Mechanical properties of biomass-derived silica nanoparticles reinforced PMMA composite material
Source abstract
Abstract
Rice husk was used to produce silica particles, which were then used to reinforce the polymer matrix. The synthesized SiO2 particles were characterized using X-ray diffraction, Fourier transforms infrared spectroscopy (FTIR) and scanning electron microscopy with EDS. In a PMMA matrix, prepared SiO2 particles in amounts of 1, 3, and 5 wt.% were used as reinforcing agents. The goal of this research was to see if SiO2 particles had any effect on the mechanical properties of polymer composite materials. The morphology of the composites was examined using a field emission scanning electron microscope (FE-SEM). Vickers microindentation hardness and impact testing were used to determine the mechanical properties of the obtained composites. The indentation creep?s behavior of a polymethylmetacrylate (PMMA) composite material with varying amounts of nanoparticles (SiO2) was investigated and analyzed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · Natural Fiber Reinforced Composites · Nanocomposite Films for Food Packaging
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
University of Belgrade, Department of Chemical Dynamics and Permanent Education, „VINČA" Institute of Nuclear Sciences - National Institute of thе Republic of Serbia, Belgrade, Serbia
University of Belgrade, Institute of Chemistry, Technology and Metallurgy, National Institute of the Republic of Serbia, Belgrade, Serbia
Innovation Centre of Faculty of Technology and Metallurgy in Belgrade, Belgrade, Serbia
University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia
Funding
Ministry of Education, Science and Technological Development of the Republic of Serbia
References (39)
Show source-provided references
1. S. Choudhary, R. J. Sengwa, J. Appl. Polym. Sci. 132(3) (2015) 41311.10.1002/app.41311 ↗
2. S. Rattan, P. Singhal, A. L. Verma, Polym. Eng. Sci. 53(10) (2013) 2045-2052.10.1002/pen.23466 ↗
3. George Odian, Principles of Polymerization, John Wiley & Sons, Inc., Hoboken, NJ, USA, n.d., pp. 619-728.
4. V. Malisic, N. Tomic, M. Vuksanovic, B. Balanc, Z. Stevic, A. Marinkovic, R. Jancic-Heinemann, S. Putic, Sci. Sinter. 52(4) (2020) 457-467.10.2298/SOS2004457M ↗
5. S. Perisic, M. Vuksanovic, M. Petrovic, A. Radisavljevic, A. Grujic, R. Jancic-Heinemann, V. Radojevic, Sci. Sinter. 51(1) (2019) 115-124.10.2298/SOS1901115P ↗
6. P. Meneghetti, S. Qutubuddin, A. Webber, Electrochim. Acta 49(27) (2004) 4923-4931.10.1016/j.electacta.2004.06.023 ↗
7. M. Sahebi, M. M. Hanafi, A. Siti Nor Akmar, M. Y. Rafii, P. Azizi, F. F. Tengoua, J. Nurul Mayzaitul Azwa, M. Shabanimofrad, Biomed Res. Int. 2015 (2015) 1-16.10.1155/2015/396010 ↗
8. P. Hammer, F. C. dos Santos, B. M. Cerrutti, S. H. Pulcinelli, C. V. Santilli, Prog. Org. Coatings 76(4) (2013) 601-608.10.1016/j.porgcoat.2012.11.015 ↗
9. V. A. Soloukhin, W. Posthumus, J. C. Brokken-Zijp, J. Loos, G. de With, Polymer (Guildf). 43(23) (2002) 6169-6181.10.1016/S0032-3861(02)00542-6 ↗
10. S. Kim, C. A. Wilkie, Polym. Adv. Technol. 19(6) (2008) 496-506.10.1002/pat.1089 ↗
11. C.-C. Chang, W.-C. Chen, Chem. Mater. 14(10) (2002) 4242-428.10.1021/cm0202310 ↗
12. Y. Sun, Z. Zhang, K.-S. Moon, C. P. Wong, J. Polym. Sci. Part B Polym. Phys. 42(21) (2004) 3849-3858.10.1002/polb.20251 ↗
13. J.-D. Cho, H.-T. Ju, Y.-S. Park, J.-W. Hong, Macromol. Mater. Eng. 291(9) (2006) 1155-1163.10.1002/mame.200600124 ↗
14. X. Li, X. Li, G. Wang, Mater. Lett. 60(28) (2006) 3342-3345.10.1016/j.matlet.2006.03.085 ↗
15. S. Das, A. K. Banthia, B. Adhikari, Desalination 197(1-3) (2006) 106-116.10.1016/j.desal.2005.12.019 ↗
16. Y.-S. Ye, J. Rick, B.-J. Hwang, Polymers (Basel). 4(2) (2012) 913-963.10.3390/polym4020913 ↗
17. X. J. Xiang, J. W. Qian, W. Y. Yang, M. H. Fang, X. Q. Qian, J. Appl. Polym. Sci. 100(6) (2006) 4333-4337.10.1002/app.23306 ↗
18. Y. Su, React. Funct. Polym. 66(9) (2006) 967-973.10.1016/j.reactfunctpolym.2006.01.021 ↗
19. H. Varela-Rizo, M. Weisenberger, D. R. Bortz, I. Martin-Gullon, Compos. Sci. Technol. 70(7) (2010) 1189-1195.10.1016/j.compscitech.2010.03.005 ↗
20. H.G.M. Doan, P. Mertiny, Materials (Basel). 13(20) (2020) 4637.10.3390/ma13204637 ↗
21. X. Hao, H. Zhou, Y. Xie, Z. Xiao, H. Wang, Q. Wang, Polym. Compos. 40(4) (2019) 1576-1584.10.1002/pc.24901 ↗
22. H. Varela-Rizo, M. Weisenberger, D. R. Bortz, I. Martin-Gullon, Compos. Sci. Technol. 70(7) (2010) 1189-1195.10.1016/j.compscitech.2010.03.005 ↗
23. G. A. Lazouzi, M. M. Vuksanović, N. Tomić, M. Petrović, P. Spasojević, V. Radojević, R. Jančić Heinemann, Polym. Compos. 40(5) (2019) 1691-701.10.1002/pc.24952 ↗
24. G. Lazouzi, M. M. Vuksanović, N. Z. Tomić, M. Mitrić, M. Petrović, V. Radojević, R. J. Heinemann, Ceram. Int. 44(7) (2018) 7442-7449.10.1016/j.ceramint.2018.01.083 ↗
25. O. Starkova, J. Yang, Z. Zhang, Compos. Sci. Technol. 67(13) (2007) 2691-2698.10.1016/j.compscitech.2007.02.014 ↗
26. M. L. Oyen, Acta Mater. 55(11) (2007) 3633-3639.10.1016/j.actamat.2006.12.031 ↗
27. P. Christöfl, C. Czibula, M. Berer, G. Oreski, C. Teichert, G. Pinter, Polym. Test. 93 (2021) 106978.10.1016/j.polymertesting.2020.106978 ↗
28. L. Lv, H. Lin, T. Jin, Polym. Test. 93 (2021) 106991.10.1016/j.polymertesting.2020.106991 ↗
29. ASTM International, West Conshohocken, PA (2016). 10.1520/E0384-16.
30. S. P. M., M.F. Ashby, Mater. Sci. Technol. 8(7) (1992) 594-601.10.1179/mst.1992.8.7.594 ↗
31. I. O. Mladenović, N. D. Nikolić, J. S. Lamovec, D. Vasiljević-Radović, V. Radojević, Metals (Basel). 11(1) (2021) 111.10.3390/met11010111 ↗
32. N. Z. Tomić, A. D. Marinković, B. Balanč, V. Obradović, V. Pavlović, V. Manojlović, M. M. Vuksanović, Iran. Polym. J. 30 (2021) 319-330.10.1007/s13726-020-00894-6 ↗
33. N. Yan, F. Wang, H. Zhong, Y. Li, Y. Wang, L. Hu, Q. Chen, Sci. Rep. 3(1) (2013) 1568.10.1038/srep01568 ↗
34. S. H. Kwon, I. H. Park, C. M. Vu, H. J. Choi, J. Taiwan Inst. Chem. Eng. 95 (2019) 432-437.10.1016/j.jtice.2018.08.018 ↗
35. S. Ahmad, S. Ahmad, S.A. Agnihotry, Bull. Mater. Sci. 30(1) (2007) 31-35.10.1007/s12034-007-0006-9 ↗
36. B. Walser, O. D. Sherby, Scr. Metall. 16(2) (1982) 213-219.10.1016/0036-9748(82)90389-1 ↗
37. S. Farhat, M. Rekaby, R. Awad, SN Appl. Sci. 1(6) (2019) 546.10.1007/s42452-019-0559-4 ↗
38. S. A. Ben Hasan, M. M. Dimitrijević, A. Kojović, D. B. Stojanović, K. Obradović-DethURIČIĆ, R. M. Jančić Heinemann, R. Aleksić, J. Serbian Chem. Soc. 79(10) (2014) 1295-1307.
39. F. A. Alzarrug, M. M. Dimitrijević, R. M. Jančić Heinemann, V. Radojević, D. B. Stojanović, P. S. Uskoković, R. Aleksić, Mater. Des. 86 (2015) 575-581.10.1016/j.matdes.2015.07.069 ↗