Design and Application of Double-Gate MOSFET in Two Loops Controlled Multi-Input DC-DC Converter
Source abstract
Abstract
This paper aims to design and analyze the performance of double gate silicon based MOSFET and then it is utilized to implement multi-input dc–dc converter for dc grid application. Double gate MOSFET is preferred here because of its high drive current ability. A digital controller suitable for a two-input boost-SEPIC dc-dc converter is outlined using the designed MOSFET. The modelling of the converter has been done using state-space analysis followed by the designing of converter energy storage elements and voltage gain expression of the converter system. The Interaction analysis is performed to find the best pairing of the controlled variables using Relative Gain Array, Scaled Gain Matrix, and RGA Number. A decentralized controller is designed using interaction analysis. The robustness of the controllers is verified with parametric uncertainties. The response of the system with decentralized controllers against source voltage and load variations is observed. An experimental prototype of 150 watt with two input source of magnitude 24 V and 36 V is made with designed parameters to test in the laboratory. Finally, the effectiveness of the controller is verified for source and load regulation. The simulation and experimental results are in close agreement, which ensures the robustness of the controller.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Semiconductor Devices and Circuit Design · Silicon Carbide Semiconductor Technologies · Advanced DC-DC Converters
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Liu YC, Chen YM (2009) A systematic approach to synthesizing multiple-input dc-dc converter. IEEE Trans Power Electron 24(1):116–12710.1109/TPEL.2008.2009170 ↗
2. Tewari VK, Verma A (2021) Two-Loop Controlled Quasi Multiple-Input DC-–DC Converter for Load Voltage and Source Current Management. Trans Electr Electron Mater:1–910.1007/s42341-021-00320-5 ↗
3. Veerachary M, Tewari VK, Anandh N (2013) Two-input boosting dc-dc converter for dc-grid applications. International conference on green computing, communication and conservation of energy (ICGCE). IEEE, pp 574–57910.1109/ICGCE.2013.6823501 ↗
4. Wang Z, Luo Q, Wei Y, Mou D, Lu X, Sun P (2020) Topology analysis and review of three-port DC/DC converters. IEEE Trans Power Electron10.1109/TPEL.2020.2985287 ↗
5. Jeong Y, Park J-D, Rorrer R, Kim K-W, Lee B-H (2020) A novel multi-input and single-output DC/DC converter for small unmanned aerial vehicle. IEEE applied power electronics conference and exposition (APEC). IEEE, pp 1302–130810.1109/APEC39645.2020.9124144 ↗
6. Shan Z, Ding X, Jatskevich J, Chi KT (2020) Synthesis of multi-input multi-output DC/DC converters without energy buffer stages. IEEE Transactions on Circuits and Systems II: Express Briefs 68(2):712–71610.1109/TCSII.2020.3015388 ↗
7. Athikkal S (2020) A three input DC-DC converter for hybrid energy application. Int J Electric Engin Technol 11(4)10.34218/IJEET.11.4.2020.008 ↗
8. Zhu B, Hu H, Wang H, Yang L (2020) A multi-input-port bidirectional DC/DC converter for DC microgrid energy storage system applications. Energies 13(11):281010.3390/en13112810 ↗
9. Chen D, Zeng H (2020) A Buck type multi-input distributed generation system with parallel-timesharing power supply. IEEE Access 8:79958–7996810.1109/ACCESS.2020.2990467 ↗
10. Singh S, Raj B (2020) Modeling and simulation analysis of SiGe heterojunction double gate vertical t-shaped tunnel FET. Superlattice Microst 142:10649610.1016/j.spmi.2020.106496 ↗
11. Amaleswari R, Prabhakar M (2020) Non-isolated multi-input DC-DC converter with current sharing mechanism. Int J Electron:1–2710.1080/00207217.2020.1789760 ↗
12. Singh J, Raj B (2019) Design and investigation of 7T2M-NVSRAM with enhanced stability and temperature impact on store/restore energy. IEEE Trans Very Large Scale Integr (VLSI) Syst 27(6):1322–132810.1109/TVLSI.2019.2901032 ↗
13. Silvaco, ATLAS user’S (2018) Manual device. "Simulation Software", vol 444. Silvaco International, Santa Clara CA
14. Varesi K, Hosseini SH, Sabahi M, Babaei E (2018) Modular non-isolated multi-input high step-up dc-dc converter with reduced normalized voltage stress and component count. IET Power Electron 11(6):1092–110010.1049/iet-pel.2017.0483 ↗
15. Athikkal S (2018) KumaravelSundaramoorthy, and Ashok Sankar. "development and performance analysis of dual-input DC–DC converters for DC microgrid application". IEEJ Trans Electr Electron Eng 13(7):1034–104310.1002/tee.22661 ↗
16. Varesi K (2018) Seyed Hossein Hosseini, Mehran Sabahi, and Ebrahim Babaei. "Modular non-isolated multi-input high step-up dc–dc converter with reduced normalized voltage stress and component count". IET Power Electron 11(6):1092–110010.1049/iet-pel.2017.0483 ↗
17. Singh S, Sharma A, Kumar V, Umar P, Rao AK, Singh AK (2021) Investigation of N+ SiGe juntionless vertical TFET with gate stack for gas sensing application. App Phys A 127(9):1–11
18. Varesi K, Hosseini SH, Sabahi M, Babaei E (2018) A high-voltage gain non-isolated noncoupled inductor based multi-input DC-DC topology with reduced number of components for renewable energy systems. Int J Circuit Theory App 46(3):505–51810.1002/cta.2428 ↗
19. Singh S, Yadav S, Bhalla SK (2021) An Improved Analytical Modeling and Simulation of Gate Stacked Linearly Graded Work Function Vertical TFET. Silicon:1–1410.1007/s12633-021-01244-8 ↗
20. AboReada H, Williamson SS, Sood V (2019) Analysis and control of multi-input, single-output, non-isolated DC/DC converter for effective renewable energy management. IEEE transportation electrification conference and expo (ITEC). IEEE, pp 1–610.1109/ITEC.2019.8790542 ↗
21. Singh S, Raj B (2020) Design and analysis of I ON and Ambipolar current for vertical TFET. Manufacturing engineering. Springer, Singapore, pp 541–55910.1007/978-981-15-4619-8_39 ↗
22. Veerachary M, Tiwari VK (2014) Power management in dc-grid through two input dc-dc converter. Eighteenth National Power Systems Conference (NPSC). IEEE, pp 1–610.1109/NPSC.2014.7103876 ↗
23. Singh S, Raj B (2021) Analysis of ONOFIC technique using SiGe heterojunction double gate vertical TFET for low power applications. Silicon 13(7):2115–212410.1007/s12633-020-00634-8 ↗
24. Al-Naseem O, Erickson RW, Carlin P (2000) Prediction of switching loss variations by averaged switch modeling. APEC 2000. Fifteenth annual IEEE applied power electronics conference and exposition (cat. No. 00CH37058), vol 1. IEEE, pp 242–24810.1109/APEC.2000.826111 ↗
25. Shen Z, John YX, Cheng X, Fu Y, Kumar P (2006) Power MOSFET switching loss analysis: a new insight. Conference record of the 2006 IEEE industry applications conference forty-first IAS annual meeting, vol 3. IEEE, pp 1438–144210.1109/IAS.2006.256719 ↗
26. Singh S, Raj B (2021) Analytical and compact modeling analysis of a SiGe hetero-material vertical L-shaped TFET. Silicon:1–1110.1007/s12633-021-01009-3 ↗
27. Peng L, Kang Y, Pei X, Chen J (2007) A novel PWM technique in digital control. IEEE Trans Ind Electron 54(1):338–34610.1109/TIE.2006.885135 ↗
28. Datasheets of Driver Circuit I.C IR2110 (n.d.) Opto isolator 6N137, Diode MUR 1560, MOSFET IRFP250N
29. Singh S, Raj B (2020) Analytical modeling and simulation analysis of T-shaped III-V heterojunction vertical T-FET. Superlattice Microst 147:10671710.1016/j.spmi.2020.106717 ↗
30. Singh S, Raj B (2019) Design and analysis of a heterojunction vertical t-shaped tunnel field effect transistor. J Electron Mater 48(10):6253–626010.1007/s11664-019-07412-2 ↗