. Wang, T.S. Srivatsan, M. Al-Hajri, and M. Petraroli, Mater. Lett. 53, 333 (2002).10.1016/S0167-577X(01)00503-1 ↗
9. D.A.A. Shnawah, S.B.M. Said, M.F.B.M. Sabri, and I.A. Badruddin, Solder Surf. Mount. Technol. 24, 257 (2012).10.1108/09540911211262548 ↗
10. I. Shafiq, Y.C. Chan, N.B. Wong, and W.K.C. Yung, J. Mater. Sci. Mater. Electron. 23, 1427 (2012).10.1007/s10854-011-0608-2 ↗
11. X. Zhong and M. Gupta, Adv. Eng. Mater. 7, 1049 (2005).10.1002/adem.200500109 ↗
12. A.R. Geranmayeh, R. Mahmudi, and M. Kangooie, Mater. Sci. Eng. A 528, 3967 (2011).10.1016/j.msea.2011.02.034 ↗
13. P. Babaghorbani, S.M.L. Nai, and M. Gupta, J. Mater. Sci. Mater. Electron. 20, 571 (2009).10.1007/s10854-008-9767-1 ↗
14. D.C. Lin, G.X. Wang, T.C. Srivatsan, M. Al-Hajri, and M. Petraroli, Mater. Lett. 57, 3193 (2003).10.1016/S0167-577X(03)00023-5 ↗
15. J. Shen, Y.C. Liu, Y.J. Han, Y.M. Tian, and H.X. Gao, J. Electron. Mater. 35, 1672 (2006).10.1007/s11664-006-0216-8 ↗
16. K.M. Kumar, V. Kripesh, and A.A.O. Tay, J. Alloys Compd. 450, 229 (2008).10.1016/j.jallcom.2006.10.123 ↗
17. S.M.L. Nai, J. Wei, and M. Gupta, J. Electron. Mater. 37, 515 (2008).10.1007/s11664-008-0379-6 ↗
18. P. Liu, P. Yao, and J. Liu, J. Electron. Mater. 37, 874 (2008).10.1007/s11664-007-0366-3 ↗
19. A.A. El-Daly, W.M. Desoky, T.A. Elmosalami, M.G. El-Shaarawy, and A.M. Abdraboh, Mater. Des. 65, 1196 (2015).10.1016/j.matdes.2014.08.058 ↗
20. A.A. El-Daly, A. Fawzy, S.F. Mansour, and M.J. Younis, Mater. Sci. Eng. A 578, 62 (2013).10.1016/j.msea.2013.04.022 ↗
21. R.K. Guduru, K.A. Darling, R. Kishore, R.O. Scattergood, C.C. Koch, and K.L. Murty, Mater. Sci. Eng. A 395, 307 (2005).10.1016/j.msea.2004.12.048 ↗
22. S.M. Masoudpanah, R. Mahmudi, and T.G. Langdon, Kovove Mater. 49, 43 (2011).10.4149/km_2011_1_43 ↗
23. F. Akbaripanah, F. Fereshteh-Saniee, R. Mahmudi, and H.K. Kim, Mater. Des. 43, 31 (2013).10.1016/j.matdes.2012.06.051 ↗
24. R. Alizadeh and R. Mahmudi, Mater. Sci. Eng. A 527, 3975 (2010).10.1016/j.msea.2010.03.007 ↗
25. A.A. Ibrahiem, E.H. El-Khawas, and A.A. El-Daly, J. Mater. Sci. Mater. Electron. 28, 1060 (2017).10.1007/s10854-016-5629-4 ↗
26. R. Mahmudi and M. Sadeghi, J. Mater. Eng. Perform. 22, 433 (2013).10.1007/s11665-012-0256-6 ↗
27. M.F. Ashby, in Proceedings of the Second Bolton Landing Conference on Oxide Dispersion Strengthening (1968) pp. 143–205.
28. M. Habibnejad-Korayem, R. Mahmudi, and W.J. Poole, Mater. Sci. Eng. A 519, 198 (2009).10.1016/j.msea.2009.05.001 ↗
29. L. Rotherham, A.D.N. Smith, and G.B. Greenough, J. Inst. Metals Lond. 79, 439 (1951).