Effect of glass powder on the friction performance of automotive brake lining materials
Source abstract
Abstract
In this study, bronze-based brake linings containing 0-8 wt% glass powder were manufactured by a hot pressing process and tribological properties of produced samples were investigated using a Chase-type friction tester. The hardness and density of the samples were also determined. The microstructures and friction surfaces of the samples were examined using scanning electron microscopy (SEM). As a result, it was dermined that the sample that was reinforced with 8 wt% glass powder has exhibited the best wear behavior. Furthermore, a reduction in the friction coefficient of all the samples with increasing friction surface temperature was observed. The results have showed that friction coefficient stability of the brake lining samples could be improved with the increasing content of glass powder.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Brake Systems and Friction Analysis · Tribology and Wear Analysis · Railway Engineering and Dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Program of Machinery, Vocational School of Technical Sciences at Mersin Tarsus Organized Industrial Zone, Tarsus University, Mersin, Turkey
Automotive Engineering, Faculty of Technology, Gazi University, Ankara, Turkey
References (32)
Show source-provided references
1. P. Filip, L. Kovarik, M.A. Wright, In: “Proceedings of 15th Annual SAE Brake Colloquium”, SAE, Warrendale, PA, 1997, p. 41-61.
2. M. Eriksson, S. Jacobson, Tribology International, 33 (2000) 817.10.1016/S0301-679X(00)00127-4 ↗
3. Y. Han, X. Tian, Y. Yin, Tribology Transactions, 51 (2008) 779.10.1080/10402000802011778 ↗
4. J. Bijwe, Nidhi, N. Majumdar, B.K. Satapathy, Wear, 259 (2005) 1068.10.1016/j.wear.2005.01.011 ↗
5. A. E. Anderson, in: ASM Handbook (Vol.7 Powder metallurgy), ASM International, 1984 p. 569-577.
6. J.A.L.E. Junior, F.E. Arrieche, L. Schaeffer, Materials Research, 11 (2008) 269.10.1590/S1516-14392008000300007 ↗
7. I. N. Popescu, C. Ghiţă, V. Bratu, G. P. Navarro, Applied Surface Science, 285 (2013) 72.10.1016/j.apsusc.2013.08.007 ↗
8. C. Shi, Y. Wu, C. Riefler, H. Wang, Cement Concrete Res., 35 (2015) 987.10.1016/j.cemconres.2004.05.015 ↗
9. P. Turgut, KSCE Journal of Civil Engineering 17 (2013) 1425.10.1007/s12205-013-0280-6 ↗
10. I.B. Topcu, M. Canbaz, Cem Concr Res., 34 (2004) 267.10.1016/j.cemconres.2003.07.003 ↗
11. M. Boz, A. Kurt, Tribology International, 40 (2007) 1161.10.1016/j.triboint.2006.12.004 ↗
12. M. Boz, A. Kurt, Metallofizika i Noveishie Tekhnologii, 33 (2011) 389.
13. M. Boz, A. Kurt, Journal of Materials Science and Technology, 23 (2007) 843.
14. P. Yao, H. Sheng, X. Xiong, B. Huang, Transactions of Nonferrous Metals Society of China, 17 (2007) 99.10.1016/S1003-6326(07)60055-7 ↗
15. A.A.S. Ghazi, K. Chandra, Misra P.S. Misra, Materials Characterization & Engineering, 10 (2011) 1205.10.4236/jmmce.2011.1013093 ↗
16. T.F.J. Quinn, ASLE Transactions 10 (1967) 158.10.1080/05698196708972175 ↗
17. A. Sellami, M. Kchaou, R. Elleuch, A. Cristol, Y. Desplanques, Materials and Design, 59 (2014) 84.10.1016/j.matdes.2014.02.025 ↗
18. F. Okay, S. Islak, Science of Sintering, 54 (2022) 125.10.2298/SOS2202125O ↗
19. A. Baradeswaran, A.E. Perumal, Composites Part B: Engineering, 54 (2013) 146.10.1016/j.compositesb.2013.05.012 ↗
20. W. Osterle, I. Urban, Wear, 257 (2004) 215.10.1016/j.wear.2003.12.017 ↗
21. K.H. Cho, H. Jang, Y.S. Hong, S.J. Kim, R.H. Basch, J.W. Fash, K.H. Cho, J.H. Hong, Wear 264 (2008) 291.10.1016/j.wear.2007.03.018 ↗
22. S.B.K. Abadi A. Khavandi, Y. Kharazi, Appl Compos Mater., 17 (2010) 151.10.1007/s10443-009-9115-5 ↗
23. G.P. Ostermeyer, M. Muller, Journal of Automobile Engineering, 222 (2008) 1167.10.1243/09544070JAUTO595 ↗
24. A. Wirth, R. Whitaker, S. Turner, G. Fixter, Journal of Electron Spectroscopy and Related Phenomena 68 (1994) 675.10.1016/0368-2048(94)80031-6 ↗
25. M. Boz, A. Kurt, JESTECH., 9 (2006) 79.
26. D. Tabor, Macroscopic and Microscopic Processes, 220 (1996), 3.
27. M. Gürü, H. Yalcin, Malzeme Bilgisi, Palme Yayıncılık, Ankara, 2007. (in Turkish)
28. N.S.M. El-Tayep, K.W. Liew, Wear 266 (2009) 275.10.1016/j.wear.2008.07.003 ↗
29. Y. Kaplan, S. Aksöz, H. Ada, E. İnce, S. Özsoy, Science of Sintering, 52 (2020) 445.10.2298/SOS2004445K ↗
30. M. Eriksson, F. Bergman, S. Jacobson, Wear 232 (1999) 163.10.1016/S0043-1648(99)00141-6 ↗
31. S.S. Kim, H.J. Hwang, M.W. Shin, H. Jang, Wear 271 (2011) 1194.10.1016/j.wear.2011.05.037 ↗
32. M. Kchaou, A. Sellami, R. Elleuch, H. Singh, Materials and Design 52 (2013) 533.10.1016/j.matdes.2013.05.015 ↗