Novel method for measurement of pipeline materials fracture resistance-examination on selective laser sintered cylindrical specimens
Source abstract
Abstract
This paper presents a part of development of a non-standard method for testing of cylindrical test specimens for measurement of fracture properties of pipeline materials. This method for testing of cylindrical structures working under pressure is based on determining of fracture mechanics parameters on SENT (Single Edge Notched Tension) specimens and new PRNT (Pipe Ring Notched Tension) specimens. In this work, both types of specimens required for this testing were manufactured from polyamide PA12 by using SLS (selective laser sintering) additive manufacturing method. Testing of the specimens is performed on the universal device for testing of mechanical properties of materials Shimadzu, AGS-X 100 kN. The tensile testing is accompanied by GOM Aramis 2M system, used for digital image correlation. By using these two systems, test results are obtained for ring-shaped and SENT specimens, including forces, displacements and fracture mechanics parameters CMOD (Crack Mouth Opening Displacement) and CTOD-?5 (Crack Tip Opening Displacement obtained by ?5 technique), as well as crack growth. Repeatability of this process, along with valid result consistency, represent the basis for further development of the new method, including the determining of energy-based fracture mechanics parameters: J integral and stress intensity factor.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Additive Manufacturing Materials and Processes · Industrial Vision Systems and Defect Detection
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Innovation Center of the Faculty of Mechanical Engineering, Belgrade, Serbia
University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia
University of Belgrade, Faculty of Mechanical Engineering, Belgrade, Serbia
State University of Novi Pazar, Novi Pazar, Serbia
Funding
Ministry of Education, Science and Technological Development of the Republic of Serbia
References (53)
Show source-provided references
1. H. Brömstrup, PE 100 Pipe Systems. Vulkan-Verlag GmbH, (2012).
2. L. Janson, Plastics Pipes for Water Supply and Sewage Disposal, vol. 4. Stockholm: Majornas CopyPrint AB, (2003).
3. G. Brescia, The changing World of the Chemical Industry and its impact on the Pipe Industry. Budapest, Hungary, (2008).
4. M. Hartmann, K. Kuhmann, Kunststoffe, 6 (2014) 76-79.10.17104/9783406658945-79 ↗
5. M. Hartmann, KRV Nachrichten, (2014) 15-17.
6. “ASTM E1820: Standard test method for measurement of fracture toughness, American Society for Testing and Materials.,” (2015).
7. “EN 10216-2 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties;,” (2002).
8. L. Gajdos, M. Sperl, Applied Fracture Mechanics, InTech Publishing, 10 (2012) 283-310.
9. J. M. Koo, S. Park, C. S. Seok, Nuclear Engineering and Design, 77 (2013) 198-204.10.1016/j.nucengdes.2013.03.001 ↗
10. Y. Zhang, P.-Y. ben Jar, Jurnal Materials and Design, 77 (2015) 72-82.10.1016/j.matdes.2015.04.011 ↗
11. G. Mahajan, S. Saxena, A. Mohanty, Fatigue and Fracture of Engineering Materials and Structures, 39 (2016) 859-865.10.1111/ffe.12400 ↗
12. M. Bergant, A. Yawny, J. Perez Ipiña, Engineering Fracture Mechanics, 164 (2016) 1-18.10.1016/j.engfracmech.2016.07.008 ↗
13. M. Kiraly, D. M. Antok, L. Horvath, Z. Hozer, Jurnal Nuclear Engineering and Technology, 50 (2018) 425-431.10.1016/j.net.2018.01.002 ↗
14. N. Gubeljak, A. Likeb, Y. Matvienko, Procedia Materials Science,3 (2014) 1934-1940.10.1016/j.mspro.2014.06.312 ↗
15. Y. G. Matvienko, N. Gubeljak, Model for Determination of crack-resistance of the pipes, Patent No. RU 2564696 C, (in Russian), (2015).
16. D. Damjanović, D. Kozak, N. Gubeljak, Engineering Fracture Mechanics,205 (2019) 347-358.10.1016/j.engfracmech.2018.10.016 ↗
17. D. Damjanovic, D. Kozak, I. Gelo, N. Gubeljak, Theoretical and Applied Fracture Mechanics, 103 (2019) 102286.10.1016/j.tafmec.2019.102286 ↗
18. W. Musraty, B. Medjo, P. Štefane, Z. Radosavljević, Z. Burzić, M. Rakin, Chemical Industry, 72 (2018) 39-46.10.2298/HEMIND170530014M ↗
19. W. Musraty, B. Medjo, N. Gubeljak, A. Likeb, I. Cvijović-Alagić, A. Sedmak, M. Rakin, Engineering Fracture Mechanics,175 (2017) 247-261.10.1016/j.engfracmech.2017.01.022 ↗
20. B. Medjo, M. Rakin, N. Gubeljak, Y. Matvienko, M. Arsić, Ž. Šarkoćević, A. Sedmak, Engineering Failure Analysis, 58 (2015) 429-440.10.1016/j.engfailanal.2015.05.015 ↗
21. A. Likeb, N. Gubeljak, Y. Matvienko, Fatigue and Fracture of Engineering Materials and Structures, 37 (2014) 1319-1329.10.1111/ffe.12173 ↗
22. B. Medjo, M. Arsić, M. Mladenović, Z. Savić, V. Grabulov, Z. Radosavljević, M. Rakin, Structural Integrity and Life, 20 (2020) 82-86.
23. J. P. Kruth, G. Levy, F. Klocke, T. H. C. Childs, CIRP Annals - Manufacturing Technology, 56 (2007) 730-759.10.1016/j.cirp.2007.10.004 ↗
24. S. Kumar, JOM 55 (2003) 43-47.10.1007/s11837-003-0175-y ↗
25. N. Hopkinson, R. J. M. Hague, P. M. Dickens, Rapid manufacturing: an industrial revolution for the digital age. John Wiley, (2005).10.1002/0470033991 ↗
26. J. Stašić, D. Božić, Science of Sintering, 52, no.1 (202) 15-23.10.2298/SOS2001015S ↗
27. R. D. Goodridge, M. L. Shofner, R. J.M. Hague, M. McClelland, M. R. Schlea, R. B. Johnson, C. J. Tuck, Polymer Testing, 30, no. 1 (2011) 94-100.10.1016/j.polymertesting.2010.10.011 ↗
28. M. Schmid, A. Amado, K. Wegener, AIP Conference Proceedings, 1664 (2015).
29. J. R. C. Dizon, A. H. Espera, Q. Chen, R. C. Advincula, Additive Manufacturing, 20 (2018) 44-67.10.1016/j.addma.2017.12.002 ↗
30. S. Rosso, R. Meneghello, L. Biasetto, L. Grigolato, G. Concheri, G. Savio, Additive Manufacturing, 36 (2020) 101713.10.1016/j.addma.2020.101713 ↗
31. D. I. Stoia, E. Linul, L. Marsavina, Materials, 12, 6 (2019) 871.10.3390/ma12060871 ↗
32. G. V. Salmoria, J. L. Leite, L. F. Vieira, A. T. N. Pires, C. R. M. Roesler, Polymer Testing, 31, 3 (2012) 411-416.10.1016/j.polymertesting.2011.12.006 ↗
33. E. C. Hofland, I. Baran, D. A. Wismeijer, Advances in Materials Science and Engineering, 2017 (2017) 4953173.10.1155/2017/4953173 ↗
34. W. Cooke, R. A. Tomlinson, R. Burguete, D. Johns, G. Vanard, Rapid Prototyping Journal, 17, 4 (2011) 269-279.10.1108/13552541111138397 ↗
35. G. Berti, L. D’Angelo, A. Gatto, L. Iuliano, Rapid Prototyping Journal, 16, 2 (2010) 124-129.10.1108/13552541011025843 ↗
36. W. Zhang, R. Melcher, N. Travitzky, R. K. Bordia, P. Greil, Advanced Engineering Materials, 11, 12 (2009) 1039-1043.
37. D. I. Stoia, L. Marsavina, Procedia Structural Integrity, 18 (2019) 163-169.10.1016/j.prostr.2019.08.150 ↗
38. A. J. Cano, A. Salazar, J. Rodríguez, Engineering Fracture Mechanics, 203 (2018) 66-80.10.1016/j.engfracmech.2018.07.035 ↗
39. T. Brugo, R. Palazzetti, S. Ciric-Kostic, X. T. Yan, G. Minak, A. Zucchelli, Polymer Testing 50 (2022) 301-308.10.1016/j.polymertesting.2016.01.024 ↗
40. M. Messiha, B. Gerets, J. Heimink, A. Frank, F. Arbeiter, K. Engelsing, Polymer Testing, 86 (2020) 227-244.10.1016/j.polymertesting.2020.106468 ↗
41. M. Messiha, A. Frank, I. Berger, J. H. Evonik, Proceedings of the 19th Plastic Pipes Conference (2018).
42. A. A. M. Damanhuri, A. Hariri, S. A. Ghani, M. S. S. Mustafa, S. G. Herawan, N. A. Paiman, International Journal of Environmental Science and Development, 12, 11 (2021) 339-345.10.18178/ijesd.2021.12.11.1359 ↗
43. S. Weinmann, C. Bonten, AIP Conference Proceedings, 2289 (2020).
44. A. A. M. Damanhuri, A. S. A Subki, A. Hariri, B. T. Tee, M. H.F.M Fauadi, M. S.F. Hussin, M. S.S. Mustafa, IOP Conference Series: Earth and Environmental Science, 373, no.1. (2019).10.1088/1755-1315/373/1/012014 ↗
45. M. Travica, N. Mitrović, G. Mladenović, A. Milovanović, N. Milošević, M. Milošević, A. Petrović, “Tool for testing ring-shaped specimens,” National patent No. 1629, (2019).
46. M. Milošević, N. Milošević, S. Sedmak, U. Tatić, N. Mitrović, Sergej Hloch, Radomir Jovičić , Tehnicki Vjesnik, 23, 1 (2016) 19-24.
47. M. Milošević, N. Mitrović, R. Jovičić, A. Sedmak, T. Maneski, A. Petrović, A. Tarek, Chem. Listy, 106 (2011) 485-488.
48. M. Milošević, V. Miletić, T. Maneski, Chem. Listy, 105 (2011) 751-753.
49. M. Milošević, N. Mitrović, A. Sedmak, 15th IEEE International Conference on Intelligent Engineering Systems, (2011) 421-425.10.1109/INES.2011.5954784 ↗
50. N. Mitrović, M. Milošević, N. Momčilović, A. Petrović, Ž. Mišković, A. Sedmak, P. Popović, Key Engineering Materials, 586 (2014) 214-217.
51. N. Mitrović, M. Milošević, N. Momčilović, A. Petrović, A. Sedmak, T. Maneski, M. Zrilić, Chemicke Listy, 106, no. SUPPL. 3 (2012) 402-405.
52. M. Milošević, Procedia Engineering, 149 (2016) 313-320.10.1016/j.proeng.2016.06.672 ↗
53. P. L. Reu, B. R. Rogillio, G. W. Wellman, OSTI report SAND2007-0156C, United States, (2007) 555-556.10.1007/978-1-4020-6239-1_275 ↗