Influence of NiO Supported Silica Nanoparticles on Mechanical, Barrier, Optical and Antibacterial Properties of Polylactic Acid (PLA) Bio Nanocomposite Films for Food Packaging Applications
Source abstract
Abstract
This study aimed to prepare the nickel oxide supported on silica nanoparticles (NiO NPs) incorporated polylactic acid (PLA) bio nanocomposite films of various concentrations (0.25, 0.5. 0.75, 1 wt%) and study the resultant properties of NiO on the tensile, barrier, surface color, opacity and antibacterial properties for food packaging applications. The maximum tensile strength of 16.4 MPa was obtained at 1 wt% of the prepared biocomposite film. The barrier properties like oxygen transmission rate and water vapor transmission rate were significantly reduced and showed a better value of 841.20 (cc / (m2. day. atm)) and 3.96 (g/ m2 /day) on 1 wt% of NiO. The incorporation of NiO NPs increased the surface color (L*, a*, b*) and the opacity values were bio nanocomposite films. Also, the PLA / NiO bio nanocomposite films showed good antibacterial activity against gram-positive (L.monocytogenes) and gram-negative bacteria (Salmonella). Therefore, the prepared bio nanocomposite films could be used as an excellent packaging material for food packaging applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanocomposite Films for Food Packaging · biodegradable polymer synthesis and properties · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Adrar S, Habi A, Ajji A, Grohens Y (2018) Synergistic effects in epoxy functionalized graphene and modified organo-montmorillonite PLA/PBAT blends. Appl Clay Sci 157:65–75. https://doi.org/10.1016/j.clay.2018.02.02810.1016/j.clay.2018.02.028 ↗
2. Bach QV, Vu CM, Vu HT (2020) Effects of co-Silanized silica on the mechanical properties and thermal characteristics of natural rubber/styrene-butadiene rubber blend. Silicon 12:1799–1809. https://doi.org/10.1007/s12633-019-00281-810.1007/s12633-019-00281-8 ↗
3. Carja G, Nakajima A, Dranca C, Okada K (2010) Nanoparticles of nickel oxide: growth and organization on zinc-substituted anionic clay matrix by one-pot route at room temperature. J Nanopart Res 12:3049–3056. https://doi.org/10.1007/s11051-010-9899-010.1007/s11051-010-9899-0 ↗
4. Çoban O, Bora MÖ, Kutluk T, Özkoç G (2018) Mechanical and thermal properties of volcanic particle filled PLA/PBAT composites. Polym Compos 39:E1500–E1511. https://doi.org/10.1002/pc.2439310.1002/pc.24393 ↗
5. de Julián FC, Mattei G, Sada C et al (2006) Nanostructural and optical properties of cobalt and nickel-oxide/silica nanocomposites. Mater Sci Eng C 26:987–991. https://doi.org/10.1016/j.msec.2005.09.01310.1016/j.msec.2005.09.013 ↗
6. Gaikwad KK, Singh S, Ajji A (2019) Moisture absorbers for food packaging applications. Environ Chem Lett 17:609–628. https://doi.org/10.1007/s10311-018-0810-z10.1007/s10311-018-0810-z ↗
7. Gunti R, Ratna Prasad AV, Gupta AVSSKS (2018) Mechanical and degradation properties of natural fiber-reinforced PLA composites: jute, sisal, and elephant grass. Polym Compos 39:1125–1136. https://doi.org/10.1002/pc.2404110.1002/pc.24041 ↗
8. Gupta S, Sindhu S, Varman KA, Ramamurthy PC, Madras G (2012) Hybrid nanocomposite films of polyvinyl alcohol and ZnO as interactive gas barrier layers for electronics device passivation. RSC Adv 2:11536–11543. https://doi.org/10.1039/c2ra21714g10.1039/c2ra21714g ↗
9. Helan V, Prince JJ, Al-Dhabi NA et al (2016) Neem leaves mediated preparation of NiO nanoparticles and its magnetization, coercivity and antibacterial analysis. Results Phys 6:712–718. https://doi.org/10.1016/j.rinp.2016.10.00510.1016/j.rinp.2016.10.005 ↗
10. Kanmani P, Rhim JW (2014) Properties and characterization of bionanocomposite films prepared with various biopolymers and ZnO nanoparticles. Carbohydr Polym 106:190–199. https://doi.org/10.1016/j.carbpol.2014.02.00710.1016/j.carbpol.2014.02.007 ↗
11. Kaphle A, Navya PN, Umapathi A, Daima HK (2018) Nanomaterials for agriculture, food and environment: applications, toxicity and regulation. Environ Chem Lett 16:43–58. https://doi.org/10.1007/s10311-017-0662-y10.1007/s10311-017-0662-y ↗
12. Kumar R, Jha D, Panda AK (2019) Antibacterial therapeutics delivery systems based on biodegradable polylactide/polylactide-co-glycolide particles. Environ Chem Lett 17:1237–1249. https://doi.org/10.1007/s10311-019-00871-310.1007/s10311-019-00871-3 ↗
13. Li S, Yi J, Yu X, Wang Z, Wang L (2020) Preparation and characterization of pullulan derivative antibacterial composite films. Mater Sci Eng C 110:110721. https://doi.org/10.1016/j.msec.2020.11072110.1016/j.msec.2020.110721 ↗
14. Ma Y, Qian S, Hu L, Qian J, Fontanillo Lopez CA, Xu L (2019) Mechanical, thermal, and morphological properties of PLA biocomposites toughened with silylated bamboo cellulose nanowhiskers. Polym Compos 40:3012–3019. https://doi.org/10.1002/pc.2514410.1002/pc.25144 ↗
15. Marra A, Silvestre C, Duraccio D, Cimmino S (2016) Polylactic acid/zinc oxide biocomposite films for food packaging application. Int J Biol Macromol 88:254–262. https://doi.org/10.1016/j.ijbiomac.2016.03.03910.1016/j.ijbiomac.2016.03.039 ↗
16. Munteanu BS, Aytac Z, Pricope GM, Uyar T, Vasile C (2014) Polylactic acid (PLA)/silver-NP/VitaminE bionanocomposite electrospun nanofibers with antibacterial and antioxidant activity. J Nanopart Res 16. https://doi.org/10.1007/s11051-014-2643-410.1007/s11051-014-2643-4 ↗
17. Nan A, Leistner J, Turcu R (2013) Magnetite-polylactic acid nanoparticles by surface initiated organocatalysis ring opening polymerization J Nanoparticle Res 15. https://doi.org/10.1007/s11051-013-1869-x10.1007/s11051-013-1869-x ↗
18. Paydayesh A, Pashaei Soorbaghi F, Aref Azar A, Jalali-Arani A (2019) Electrical conductivity of graphene filled PLA/PMMA blends: experimental investigation and modeling. Polym Compos 40:704–715. https://doi.org/10.1002/pc.2472210.1002/pc.24722 ↗
19. Radusin T, Tomšik A, Šarić L, Ristić I, Giacinti Baschetti M, Minelli M, Novaković A (2019) Hybrid Pla/wild garlic antibacterial composite films for food packaging application. Polym Compos 40:893–900. https://doi.org/10.1002/pc.2475510.1002/pc.24755 ↗
20. Rai M, Ingle AP, Gupta I, Pandit R, Paralikar P, Gade A, Chaud MV, dos Santos CA (2019) Smart nanopackaging for the enhancement of food shelf life. Environ Chem Lett 17:277–290. https://doi.org/10.1007/s10311-018-0794-810.1007/s10311-018-0794-8 ↗
21. Rajivgandhi G, Maruthupandy M, Quero F, Li WJ (2019) Graphene/nickel oxide nanocomposites against isolated ESBL producing bacteria and A549 cancer cells. Mater Sci Eng C 102:829–843. https://doi.org/10.1016/j.msec.2019.05.00810.1016/j.msec.2019.05.008 ↗
22. Ramesh P, Prasad BD, Narayana KL (2020) Influence of Montmorillonite clay content on thermal, mechanical, Water Absorption and Biodegradability Properties of Treated Kenaf Fiber/ PLA-Hybrid Biocomposites Silicon https://doi.org/10.1007/s12633-020-00401-910.1007/s12633-020-00401-9 ↗
23. Rhim JW, Park HM, Ha CS (2013) Bio-nanocomposites for food packaging applications. Prog Polym Sci 38:1629–1652. https://doi.org/10.1016/j.progpolymsci.2013.05.00810.1016/j.progpolymsci.2013.05.008 ↗
24. Rojas K, Canales D, Amigo N, Montoille L, Cament A, Rivas LM, Gil-Castell O, Reyes P, Ulloa MT, Ribes-Greus A, Zapata PA (2019) Effective antibacterial materials based on low-density polyethylene (LDPE) with zinc oxide (ZnO) nanoparticles. Compos Part B Eng 172:173–178. https://doi.org/10.1016/j.compositesb.2019.05.05410.1016/j.compositesb.2019.05.054 ↗
25. Saravana S, Kandaswamy R (2019) Investigation on the mechanical and thermal properties of PLA/calcium silicate biocomposites for injection molding applications. Silicon 11:1143–1150. https://doi.org/10.1007/s12633-018-9926-910.1007/s12633-018-9926-9 ↗
26. Sarkar P, Choudhary R, Panigrahi S, Syed I, Sivapratha S, Dhumal CV (2017) Nano-inspired systems in food technology and packaging. Environ Chem Lett 15:607–622. https://doi.org/10.1007/s10311-017-0649-810.1007/s10311-017-0649-8 ↗
27. Seethamraju S, Kumar S, Bharadwaj KB et al (2016) Million-fold decrease in polymer moisture permeability by a Graphene monolayer. ACS Nano 10:6501–6509. https://doi.org/10.1021/acsnano.6b0258810.1021/acsnano.6b02588 ↗
28. Shankar S, Wang LF, Rhim JW (2018) Incorporation of zinc oxide nanoparticles improved the mechanical, water vapor barrier, UV-light barrier, and antibacterial properties of PLA-based nanocomposite films. Mater Sci Eng C 93:289–298. https://doi.org/10.1016/j.msec.2018.08.00210.1016/j.msec.2018.08.002 ↗
29. Slavin YN, Asnis J, Häfeli UO, Bach H (2017) Metal nanoparticles: understanding the mechanisms behind antibacterial activity. J Nanobiotechnol 15:1–20. https://doi.org/10.1186/s12951-017-0308-z10.1186/s12951-017-0308-z ↗
30. Sousa GM, Soares Júnior MS, Yamashita F (2013) Active biodegradable films produced with blends of rice flour and poly(butylene adipate co-terephthalate): effect of potassium sorbate on film characteristics. Mater Sci Eng C 33:3153–3159. https://doi.org/10.1016/j.msec.2013.03.04210.1016/j.msec.2013.03.042 ↗
31. Su JF, Huang Z, Yuan XY, Wang XY, Li M (2010) Structure and properties of carboxymethyl cellulose/soy protein isolate blend edible films crosslinked by Maillard reactions. Carbohydr Polym 79:145–153. https://doi.org/10.1016/j.carbpol.2009.07.03510.1016/j.carbpol.2009.07.035 ↗
32. Suresh S, Karthikeyan S, Saravanan P, Jayamoorthy K (2016) Comparison of antibacterial and antifungal activities of 5-amino-2-mercaptobenzimidazole and functionalized NiO nanoparticles. Karbala Int J Mod Sci 2:188–195. https://doi.org/10.1016/j.kijoms.2016.05.00110.1016/j.kijoms.2016.05.001 ↗
33. Venkata Prasad C, Sudhakara P, Prabhakar MN, Ur Rehman Shah A, Song JI (2018) An investigation on the effect of silica aerogel content on thermal and mechanical properties of sisal/PLA Nano composites. Polym Compos 39:835–840. https://doi.org/10.1002/pc.2400510.1002/pc.24005 ↗
34. Venkatesan R, Rajeswari N (2019) Preparation, mechanical and antibacterial properties of SiO 2/ poly(butylene adipate-co-terephthalate) films for active food packaging. Silicon 11:2233–2239. https://doi.org/10.1007/s12633-015-9402-810.1007/s12633-015-9402-8 ↗
35. Yadav M, Liu YK, Chiu FC (2019) Fabrication of cellulose nanocrystal/silver/alginate bionanocomposite films with enhanced mechanical and barrier properties for food packaging application. Nanomaterials 9. https://doi.org/10.3390/nano911152310.3390/nano9111523 ↗
36. Yang TI, Brown RNC, Kempel LC, Kofinas P (2010) Surfactant-modified nickel zinc iron oxide/polymer nanocomposites for radio frequency applications. J Nanopart Res 12:2967–2978. https://doi.org/10.1007/s11051-010-9887-410.1007/s11051-010-9887-4 ↗
37. Yoksan R, Chirachanchai S (2010) Silver nanoparticle-loaded chitosan-starch based films: fabrication and evaluation of tensile, barrier and antibacterial properties. Mater Sci Eng C 30:891–897. https://doi.org/10.1016/j.msec.2010.04.00410.1016/j.msec.2010.04.004 ↗
38. Zare Y, Shabani I (2016) Polymer/metal nanocomposites for biomedical applications. Mater Sci Eng C 60:195–203. https://doi.org/10.1016/j.msec.2015.11.02310.1016/j.msec.2015.11.023 ↗
39. Zhou Y, Lei L, Yang B, Li J, Ren J (2018) Preparation and characterization of polylactic acid (PLA) carbon nanotube nanocomposites. Polym Test 68:34–38. https://doi.org/10.1016/j.polymertesting.2018.03.04410.1016/j.polymertesting.2018.03.044 ↗
40. Zhou Y, Lei L, Yang B, Li J, Ren J (2017) Preparation of PLA-based nanocomposites modified by nano-attapulgite with good toughness-strength balance. Polym Test 60:78–83. https://doi.org/10.1016/j.polymertesting.2017.03.00710.1016/j.polymertesting.2017.03.007 ↗