Experimental Study on Heat Insulation Performance of Ceramic Additives Paint (CAP) in an Indoor Closed Media
Source abstract
Abstract
The objective of this research is to study the heat insulation performance of ceramic additives paint (CAP) with the variation of electric power. The thickness of the closed media was 13 cm and the internal dimensions were 1m × 1m × 1m. The two closed media were painted by the regular paint and the ceramic content of insulation layer was 18%. The temperature of internal closed media was controlled by thermostats to be in two levels, namely 28 °C and 40 °C. The results indicated that a considerable electric energy gain can be achieved by CAP in comparison with the regular paint. Additionally, it was observed that in indoor closed media with ceramic additive paint, the internal temperature reached 40 °C and 28 °C in a sufficient short period of time. In this paper, adaptive neuro-fuzzy inference system (ANFIS) is used to predict the energy consumption and closed media temperature. The ANFIS model has been applied for the training of the fuzzy system and the test set was used to evaluate the performance of the system using statistical parameters, which were R2 > 0.95, MAE < 0.96, MSE < 1.53, RMSE < 1.28, and MAPE < 0.98. The results approved that the predicted values from the model were in a good agreement with the experimental data.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Building Energy and Comfort Optimization · Phase Change Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Bynum R (2000) Insulation handbook. McGraw Hill Professional
2. Zhang C, Zhou C, Peng H, Gong S, Xu H (2007) Influence of thermal shock on insulation effect of nano-multilayer thermal barrier coatings. Surf Coatings Technol 201(14):6340–634410.1016/j.surfcoat.2006.11.042 ↗
3. Portinha A, Teixeira V, Carneiro J, Martins J, Costa M, Vassen R, Stoever D (2005) Characterization of thermal barrier coatings with a gradient in porosity. Surf Coatings Technol 195(2):245– 25110.1016/j.surfcoat.2004.07.094 ↗
4. Teixeira V, Andritschky M, Fischer W, Buchkremer H, Stöver D (1999) Effects of deposition temperature and thermal cycling on residual stress state in zirconia-based thermal barrier coatings. Surf Coatings Technol 120:103–11110.1016/S0257-8972(99)00341-2 ↗
5. DeMasi-Marcin JT, Gupta DK (1994) Protective coatings in the gas turbine engine. Surf Coatings Technol 68:1–910.1016/0257-8972(94)90129-5 ↗
6. Johner G, Schweitzer K (1985) Flame rig testing of thermal barrier coatings and correlation with engine results. J Vacuum Sci Technol A 3(6):2516–252410.1116/1.572826 ↗
7. Nicholls J, Deakin M, Rickerby D (1999) A comparison between the erosion behaviour of thermal spray and electron beam physical vapour deposition thermal barrier coatings. Wear 233:352–36110.1016/S0043-1648(99)00214-8 ↗
8. Meier SM, Gupta DK, Sheffler KD (1991) Ceramic thermal barrier coatings for commercial gas turbine engines. JOM 43(3):50–5310.1007/BF03220164 ↗
9. Miller RA (1987) Current status of thermal barrier coatings—an overview. Surf Coatings Technol 30(1):1–1110.1016/0257-8972(87)90003-X ↗
10. Movchan B (1996) EB-PVD technology in the gas turbine industry: present and future. JOM 48(11):40–4510.1007/BF03223243 ↗
11. Thornton JA (1975) Influence of substrate temperature and deposition rate on structure of thick sputtered Cu coatings. J Vacuum Sci Technol 12(4):830–83510.1116/1.568682 ↗
12. Schulz U, Fritscher K, Rätzer-Scheibe H-J, Kaysser WA, Peters M (1997) Thermocyclic behaviour of microstructurally modified EB-PVD thermal barrier coatings. In: Materials science forum. Trans Tech Publ, pp 957–96410.4028/www.scientific.net/MSF.251-254.957 ↗
13. Oda T, Nakai T, Toba K, Jianbo H (2015) Measurement of amenity in buildings interiors coated with ceramic insulating paint. Procedia Manufac 3:1728–173310.1016/j.promfg.2015.07.488 ↗
14. Yuan Y, Li Z (2017) A novel approach of in-situ synthesis of WC particulate-reinforced Fe-30Ni ceramic metal coating. Surf Coatings Technol 328:256–26510.1016/j.surfcoat.2017.08.050 ↗
15. Bozsaky D (2017) Thermodynamic tests with nano-ceramic thermal insulation coatings. Pollack Periodica 12 (1):135–14510.1556/606.2017.12.1.11 ↗
16. Esfandyari M, Amiri M, Salooki MK (2015) Neural network prediction of the Fischer-Tropsch synthesis of natural gas with Co (III)/Al2O3 catalyst. Chem Eng Res Bull 17(1):25–3310.3329/cerb.v17i1.22915 ↗
17. Esfandyari M, Fanaei MA, Gheshlaghi R, Mahdavi MA (2016) Neural network and neuro-fuzzy modeling to investigate the power density and Columbic efficiency of microbial fuel cell. J Taiwan Inst Chem Eng 58:84–9110.1016/j.jtice.2015.06.005 ↗
18. Inan G, Göktepe A, Ramyar K, Sezer A (2007) Prediction of sulfate expansion of PC mortar using adaptive neuro-fuzzy methodology. Build Environ 42(3):1264–126910.1016/j.buildenv.2005.11.029 ↗
19. Wang Y-M, Elhag TM (2008) An adaptive neuro-fuzzy inference system for bridge risk assessment. Expert Syst Appl 34(4):3099–310610.1016/j.eswa.2007.06.026 ↗
20. Takassi MA, Kharaji AG, Esfandyari M, Salooki MK (2013) Neuro-fuzzy prediction of alumina-supported cobalt vanadate catalyst behavior in the Fischer-Tropsch process. Eur J Chem 4(2):110–11610.5155/eurjchem.4.2.110-116.736 ↗
21. Takassi M, Gharibi Kharaji A, Esfandyari M, Koolivand-salooki M (2013) Neuro-fuzzy prediction of Fe-V2O5-promoted γ-alumina catalyst behavior in the reverse water–gas–shift reaction. Energy Technol 1(2-3):144–15010.1002/ente.201200012 ↗
22. Salehi H, Zeinali-Heris S, Esfandyari M, Koolivand M (2013) Nero-fuzzy modeling of the convection heat transfer coefficient for the nanofluid. Heat Mass Transfer 49(4):575–58310.1007/s00231-012-1104-9 ↗
23. Rahmanian B, Pakizeh M, Mansoori SAA, Esfandyari M, Jafari D, Maddah H, Maskooki A (2012) Prediction of MEUF process performance using artificial neural networks and ANFIS approaches. J. Taiwan Inst Chem Eng 43(4):558–56510.1016/j.jtice.2012.01.002 ↗
24. Meharrar A, Tioursi M, Hatti M, Stambouli AB (2011) A variable speed wind generator maximum power tracking based on adaptative neuro-fuzzy inference system. Expert Syst Appl 38(6):7659–766410.1016/j.eswa.2010.12.163 ↗