Doping Effect of SiC over Graphene on Dry Sliding Wear Behaviour of Mg/SiC@r-GO MMCs and its Surface Characterization
Source abstract
Abstract
In this research, solvent based powder metallurgy is used to develop Silicon Carbide (SiC) doped reduced Graphene Oxide(r-GO) reinforced magnesium composite. SiC was doped with r-GO with varying wt.% (10 & 20) by adopting hydrothermal method. Influence of SiC doping over r-GO in wear resistance of developed composite was investigated by pin on disc method. Taguchi based Artificial neural network (ANN) was used to attain optimal wear parameter and to study the influence of wear parameter by developing a mathematical model. From ANOVA results it has been observed that wt.% of reinforcement play an important role in governing the wear loss of fabricated MMC. The developed ANN model exhibits accuracy of about 99.9% when subjected to predict the wear loss. Formation of tribolayer and plastic deformation were notified from worn surface morphology, thus evidencing for the occurrence of delamination and oxidation wear.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Tribology and Wear Analysis · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Nguyen QB, Sim YHM, Gupta M, Lim CYH (2014) Tribology international tribology characteristics of magnesium alloy AZ31B and its composites. Tribiol Int, 1–8. https://doi.org/10.1016/j.triboint.2014.02.02410.1016/j.triboint.2014.02.024 ↗
2. Seenuvasaperumal P, Elayaperumal A, Jayavel R (2017) Tribology international influence of calcium hexaboride reinforced magnesium composite for the mechanical and tribological behviour. Tribiol Int 111:18–25. https://doi.org/10.1016/j.triboint.2017.02.04210.1016/j.triboint.2017.02.042 ↗
3. Gawel L, Nieuzyla L, Nawrat G, Darowicki K, Slepski P (2017) Impedance monitoring of corrosion degradation of plasma electrolytic oxidation coatings (PEO) on magnesium alloy. J Alloys Compd10.1016/j.jallcom.2017.06.120 ↗
4. Dai J-H, Jiang B, Peng C, Pan F-S (2017) Effect of Mn additions on diffusion behavior of Fe in molten magnesium alloys by solid-liquid diffusion couples. J Alloys Compd 710:260–26610.1016/j.jallcom.2017.03.245 ↗
5. Jia J, Xu Y, Yang Y, Chen C, Liu W, Hu L, Luo J (2017) Microstructure evolution of an AZ91D magnesium alloy subjected to intense plastic straining. J Alloys Compd10.1016/j.jallcom.2017.06.009 ↗
6. Kumarasamy SP, Vijayananth K, Thankachan T, Muthukutti GP (2017) Investigations on mechanical and machinability behavior of aluminum/flyash cenosphere/Gr hybrid composites processed through compocasting. J Appl Res Technol 15:430–44110.1016/j.jart.2017.05.005 ↗
7. Kaushik NC, Rao RN (2016) Tribology international effect of grit size on two body abrasive wear of Al 6082 hybrid composites produced by stir casting method. Tribiol Int 102:52–60. https://doi.org/10.1016/j.triboint.2016.05.01510.1016/j.triboint.2016.05.015 ↗
8. Kaushik NC, Rao RN (2016) Tribology international effect of applied load and grit size on wear coef fi cients of Al 6082 – SiC – Gr hybrid composites under two body abrasion. Tribiol Int 103:298–308. https://doi.org/10.1016/j.triboint.2016.07.01810.1016/j.triboint.2016.07.018 ↗
9. Turan ME, Sun Y, Akgul Y, Turen Y, Ahlatci H (2017) The effect of GNPs on wear and corrosion behaviors of pure magnesium. J Alloys Compd 724:14–2310.1016/j.jallcom.2017.07.022 ↗
10. Zhang D, Zhan Z (2016) Preparation of graphene nanoplatelets-copper composites by a modified semi-powder method and their mechanical properties. J Alloys Compd 658:663–67110.1016/j.jallcom.2015.10.252 ↗
11. Uysal M, Akbulut H, Tokur M, Algül H, Çetinkaya T (2016) Structural and sliding wear properties of Ag/Graphene/WC hybrid nanocomposites produced by electroless co-deposition. J Alloys Compd 654:185–19510.1016/j.jallcom.2015.08.264 ↗
12. Asgharzadeh H, Sedigh M (2017) Synthesis and mechanical properties of Al matrix composites reinforced with few-layer graphene and graphene oxide. J Alloys Compd 728:47– 6210.1016/j.jallcom.2017.08.268 ↗
13. Kavimani V, Prakash KS, Rajesh R, Rammasamy D, Selvaraj N B, Yang T, Prabakaran B, Jothi S (2017) Electrodeposition of r-GO/SiC nano-composites on magnesium and its corrosion behavior in aqueous electrolyte. Appl Surf Sci 424:63–7110.1016/j.apsusc.2017.02.082 ↗
14. Carvalho GM, Buciumeanu M, Madeira S, Soares D, Silva FS (2015) Dry sliding wear behaviour of AlSi-CNTs-SiCp hybrid composites. Tribiol Int. 90:148–156. https://doi.org/10.1016/j.triboint.2015.04.03110.1016/j.triboint.2015.04.031 ↗
15. Chih JAPA, Ansón-Casaos A (2017) Frictional and mechanical behavior of graphene/UHMWPE composite coatings. Tribol Int 116:295–302. https://doi.org/10.1016/j.triboint.2017.07.02710.1016/j.triboint.2017.07.027 ↗
16. Kavimani V, Prakash KS, Pandian MA (2017) Influence of r-GO addition on enhancement of corrosion and wear behavior of AZ31 MMC. Appl Phys A 123:1–11. https://doi.org/10.1007/s00339-017-1118-810.1007/s00339-017-1118-8 ↗
17. Rashad M, Pan F, Tang A, Asif M, Aamir M (2014) Synergetic effect of graphene nanoplatelets (GNPs) and multi-walled carbon nanotube (MW-CNTs) on mechanical properties of pure magnesium. J Alloys Compd 603:111–118. https://doi.org/10.1016/j.jallcom.2014.03.03810.1016/j.jallcom.2014.03.038 https://doi.org/10.1016/j.jallcom.2014.03.038 ↗
18. Wu W, Gui J, Sai W, Xie Z (2017) The reinforcing effect of graphene nano-platelets on the cryogenic mechanical properties of GNPs/Al 2 O 3 composites. J Alloys Compd 691:778–78510.1016/j.jallcom.2016.08.314 ↗
19. Jiang H, Wang H, Liu G, Su Z, Wu J, Liu J, Zhang X, Chen Y, Zhou W (2017) Light-weight, flexible, low-voltage electro-thermal film using graphite nanoplatelets for wearable/smart electronics and deicing devices. J Alloys Compd 699:1049–105610.1016/j.jallcom.2016.12.435 ↗
20. Cheng Z-L, Li W, Wu P-R, Liu Z (2017) Study on structure-activity relationship between size and tribological properties of graphene oxide nanosheets in oil. J Alloys Compd10.1016/j.jallcom.2017.06.161 ↗
21. Prakash KS, Balasundar P, Nagaraja S, Gopal PM (2016) Mechanical and wear behaviour of Mg – SiC – Gr hybrid composites. J Magnes Alloy 4:197–206. https://doi.org/10.1016/j.jma.2016.08.00110.1016/j.jma.2016.08.001 https://doi.org/10.1016/j.jma.2016.08.001 ↗
22. Hamidreza Ghandvar MHI, Farahany S (2016) Effect of wettability enhancement of SiC particles on impact toughness and dry sliding wear behavior of compocasted A356/20SiCp composites. Tribol Trans, 1–2. https://doi.org/10.1080/10402004.2016.127590210.1080/10402004.2016.1275902 ↗
23. Hekner B, Myalski J, Valle N, Botor-probierz A, Sopicka-lizer M, Wieczorek J (2017) Friction and wear behavior of Al-SiC(n) hybrid composites with carbon addition. Compos Part B 108:291–300. https://doi.org/10.1016/j.compositesb.2016.09.10310.1016/j.compositesb.2016.09.103 ↗
24. Huang Y, Xue B, Shi X, Yang K, Zhai W, Xiao Y, Road L (2016) Study on tribological performance of NiAl matrix self-lubricating composites containing graphene at different loads Yuchun. Tribol Trans, 1–10
25. Rashed FS, Mahmoud TS (2009) Tribology international prediction of wear behaviour of A356 / SiC p MMCs using neural networks 42:642–648. https://doi.org/10.1016/j.triboint.2008.08.01010.1016/j.triboint.2008.08.010 ↗
26. Gyurova LA, Friedrich K (2011) Artificial neural networks for predicting sliding friction and wear properties of polyphenylene sulfide composites. Tribol Int 44:603–609. https://doi.org/10.1016/j.triboint.2010.12.01110.1016/j.triboint.2010.12.011 ↗
27. Gopal PM, Prakash KS, Nagaraja S, Aravinth K (2017) Effect of weight fraction and particle size of CRT glass on the tribological behaviour of Mg-CRT-BN hybrid composites. Tribol Int 116:338–350. https://doi.org/10.1016/j.triboint.2017.07.02510.1016/j.triboint.2017.07.025 ↗
28. Kavimani V, Prakash KS, Thankachan T (2017) Surface characterization and specific wear rate prediction of r-GO / AZ31 composite under dry sliding wear condition. Surf Interf 6:143–153. https://doi.org/10.1016/j.surfin.2017.01.00410.1016/j.surfin.2017.01.004 ↗
29. Moazami-goudarzi M, Akhlaghi F (2016) Wear behavior of Al 5252 alloy reinforced with micrometric and nanometric SiC particles. Tribiol Int 120:28–37. https://doi.org/10.1016/j.triboint.2016.05.01310.1016/j.triboint.2016.05.013 ↗
30. Jun Zhao JL, He Y, Wang Y, Wang W, Yan L (2016) An investigation on the tribological properties of multilayer graphene and MoS2 nanosheets as additives used in hydraulic applications. Tribiol Int 97:14–20. https://doi.org/10.1016/j.triboint.2015.12.00610.1016/j.triboint.2015.12.006 ↗
31. Wang C, Ye Y, Guan X, Hu J, Wang Y, Li J (2016) An analysis of tribological performance on Cr/GLC film coupling with Si3N4, SiC, WC, Al2O3 and ZrO2 in seawater Chunting. Tribiol Int 96:77–86. https://doi.org/10.1016/j.triboint.2015.12.01010.1016/j.triboint.2015.12.010 ↗
32. Kavimani V, Prakash KS (2017) Tribological behaviour predictions of r-GO reinforced Mg composite using ANN coupled Taguchi approach. J Phys Chem Solids 110:409–41910.1016/j.jpcs.2017.06.028 ↗