Multiresponse Optimization for Laser-Assisted Machining of Fused Silica Using Response Surface Methodology
Source abstract
Abstract
Fused silica is difficult to machine using conventional machining methods mainly owing to its high brittleness and strength. Laser-assisted machining (LAM) provides desirable process for machining of fused silica. It was necessary to find the optimal machining condition during the LAM process. In this study, the regression models of the surface roughness and cutting force have been developed using Response Surface Methodology (RSM). Multiresponse optimization and composite desirability method were used to determine the optimum machining parameters. The experimental confirmed that the percentage errors of the regression models were within the permissible limits. It was also found that the high value of pulse duty ratio of laser corresponding to a better machining performance in the LAM of fused silica.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced machining processes and optimization · Advanced Machining and Optimization Techniques · Laser Material Processing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Hawleyfedder RA, Stolz CJ, Menapace JA, Borden MR, Yu J, Runkel MJ, Feit MD (2004) NIF optical materials and fabrication technologies: an overview, proceedings of SPIE - the. Int Soc Opt Eng 5341:102–105
2. Zhou C, Zhang Q, He C, Li Y (2014) Function of liquid and tool wear in ultrasonic bound-abrasive polishing of fused silica with different polishing tools. Optik 125:4064–406810.1016/j.ijleo.2014.01.113 ↗
3. Ding H, Shin YC (2013) Improvement of machinability of Waspaloy via laser-assisted machining. Int J Adv Manuf Technol 64:475–48610.1007/s00170-012-4012-8 ↗
4. Rozzi JC, Pfefferkorn FE, Shin YC, Incropera FP (2000) Experimental evaluation of the laser assisted machining of silicon nitride ceramics. J Manuf Sci E T ASME 122:666–67010.1115/1.1286556 ↗
5. Lei S, Shin YC, Incropera FP (2001) Experimental investigation of thermo-mechanical characteristics in laser-assisted machining of silicon nitride ceramics. J Manuf Sci E T ASME 123:639–64610.1115/1.1380382 ↗
6. Rebro PA, Shin YC, Incropera FP (2004) Design of operating conditions for crackfree laser-assisted machining of mullite. Int J Mach Tools Manuf 44:677–69410.1016/j.ijmachtools.2004.02.011 ↗
7. Pfefferkorn FE, Shin YC, Tian Y, Incropera FP (2004) Laser-assisted machining of magnesia-partially-stabilized zirconia. J Manuf Sci Eng 126:42–5110.1115/1.1644542 ↗
8. Kim J, Lee S, Suh J (2011) Characteristics of laser assisted machining for silicon nitride ceramic according to machining parameters. J Mech Sci Technol 25:995–100110.1007/s12206-011-0201-x ↗
9. Roostaei H, Movahhedy MR (2016) Analysis of heat transfer in laser assisted machining of slip cast fused silica ceramics. Procedia CIRP 46:571–57410.1016/j.procir.2016.04.068 ↗
10. Anderson M, Patwa R, Shin YC (2006) Laser-assisted machining of Inconel 718 with an economic analysis. Int J Mach Tool Manu 46:1879–189110.1016/j.ijmachtools.2005.11.005 ↗
11. Zhao F, Bernstein WZ, Naik G, Cheng GJ (2010) Environmental assessment of laser assisted manufacturing: case studies on laser shock peening and laser assisted turning. J Clean Prod 18:1311–131910.1016/j.jclepro.2010.04.019 ↗
12. Anderson MC, Shin YC (2006) Laser-assisted machining of an austenitic stainless steel: P550. Proc Inst Mech Eng B J Eng Manuf 220:2055–206710.1243/09544054JEM562 ↗
13. Wang Y, Yang LJ, Wang NJ (2002) An investigation of laser-assisted machining of Al2O3 particle reinforced aluminum matrix composite. J Mater Process Technol 129:268–27210.1016/S0924-0136(02)00616-7 ↗
14. Bejjani R, Shi B, Attia H, Balazinski M (2011) Laser assisted turning of titanium metal matrix composite. CIRP Ann Manuf Technol 60:61–6410.1016/j.cirp.2011.03.086 ↗
15. Przestacki D (2014) Conventional and laser assisted machining of composite A359/20SiCp. Procedia CIRP 14:229–23310.1016/j.procir.2014.03.029 ↗
16. Makadia AJ, Nanavati JI (2013) Optimisation of machining parameters for turning operations based on response surface methodology. Measurement 46:1521–152910.1016/j.measurement.2012.11.026 ↗
17. Chang C, Kuo C (2007) Evaluation of surface roughness in laser-assisted machining of aluminum oxide ceramics with Taguchi method. Int J Mach Tools Manuf 47:141–14710.1016/j.ijmachtools.2006.02.009 ↗
18. Kong X, Yang L, Zhang H, Chi G, Wang Y (2016) Optimization of surface roughness in laser-assisted machining of metal matrix composites using Taguchi method. Int J Adv Manuf Technol 85(1–14):365–37910.1007/s00170-015-7928-y ↗
19. Attia H, Tavakoli S, Vargas R, Thomson V (2010) Laser-assisted high-speed finish turning of superalloy Inconel 718 under dry conditions. CIRP Ann Manuf Technol 59:83–8810.1016/j.cirp.2010.03.093 ↗
20. Przestacki D, Szymanski P, Wojciechowski S (2016) Formation of surface layer in metal matrix composite A359/20SiCP during laser assisted turning. Compos A: Appl Sci Manuf 91:370–37910.1016/j.compositesa.2016.10.026 ↗
21. Venkatesan K, Ramanujam R (2016) Statistical approach for optimization of influencing parameters in laser assisted machining (LAM) of Inconel alloy. Measurement 89:97–10810.1016/j.measurement.2016.04.021 ↗
22. Kim D, Lee C (2014) A study of cutting force and preheating-temperature prediction for laser-assisted milling of Inconel 718 and AISI 1045 steel. Int J Heat Mass Transf 71:264–27410.1016/j.ijheatmasstransfer.2013.12.021 ↗
23. Masood SH, Armitage K, Brandt M (2011) An experimental study of laser-assisted machining of hard-to-wear white cast iron. Int J Mach Tools Manuf 51:450–45610.1016/j.ijmachtools.2011.02.001 ↗
24. Sun S, Harris J, Brt M (2010) Parametric investigation of laser-assisted machining of commercially pure titanium. Adv Eng Mater 10:565–57210.1002/adem.200700349 ↗
25. Rahman Rashid RA, Sun S, Wang G, Dargusch MS (2012) An investigation of cutting forces and cutting temperatures during laser-assisted machining of the Ti–6Cr–5Mo–5V–4Al beta titanium alloy. Int J Mach Tools Manuf 63:58–6910.1016/j.ijmachtools.2012.06.004 ↗
26. Venkatesan K, Ramanujam R, Kuppan P (2016) Parametric modeling and optimization of laser scanning parameters during laser assisted machining of Inconel 718. Opt Laser Technol 78:10–1810.1016/j.optlastec.2015.09.021 ↗
27. Kilickap E (2010) Modeling and optimization of burr height in drilling of Al-7075 using Taguchi method and response surface methodology. Int J Adv Manuf Technol 49:911–92310.1007/s00170-009-2469-x ↗
28. Aggarwal A, Singh H, Kumar P, Singh M (2008) Optimizing power consumption for CNC turned parts using response surface methodology and Taguchi's technique—a comparative analysis. J Mater Process Technol 200:373–38410.1016/j.jmatprotec.2007.09.041 ↗
29. Venkatesan K, Ramanujam R, Kuppan P (2014) Laser assisted machining of difficult to cut materials: research opportunities and future directions - a comprehensive review. Procedia Eng 97:1626–163610.1016/j.proeng.2014.12.313 ↗
30. Song H, Dan J, Chen X, Xiao J, Xu J (2018) Experimental investigation of machinability in laser-assisted machining of fused silica. Int J Adv Manuf Technol 97:267–27810.1007/s00170-018-1917-x ↗
31. Song H, Dan J, Li J, Du J, Xiao J, Xu J (2019) Experimental study on the cutting force during laser-assisted machining of fused silica based on the Taguchi method and response surface methodology. J Manuf Process 38:9–2010.1016/j.jmapro.2018.12.038 ↗
32. Box GEP, Wilson KB (1951) On the experimental attainment of optimum conditions. J R Stat Soc 13:1–4510.1111/j.2517-6161.1951.tb00067.x ↗
33. Yildiz G, Tunali S (2008) Response surface methodology based simulation optimization of a CONWIP controlled dual resource constrained system. Int J Adv Manuf Technol 36:1051–106010.1007/s00170-006-0920-9 ↗
34. Gopalakannan S, Senthilvelan T (2013) Application of response surface method on machining of Al?SiC nano-composites. Measurement 46:2705–271510.1016/j.measurement.2013.04.036 ↗
35. Sar Kaya M, Ll AG (2014) Taguchi design and response surface methodology based analysis of machining parameters in CNC turning under MQL. J Clean Prod 65:604–61610.1016/j.jclepro.2013.08.040 ↗
36. Lei S, Pfefferkorn F (2007) A review on thermally assisted machining: ASME 2007 International Manufacturing Science and Engineering Conference, pp. 325–336
37. Derringer G (1980) Simultaneous optimization of several response variables. J Qual Technol 12:214–21910.1080/00224065.1980.11980968 ↗
38. Natarajan U, Periyanan P, Yang SH (2011) Multiple-response optimization for micro-endmilling process using response surface methodology. Int J Adv Manuf Technol 56:177–18510.1007/s00170-011-3156-2 ↗