Mechanical, Dielectric and Thermal Stability of Silicon Oxynitride Nanoparticle Dispersed Tamarind Fiber-Reinforced Epoxy Bio-composite
Source abstract
Abstract
The importance of Si2N2O nanoparticle and tamarind fiber integration into a liquid diglycidyl-ether of bisphenol-A (LY556) based epoxy resin composite was investigated in this research. The primary objective of this study was to evaluate the mechanical, dielectrical and thermal properties of Si2N2O nanoparticle dispersed tamarind fiber-reinforced epoxy composite. The bio-composite laminates were prepared using hand lay-up method and examined in accordance with ASTM standards. The incorporation of Si2N2O nanoparticles enhances the tensile strength, flexural strength, and Izod impact strength, which seem to be 132 MPa, 172 MPa, and 5.74 J for composite designation `N3`, respectively. However, the `N4` composite has the maximum hardness value of up to 92 Shore-D. In comparison to all other composite designations, ‘N4’ exhibits the highest dielectric loss and constant values of 0.94 and 6.2, respectively, as well as the highest reported Tg values of 550 °C. These mechanically strong, dielectrically and thermally stable composites could be utilised in a variety of industrial sectors, automotive parts, sports, and household applications.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Tribology and Wear Analysis · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Prakash VA, Viswanthan R (2019) Fabrication and characterization of echinoidea spike particles and kenaf natural fibre-reinforced Azadirachta-Indica blended epoxy multi-hybrid bio composite. Composites part A: applied science and manufacturing, 118, pp.317–32610.1016/j.compositesa.2019.01.008 ↗
2. Alshahrani H, Prakash VA (2023) Development of highly flexible electromagnetic interference shielding composites for electronic applications using Cobalt/Hevea brasiliensis seed husk carbon dots/Bamboo microfibre-polyvinyl alcohol. Industrial Crops and Products, 191, p. 11596710.1016/j.indcrop.2022.115967 ↗
3. Amin, Muhammad Nasir et al. (2022) Materials (Basel, Switzerland) vol. 15,10 3431. 10 May. 2022, https://doi.org/10.3390/ma1510343110.3390/ma15103431 ↗
4. Alshahrani H, Prakash VA (2022) Mechanical, fatigue and DMA behaviour of high content cellulosic corn husk fibre and orange peel biochar epoxy biocomposite: a greener material for cleaner production. J Clean Prod 374:13393110.1016/j.jclepro.2022.133931 ↗
5. Alshahrani, Hassan, VR Arun Prakash (2022) Progress in organic coatings 172 : 10708010.1016/j.porgcoat.2022.107080 ↗
6. Joshua O et al. Composite Interfaces, 28:9, 925–960, https://doi.org/10.1080/09276440.2020.182627410.1080/09276440.2020.1826274 ↗
7. Maheswari et al (2013) Int J Polym Anal Charact 18:520–533. https://doi.org/10.1080/1023666X.2013.81607310.1080/1023666X.2013.816073 ↗
8. Chimsah et al. Academic Journals (2020) 14–9.http://hdl.handle.net/123456789/3006
9. Baig et al (2021) Materials Today: Proceedings 45:257–263. https://doi.org/10.1016/j.matpr.2020.10.43310.1016/j.matpr.2020.10.433 ↗
10. Wu Shoujun et al (2013) Int J Refract Metals Hard Mater 36:97–100. https://doi.org/10.1016/j.ijrmhm.2012.07.00710.1016/j.ijrmhm.2012.07.007 ↗
11. Wang Yingxia et al (2020) Ceram J Int 467:8725–8729. https://doi.org/10.1016/j.ceramint.2019.12.11110.1016/j.ceramint.2019.12.111 ↗
12. Jin Xing et al (2020) J Hazard Mater 400:123145. https://doi.org/10.1016/j.jhazmat.2020.12314510.1016/j.jhazmat.2020.123145 ↗
13. Parrillo ety al (2021) SN Appl Sci 3:268. https://doi.org/10.1007/s42452-021-04307-y10.1007/s42452-021-04307-y ↗
14. Merneedi, Anjibabu, et al, (2021) Experimental investigation on mechanical properties of carbon nanotube-reinforced epoxy composites for automobile application." J Nanomater 202110.1155/2021/4937059 ↗
15. Merizgui T et al (2019) Mater Res Express 6(4):046102. https://doi.org/10.1088/2053-1591/aaf9de10.1088/2053-1591/aaf9de ↗
16. Arun Prakash VR et al (2019) Mater Res Express 6:076113. https://doi.org/10.1088/2053-1591/ab169410.1088/2053-1591/ab1694 ↗
17. Arun et al (2019). Silicon. https://doi.org/10.1007/s12633-019-00347-710.1007/s12633-019-00347-7 ↗
18. Natrayan L, Merneedi A, Bharathiraja G, Kaliappan S, Veeman D, Murugan P (2021) Processing and characterization of carbon nanofibre composites for automotive applications. J Nanomater 2021:1–710.1155/2021/7323885 ↗
19. Vincent et al (2022) Biomass Conv Bioref 12:4009–4019. https://doi.org/10.1007/s13399-020-00831-w10.1007/s13399-020-00831-w ↗
20. Mahadevaswamy et al. (2019) Materials Today: Proceedings, S2214785319332006–.https://doi.org/10.1016/j.matpr.2019.08.21110.1016/j.matpr.2019.08.211 ↗
21. Ramaswamy R, Gurupranes SV, Kaliappan S, Natrayan L, Patil PP (2022) Characterization of prickly pear short fiber and red onion peel biocarbon nanosheets toughened epoxy composites. Polym Compos 43(8):4899–490810.1002/pc.26735 ↗
22. Senthil Kumar S et al (2022) Mechanical, fracture toughness, and fatigue behavior of spinifex littoreus fiber on echinoidea-spike toughened epoxy composite.". Polym Compos 43(4):2329–234010.1002/pc.26543 ↗
23. Merizgui T et al (2018). Mater Res Express. https://doi.org/10.1088/2053-1591/11f9de10.1088/2053-1591/11f9de ↗
24. G. Devi, N Nagabhooshanam, M Chokkalingam, SK Sahu (2022) Polym Compos, 1. https://doi.org/10.1002/pc.2689810.1002/pc.26898 ↗
25. Samuel B et al (2021) Silicon 13:1703–1712. https://doi.org/10.1007/s12633-020-00569-010.1007/s12633-020-00569-0 ↗
26. Subbiah Ram et al (2022) Effect of nanosilica on mechanical, thermal, fatigue, and antimicrobial properties of cardanol oil/sisal fiber reinforced epoxy composite.". Polym Compos 43(11):7940–795110.1002/pc.26930 ↗
27. Thiyagu et al (2021). Biomass Conversion and Biorefnery. https://doi.org/10.1007/s13399-021-01941-910.1007/s13399-021-01941-9 ↗
28. Arun Prakash VR et al (2016) Appl Surf Sci 384(16):99–106. https://doi.org/10.1016/j.apsusc.2016.04.18510.1016/j.apsusc.2016.04.185 ↗
29. Alshahrani Hassan et al (2022) Effect of palmyra sprout fiber and biosilica on mechanical, wear, thermal and hydrophobic behavior of epoxy resin composite.". J Indust Text 52:1528083722113738210.1177/15280837221137382 ↗
30. Alshahrani Hassan et al (2022) Mechanical properties study on sandwich composites of glass fiber reinforced plastics (GFRP) using liquid thermoplastic resin, Elium®: preliminary experiments.". Coatings 12(10):142310.3390/coatings12101423 ↗