Microwave Absorption Properties of Polyaniline/Carbonyl Iron Composites
Source abstract
Abstract
In this work, carbonyl iron (CI) containing polya- niline composites (PANI+CI) were prepared via in-situ polymerization of aniline in an aqueous solution containing different amounts of CI as the magnetic filler for the micro- wave absorbers. The incorporation of the magnetic powder to the PANI matrix was confirmed by X-ray diffraction (XRD), IR and SEM. Synthesized PANI+CI composite particles were subsequently added to an epoxy resin matrix to produce related R-PANI+CI composites. Study of thermal properties by thermogravimetric analysis revealed enhanced thermal stability of the composites. The electromagnetic-absorbing properties were studied by measuring the reflection loss in the frequency range of 8.0 to 12.0 GHz. The experimental results indicated that the electromagnetic wave absorbing properties of PANI+CI composites are dependent on the PANI/CI weight ratio. The good reflection loss of the composite at the optimum PANI/CI weight ratio of 1:6 suggests its potential applicability as a good radar absorber.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electromagnetic wave absorption materials · Conducting polymers and applications · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Joshi A, Athawale A (2014) Electrically conductive silicone/organic polymer composites. Silicon 6:199–20610.1007/s12633-013-9171-1 ↗
2. Wu J, Chung DDL (2008) Combined use of magnetic and electrically conductive fillers in a polymer matrix for electromagnetic interference shielding. J Electron Mater 37:1088–109410.1007/s11664-008-0486-4 ↗
3. Didehban K, Yarahmadia E, Nouri-Ahangarani F, Mirmohammadi SA, Bahri-Laleh N (2016) Radar absorption properties of Ni 0.5Zn 0.5Fe 2O 4/PANI/epoxy nanocomposites. J Chin Chem Soc 62:826–83110.1002/jccs.201500136 ↗
4. Zhang W, Choi H (2012) Dynamic response of a graphene oxide-polyaniline composite suspension under an applied electric field. J Korean Phys Soc 61:1422–142510.3938/jkps.61.1422 ↗
5. Lin S-J, Sun H-J, Peng T-J, Jiang L-H (2014) Synthesis of high-performance polyaniline/graphene oxide nanocomposites. High Perform Polym 26:790–79710.1177/0954008314529982 ↗
6. Abshinova MA, Lopatin AV, Kazantseva NE, Vilcáková J, Sáha P (2007) Correlation between the microstructure and the electromagnetic properties of carbonyl iron filled polymer composites. Compos A: Appl Sci Manuf 38:2471–248510.1016/j.compositesa.2007.08.002 ↗
7. Ji X, Lu M, Ye F, Zhou Q (2012) Microwave absorption properties of flake graphite and carbonyl-iron particles filled aliphatic polyurethane resin. Adv Mechanical Eng Appl 3:294
8. Liu YD, Choi HJ (2012) Carbon nanotube-coated silicated soft magnetic carbonyl iron microspheres and their magnetorheology. J Appl Phys 111:07B50210.1063/1.3670603 ↗
9. Abshinova MA, Kazantseva NE, Saha P, Sapurina I, Kovarova J, Stejskal J (2008) The enhancement of the oxidation resistance of carbonyl iron by polyaniline coating and consequent changes in electromagnetic properties. Polym Degrad Stab 93:1826–183110.1016/j.polymdegradstab.2008.07.008 ↗
10. Mrlik M, Sedlacik M, Pavlinek V, Bazant P, Saha P, Peer P, Filip P (2013) Synthesis and magnetorheological characteristics of ribbon-like, polypyrrole-coated carbonyl iron suspensions under oscillatory shear. J Appl Polym Sci 128:2977–298210.1002/app.38473 ↗
11. Feng YB, Qiu T, Shen CY (2007) Absorbing properties and structural design of microwave absorbers based on carbonyl iron and barium ferrite. J Magn Magn Mater 318:8–1310.1016/j.jmmm.2007.04.012 ↗
12. Sedaghat S, Soleimani Alavijeh M (2014) Modification of conductive polyaniline with carbon nanomaterials. Int Nano Lett 4:115-10.1007/s40089-014-0115-6 ↗
13. Bhadra S, Khastgir D (2008) Determination of crystal structure of polyaniline and substituted polyanilines through powder X-ray diffraction analysis. Polym Test 27:851–85710.1016/j.polymertesting.2008.07.002 ↗
14. Liu L, Duan Y, Liu S, Chen L, Guo J (2010) Microwave absorption properties of one thin sheet employing carbonyl–iron powder and chlorinated polyethylene. J Magn Magn Mater 322:1736–174010.1016/j.jmmm.2009.12.017 ↗
15. Mehdipour-Ataei S, Bahri-Laleh N (2008) Preparation and characterization of thermally stable poly(amide-urea)s functionalized with anthraquinone chromophore. Polym Adv Technol 19:291–29810.1002/pat.1009 ↗
16. Mehdipour-Ataei S, Bahri-Laleh N, Rabei A, Saidi S (2007) Structure-property relationships of soluble poly(ester-urea)s containing naphthyl groups. High Perform Polym 19:283–29510.1177/0954008307076507 ↗
17. Mehdipour-Ataei S, Bahri-Laleh N, Amirshaghaghi A (2006) Comparison of one-step and two-step methods of polyimidization and substitution effect in the synthesis of new poly(ester-imide)s with bulky pendent group. Polym Degrad Stab 91:2622–263110.1016/j.polymdegradstab.2006.05.004 ↗
18. Mehdipour-Ataei S, Arabi H, Bahri-Laleh N (2006) New soluble, thermally stable poly(amide–imide)s containing cardo anthraquinone unit. Eur Polym J 42:2343–235110.1016/j.eurpolymj.2006.06.006 ↗
19. Mehdipour-Ataei S, Amirshaghaghi A, Bahri N (2006) Structure–property relations in heat resistant polyesters with built-in ether and imide units. Eur Polym J 42:2646–265410.1016/j.eurpolymj.2006.06.029 ↗
20. Mirmohammadi SA, Nekoomanesh-Haghighi M, Mohammadian Gezaz S, Bahri-Laleh N (2016) Polybutadiene/polyhedral oligomeric silsesquioxane nanohybrid: investigation of various reactants in polyesterification reaction. Polym Int 65:516–52510.1002/pi.5085 ↗
21. Mehdipour-Ataei S, Bahri-Laleh N (2006) Synthesis and properties of polyimides and copolyimides containing pyridine units: a review. Iran Polym J 17:95
22. Wu KH, Ting TH, Wang GP, Ho WD, Shih CC (2008) Effect of carbon black content on electrical and microwave absorbing properties of polyaniline/carbon black nanocomposites. Polym Degrad Stab 93:483–48810.1016/j.polymdegradstab.2007.11.009 ↗
23. Fan Y, Yang H, Li M, Zou G (2009) Evaluation of the microwave absorption property of flake graphite. Mater Chem Phys 115:696–69810.1016/j.matchemphys.2009.02.010 ↗
24. Zhu Y-F, Fu Y-Q, Natsuki T, Ni Q-Q (2013) Fabrication and microwave absorption properties of BaTiO3 nanotube/polyaniline hybrid nanomaterials. Polym Compos 34:265–27310.1002/pc.22409 ↗
25. Azadmanjiri J, Hojati-Talemi P, Simon GP, Suzuki K, Selomulya C (2011) Synthesis and electromagnetic interference shielding properties of iron oxide/polypyrrole nanocomposites. Polym Eng Sci 51:247–25310.1002/pen.21813 ↗