Synthesis and Characterization of the in-situ Ti3SiC2 / Al2O3 Composite by SPS of Mechanically Activated Powders of TiO2, Al, C, and Si
Source abstract
Abstract
The formation of Ti3SiC2-Al2O3 composite by mechanical alloying and thermal treatment of TiO2, Si, Al, and graphite powders was investigated. The ball milling process was carried out for up to 40 h. To evaluate the formation mechanism of Ti3SiC2-Al2O3, both as-mixed and 40 h milled powder samples were annealed for 1 h at 1400 °C and 40 h milled sample was thermally treated by differential thermal analysis. Al3Ti and Al2O3 were only formed after 40 h of milling. The Ti3SiC2 MAX phase was formed after annealing 40 h milled powder at 1400 °C for 1 h. The results illustrated that the mechanism of Ti3SiC2 formation consisted of Al3Ti/Al2O3, TiC, and TiSi2 formation, the reaction among TiC and TiSi2 as well as Ti3SiC2 formation. The annealed 40 h milled powder was sintered by a spark plasma sintering process. The sintered sample was dense without any phase change and the nanoindentation result indicated a hardness of 9.52GPa with an elastic modulus of 316 GPa.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: MXene and MAX Phase Materials · Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Wang S, Cheng J, Zhu S, Ma J, Qiao Z, Yang J, Liu W (2017) A novel route to prepare a Ti3SnC2/Al2O3 composite. Scripta Mater 131:80–8310.1016/j.scriptamat.2017.01.013 ↗
2. Fattahi M, Zarezadeh Mehrizi M (2020) Formation mechanism for synthesis of Ti3SnC2 MAX phase. Materials Today Communications 25:10162310.1016/j.mtcomm.2020.101623 ↗
3. Zarezadeh Mehrizi M, Beygi R, Eisaabadi BG, Velashjerdi M, Nematzadeh F (2019) Mechanically activated combustion synthesis of Ti3AlC2/Al2O3 nanocomposite from TiO2/Al/C powder mixtures. Adv Powder Technol 30:311–31610.1016/j.apt.2018.11.007 ↗
4. Yu D, Tan Y (2021) Oxidation behaviors of compositionally complex MAX phases in air. Ceram Int 47:30188–3019310.1016/j.ceramint.2021.07.198 ↗
5. Zhang Z, Duan X, Jia D, Zhou Y, van der Zwaag S (2021) On the formation mechanisms and properties of MAX phases: A review. J Eur Ceram Soc 41:3851–387810.1016/j.jeurceramsoc.2021.02.002 ↗
6. Zarezadeh Mehrizi M, Beygi R (2018) Direct synthesis of Ti3AlC2-Al2O3 nanocomposite by mechanical alloying. J Alloy Compd 740:118–12310.1016/j.jallcom.2018.01.039 ↗
7. Perevislov SN, Sokolova TV, Stolyarova VL (2021) The Ti3SiC2 max phases as promising materials for high temperature applications: Formation under various synthesis conditions. Mater Chem Phys 267:12462510.1016/j.matchemphys.2021.124625 ↗
8. Zhang Z, Yang F, Zhang H, Zhang T, Wang H, Xu Y, Ma Q (2021) Influence of CeO2 addition on forming quality and microstructure of TiCx-reinforced CrTi4-based laser cladding composite coating. Mater Charact 171:11073210.1016/j.matchar.2020.110732 ↗
9. Akshay Kumar KP, Alduhaish O, Pumera M (2021) Electrocatalytic activity of layered MAX phases for the hydrogen evolution reaction. Electrochem Commun 125:10697710.1016/j.elecom.2021.106977 ↗
10. Qureshi MW, Ali MA, Ma X (2021) Screen the thermomechanical and optical properties of the new ductile 314 MAX phase boride Zr3CdB4: A DFT insight. J Alloy Compd 877:16024810.1016/j.jallcom.2021.160248 ↗
11. Guo C, Zhang Z, Wu Y, Wang Y, Ma G, Shi J, Zhong Z, Hong Z, Jin Z, Zhao Y (2022) Synergic realization of electrical insulation and mechanical strength in liquid nitrogen for high-temperature superconducting tapes with ultra-thin acrylic resin coating. Supercond Sci Technol 35:07501410.1088/1361-6668/ac6e0d ↗
12. Wu Y, Chen J, Zhang L, Ji J, Wang Q, Zhang S (2022) Effect of boron on the structural stability, mechanical properties, and electronic structures of γ′-Ni3Al in TLP joints of nickel-based single-crystal alloys. Materials Today Communications 31:10337510.1016/j.mtcomm.2022.103375 ↗
13. Wang HJ, Jin ZH, Miyamoto Y (2003) Ti3SiC2/Al2O3 composites prepared by SPS. Ceram Int 29:539–54210.1016/S0272-8842(02)00199-2 ↗
14. Ji J, Zhang L, Yu J, Lee WE, Middleburgh SC, Li D, Wang X, Li Q, Wang Z, Shi G, Chen F (2021) Interface properties of Ti3SiC2/Al2O3 ceramics: Combined experiments and first-principles calculations. Ceram Int 47:6409–641710.1016/j.ceramint.2020.10.221 ↗
15. Lv B-J, Wang S, Xu T-W, Guo F (2021) Effects of minor Nd and Er additions on the precipitation evolution and dynamic recrystallization behavior of Mg–6.0Zn–0.5Mn alloy. Journal of Magnesium and Alloys 9:840–85210.1016/j.jma.2020.06.018 ↗
16. Fan X, Wei G, Lin X, Wang X, Si Z, Zhang X, Shao Q, Mangin S, Fullerton E, Jiang L, Zhao W (2020) Reversible Switching of Interlayer Exchange Coupling through Atomically Thin VO2 via Electronic State Modulation. Matter 2:1582–159310.1016/j.matt.2020.04.001 ↗
17. Barsoum MW, El-Raghy T (1996) Synthesis and Characterization of a Remarkable Ceramic: Ti3SiC2. J Am Ceram Soc 79:1953–195610.1111/j.1151-2916.1996.tb08018.x ↗
18. Kwon H, Zhou X, Yoon D-H (2020) Fabrication of SiCf/Ti3SiC2 by the electrophoresis of highly dispersed Ti3SiC2 powder. Ceram Int 46:18168–1817410.1016/j.ceramint.2020.04.138 ↗
19. Islak BY, Ayas E (2019) Evaluation of properties of spark plasma sintered Ti3SiC2 and Ti3SiC2/SiC composites. Ceram Int 45:12297–1230610.1016/j.ceramint.2019.03.144 ↗
20. Han M-C, Cai S-Z, Wang J, He H-W, Single-Side Superhydrophobicity in Si3N4-Doped and SiO2-Treated Polypropylene Nonwoven Webs with Antibacterial Activity, Polymers, 2022.10.3390/polym14142952 ↗
21. Lu T, Yan W, Feng G, Luo X, Hu Y, Guo J, Yu Z, Zhao Z, Ding S (2022) Singlet oxygen-promoted one-pot synthesis of highly ordered mesoporous silica materials via the radical route. Green Chem 24:4778–478210.1039/D2GC00869F ↗
22. Aghamohammadi H, Heidarpour A, Jamshidi R (2018) The phase and morphological evolution of Ti3SiC2 MAX phase powder after HF treatment. Ceram Int 44:17992–1800010.1016/j.ceramint.2018.06.278 ↗
23. Chen D, Gu H, Huang A, Ni H (2019) Mechanical performance and oxidation resistance of SiC castables with lamellar Ti3SiC2 coatings on SiC aggregates prepared by SPS. J Alloy Compd 791:461–46810.1016/j.jallcom.2019.03.358 ↗
24. Qi F, Shi G, Xu K, Su T, Wang Z, Wu J, Li Q, Wu H, Zhang L, Zhu R, Yang B (2019) Microstructure and mechanical properties of hot pressed Ti3SiC2/Al2O3. Ceram Int 45:11099–1110410.1016/j.ceramint.2019.01.241 ↗
25. Yeh CL, Li RF, Shen YG (2009) Formation of Ti3SiC2–Al2O3 in situ composites by SHS involving thermite reactions. J Alloy Compd 478:699–70410.1016/j.jallcom.2008.11.131 ↗
26. Zhao W, Suo H, Wang S, Ma L, Wang L, Wang Q, Zhang Z (2022) Mg gas infiltration for the fabrication of MgB2 pellets using nanosized and microsized B powders. J Eur Ceram Soc 42:7036–704810.1016/j.jeurceramsoc.2022.08.029 ↗
27. Xie J, Zhang J, Zhang Z, Yang Q, Guan K, He Y, Wang R, Zhang H, Qiu X, Wu R (2022) New insights on the different corrosion mechanisms of Mg alloys with solute-enriched stacking faults or long period stacking ordered phase. Corros Sci 198:11016310.1016/j.corsci.2022.110163 ↗
28. Cai Y, Yin H, Pan L, Chen P, Sun G (2013) Microstructures and mechanical properties of Ti3SiC2/TiC–Al2O3 composites synthesized by reactive hot pressing. Mater Sci Eng, A 571:137–14310.1016/j.msea.2013.02.017 ↗
29. Zarezadeh Mehrizi M, Mostaan H, Beygi R, Rafiei M, Abbasian AR (2018) Reaction Pathways of Nanocomposite Synthesized in-situ from Mechanical Activated Al–C–TiO2 Powder Mixture. Russian Journal of Non-Ferrous Metals 59:117–12210.3103/S1067821218010108 ↗
30. Zarezadeh Mehrizi M, Shamanian M, Saidi A (2014) Synthesis of CoWSi–WSi2 nanocomposite by mechanical alloying and subsequent heat treatment. Ceram Int 40:9493–949810.1016/j.ceramint.2014.02.022 ↗
31. Liang L, Xu M, Chen Y, Zhang T, Tong W, Liu H, Wang H, Li H (2021) Effect of welding thermal treatment on the microstructure and mechanical properties of nickel-based superalloy fabricated by selective laser melting. Mater Sci Eng, A 819:14150710.1016/j.msea.2021.141507 ↗
32. Zarezadeh Mehrizi M, Saidi A, Shamanian M (2011) Production of Fe3Al–TiC nanocomposite by mechanical alloying of FeTi2–Al–C powders. Mater Sci Technol 27:1465–146810.1179/026708310X12756557336030 ↗
33. Li X-Y, Song Y, Zhang C-X, Zhao C-X, He C (2021) Inverse CO2/C2H2 separation in a pillared-layer framework featuring a chlorine-modified channel by quadrupole-moment sieving. Sep Purif Technol 279:11960810.1016/j.seppur.2021.119608 ↗
34. Zhu H, Zhao R (2022) Nucleation of CVD-prepared hexagonal boron nitride on Ni(100), Ni(110) and Ni(111) surfaces: A theoretical study. Vacuum 205:11139610.1016/j.vacuum.2022.111396 ↗
35. Xia W, Zarezadeh Mehrizi M (2021) Direct synthesis of NiAl intermetallic matrix composite with TiC and Al2O3 reinforcements by mechanical alloying of NiO–Al–Ti–C powder mixture. Ceram Int 47:26863–2686810.1016/j.ceramint.2021.06.095 ↗
36. Li S-B, Zhai H-X (2005) Synthesis and Reaction Mechanism of Ti3SiC2 by Mechanical Alloying of Elemental Ti, Si, and C Powders. J Am Ceram Soc 88:2092–209810.1111/j.1551-2916.2005.00417.x ↗
37. Yeh CL, Chou CC, Hwang PW (2016) Formation of Ti5Si3 by Combustion Synthesis in a Self-Propagating Mode: Experimental Study and Numerical Simulation. High Temp Mater Processes (London) 35:769–77410.1515/htmp-2015-0079 ↗
38. Zarezadeh Mehrizi MZ, Beygi R, Eisaabadi G (2016) Synthesis of Al/TiC–Al2O3 nanocomposite by mechanical alloying and subsequent heat treatment. Ceram Int 42:8895–889910.1016/j.ceramint.2016.02.144 ↗
39. Byun CS, Bopark S, Kim DK, Lee W, Hyun CY, Reucroft PJ (2001) Formation mechanism of titanium silicide by mechanical alloying. J Mater Sci 36:363–36910.1023/A:1004816210156 ↗
40. Sabooni S, Karimzadeh F, Abbasi MH (2012) Thermodynamic aspects of nanostructured Ti5Si3 formation during mechanical alloying and its characterization. Bull Mater Sci 35:439–44710.1007/s12034-012-0298-2 ↗
41. Hu Q, Luo P, Yan Y (2008) Microstructures, densification and mechanical properties of TiC–Al2O3–Al composite by field-activated combustion synthesis. Mater Sci Eng, A 486:215–22110.1016/j.msea.2007.08.075 ↗
42. Binnewies M, Mikle E (2002) Thermochemical data of Elements and Compounds. WILEY-VCH, Germany10.1002/9783527618347 ↗
43. Amel-Farzad H, Vahdati-Khaki J, Haerian A (2013) Air-exposed combustion synthesis of Al2O3 nanofibers in Al/TiO2/C system. Ceram Int 39:1871–187610.1016/j.ceramint.2012.08.035 ↗
44. Sharifitabar M (2020) On the formation of Al2O3 nanofibers during self-propagating high-temperature synthesis of TiO2–Al–C system in various environments. Ceram Int 46:17053–1706110.1016/j.ceramint.2020.04.001 ↗
45. Turki F, Abderrazak H, Schoenstein F, Têtard F, Abdellaoui M, Jouini N (2019) Physico-chemical and mechanical properties of Ti3SiC2-based materials elaborated from SiC/Ti by reactive spark plasma sintering. Journal of Advanced Ceramics 8:47–6110.1007/s40145-018-0290-4 ↗
46. Kooi BJ, Poppen RJ, Carvalho NJM, De Hosson JTM, Barsoum MW (2003) Ti3SiC2: A damage tolerant ceramic studied with nano-indentations and transmission electron microscopy. Acta Mater 51:2859–287210.1016/S1359-6454(03)00091-0 ↗
47. Barsoum MW (2000) The MN+1AXN phases: A new class of solids: Thermodynamically stable nanolaminates. Prog Solid State Chem 28:201–28110.1016/S0079-6786(00)00006-6 ↗