Influence of grinding and pressing of the powder 50.0 wt% Fe, 47.0 wt% BaTiO3 and 3.0 wt% TiO2 on morphology, microstructure and magnetic properties
Source abstract
Abstract
Mixing the powders Fe (50.0 wt%), BaTiO3 (47.0 wt%) and TiO2 (3.0wt%) provides a mixture consisting of a matrix of smaller particles BaTiO3 in which larger particles Fe and TiO2 were embedded. The powder grinding results in the crystal grains cracking, increase in both dislocations and internal microstrains, aggregates formation, decrease in the content of crystalline phases due to formation of amorphous and oxidation of Fe in its oxides. Crushing of Fe crystalline grains with increasing grinding time up to 110 min causes an increase in magnetization. With further increase in the grinding time up to 170 min, the magnetization decreases due to lowering of the Fe content, resulting from FeO formation. From 170 min to 220 min, the oxidation of FeO to Fe3O4 and Fe2O3 causes an increase in the magnetization. Annealing the pressed sample ground for 110 minutes from 270 to 400 ?C results in the structural relaxation and thus, the increase in magnetization of the cooled sample. In the temperature range of 400 to 620 ?C, by increasing the annealing temperature up to 440 ?C the magnetization of the cooled sample increases, reaches its maximum and hereafter decreases. This magnetization change is mainly due to sudden increase in the size of Fe crystal grains and oxidation of Fe to FeO.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Magnetic Properties of Alloys · Powder Metallurgy Techniques and Materials · Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
University of Kragujevac, Joint Laboratory for advanced Materials of SASA, Section for Amorphous Systems, Faculty of Technical Sciences, Čačak, Serbia
University of Belgrade, Innovative Centre of the Faculty of Chemistry, Belgrade, Serbia
Funding
Ministry of Education, Science and Technological Development of the Republic of Serbia
References (57)
Show source-provided references
1. J. Aarts, in: Jan Evetts (Ed.), Concise Encyclopedia of Magnetic and Superconducting Materials, Pergamon Press, Oxford, 1992, p. 704, hardcover, £ 140, ISBN 0-09- 034722-3, Advanced Materials. 5 (1993) 221-222.10.1002/adma.19930050317 ↗
2. J. F. Scott, Multiferroic memories, Nat. Mater. 6 (2007) 256-257.10.1038/nmat1868 ↗
3. C.-W. Nan, M.I. Bichurin, S. Dong, D. Viehland, G. Srinivasan, Multiferroic magnetoelectric composites: historical perspective, status, and future directions, J. Appl. Phys. 103 (2008) 31101.10.1063/1.2836410 ↗
4. K. F. Wang, J.-M. Liu, Z. F. Ren, Multiferroicity: the coupling between magnetic and polarization orders, Adv. Phys. 58 (2009) 321-448.10.1080/00018730902920554 ↗
5. R. C. Pullar, Hexagonal ferrites: a review of the synthesis, properties and applications of hexaferrite ceramics, Prog. Mater. Sci. 57 (2012) 1191-1334.10.1016/j.pmatsci.2012.04.001 ↗
6. J. Seidel, L.W. Martin, Q. He, Q. Zhan, Y.H. Chu, A. Rother, M.E. Hawkridge, P. Maksymovych, P. Yu, M. Gajek, N. Balke, S.V. Kalinin, S. Gemming, F. Wang, G. Catalan, J.F. Scott, N.A. Spaldin, J. Orenstein, R. Ramesh, Conduction at domain walls in oxide multiferroics, Nat. Mater. 8 (2009) 229-234.10.1038/nmat2373 ↗
7. M. Shandilya, R. Rai, K. Sharma, D. Thakur, Effect of addition of zinc ferrite on dielectric and magnetic properties of (Ba,Ca)TiO3 ceramics, Integrated Ferroelectrics Int. J. 185 (2017) 147-154.10.1080/10584587.2017.1370350 ↗
8. M. Shandilya, R. Verma, Impedance modulated dielectric and magnetic properties of BCT-NF multiferroic composite, J. Magn. Magn Mater. 527 (2021) 167782.10.1016/j.jmmm.2021.167782 ↗
9. Y. Yamasaki, S. Miyasaka, Y. Kaneko, J.P. He, T. Arima, Y. Tokura, Magnetic reversal of the ferroelectric polarization in a multiferroic spinel oxide, Phys. Rev. Lett. 96 (2006) 207204.10.1103/PhysRevLett.96.207204 ↗
10. A. Haque, A.R. Mahbub, M. Abdullah-Al Mamun, M. Reaz, K. Ghosh, Fabrication and thickness-dependent magnetic studies of tunable multiferroic heterostructures (CFO/LSMO/Lao), Appl. Phys. Mater. Sci. Process 125 (2019) 1-9.10.1007/s00339-019-2620-y ↗
11. M. Radwan, M.M. Rashad, M.M. Hessien, Synthesis and characterization of barium hexaferrite nanoparticles, J. Mater. Process. Technol. 181 (2007) 106-109.10.1016/j.jmatprotec.2006.03.015 ↗
12. K. Martirosyan, E. Galstyan, S.M. Hossain, Y.-J. Wang, D. Litvinov, Barium hexaferrite nanoparticles: synthesis and magnetic properties, Mater. Sci. Eng., B 176 (2011) 8-13.10.1016/j.mseb.2010.08.005 ↗
13. V. V. Soman, V.M. Nanoti, D.K. Kulkarni, Dielectric and magnetic properties of Mg-Ti substituted barium hexaferrite, Ceram. Int. 39 (2013) 5713-5723.10.1016/j.ceramint.2012.12.089 ↗
14. P. Salcedo-Abraira, E. Mor´an, M.E. Villafuerte-Castrej´on, R. Vivar-Ocampo, L. Pardo, Ba0.9Ca0.1TiO3: microwave-assisted hydrothermal synthesis and piezoelectric properties, Adv. Appl. Ceram. 117 (2018) 72-77.10.1080/17436753.2017.1385991 ↗
15. M. Reaz, A. Haque, K. Ghosh, Synthesis, characterization, and optimization of magnetoelectric BaTiO3 -iron oxide core-shell nanoparticles, Nanomaterials 10 (2020) 563.10.3390/nano10030563 ↗
16. V. Paunovic, V. Mitic, M. Djordjevic, M. Marjanovic, L. Kocic, Electrical characteristics of Er doped BaTiO3 ceramics, Science of Sintering, 49, 2 (2017) 129- 137.10.2298/SOS1702129P ↗
17. J. Ray Mal, P. Hing, Sol-gel derived Ba(Fe, Ti)O3 ferroelectric materials for infrared sensors, J. Appl. Phys. 88 (2000) 1008-1014.10.1063/1.373770 ↗
18. H. Nakayama, H. Katayama-Yoshida, Theoretical prediction of magnetic properties of Ba(Ti1-xMx)O3 (M=Sc,V,Cr,Mn,Fe,Co,Ni,Cu), Jpn. J. Appl. Phys. 40 (2001) L1355-L1358.10.1143/JJAP.40.L1355 ↗
19. Z. Durmus, A. Durmus, H. Kavas, Synthesis and characterization of structural and magnetic properties of graphene/hard ferrite nanocomposites as microwave-absorbing material, J. Mater. Sci. 50 (2015) 1201-1213.10.1007/s10853-014-8676-3 ↗
20. Jelena Živojinović, Darko Kosanović, Vladimir A. Blagojević, Vera P. Pavlović, Nenad Tadić, Branislav Vlahović, Vladimir B. Pavlović, Dielectric Properties of Mechanically Activated Strontium Titanate Ceramics, Science of Sintering, 54, 4 (2022) 401-414.
21. Branislav M. Ranđelović, Srđan Ribar, Vojislav V. Mitić, Bojana Marković, Hans Fecht, Branislav Vlahović, Artificial Neural Network Applied on Sintered BaTiO3- Ceramic Density, Science of Sintering, 54, 4 (2022) 425-438.10.2298/SOS2204425R ↗
22. S. Filipović, N. Obradović, Lj. Andjelković, D. Olćan, J. Petrović, M. Mitrović, V. Pavlović, D. Jeremić, B. Vlahović, A. Djordjević, Multiferroic heterostructure BaTiO3/ε-Fe2O3 composite obtained by in situ reaction, Science of Sintering, 53, 1 (2021) 1-8.10.2298/SOS2101001F ↗
23. Vesna Paunović, Zoran Prijić, Vojislav V. Mitić, Effect of Donor and Acceptor Dopants on the Microstructure and Dielectric Properties of Barium Titanate Based Ceramics, 54 (2022) 81-91.10.2298/SOS2201081P ↗
24. X. Gao, L. Li, J. Jian, H. Wang, M. Fan, J. Huang, X. Wang, H. Wang, Vertically Aligned Nanocomposite BaTiO3:YMnO3 Thin Films with Room Temperature Multiferroic Properties toward Nanoscale Memory Devices, ACS Appl. Nano Mater. 1 (2018) 2509-2514.10.1021/acsanm.8b00614 ↗
25. W. Zhang, M. Fan, L. Li, A. Chen, Q. Su, Q. Jia, J.L. MacManus-Driscoll, H. Wang, Heterointerface design and strain tuning in epitaxial BiFeO3 :CoFe2O4 nanocomposite films, Appl. Phys. Lett. 107 (2015) 212901.10.1063/1.4936157 ↗
26. M. Fan, W. Zhang, J. Jian, J. Huang, H. Wang, Strong perpendicular exchange bias in epitaxial La0.7 Sr0.3 MnO3 :LaFeO3 nanocomposite thin films, APL Mater. 4 (2016) 076105.10.1063/1.4958965 ↗
27. W. R. Zhang, A.P. Chen, J. Jian, Y.Y. Zhu, L. Chen, P. Lu, Q.X. Jia, J.L. MacManus- Driscoll, X.H. Zhang, H.Y. Wang, Strong perpendicular exchange bias in epitaxial La0.7Sr0.3MnO3:BiFeO3 nanocomposite films through vertical interfacial coupling, Nanoscale. 7 (2015) 13808-13815.10.1039/C5NR03231H ↗
28. B. Zhang, J. Huang, B.X. Rutherford, P. Lu, S. Misra, M. Kalaswad, Z. He, X. Gao, X. Sun, L. Li, H. Wang, Tunable, room-temperature multiferroic Fe-BaTiO3 vertically aligned nanocomposites with perpendicular magnetic anisotropy, Materials Today Nano, 11 (2020) 100083.10.1016/j.mtnano.2020.100083 ↗
29. M. Plazinic, M. Spasojevic, M. Lukovic, A. Maricic, M. Spasojevic, Effect of the mechano-chemical activation, pressing and sintering the powders of 70% Fe, 30% BaTiO3 on morphology, microstructure, magnetic and electrical properties, J. Optoelectron. Adv. Mater. 23 (2021) 383-396.
30. D. Kosanović, V. A. Blagojevi´c, A. Maričić, S. Aleksić, V. P. Pavlović, V. B. Pavlović, B. Vlahović, Influence of mechanical activation on functional properties of barium hexaferrite ceramics, Ceram. Int. 44, 6 (2018) 6666-6672.10.1016/j.ceramint.2018.01.078 ↗
31. B. Zhang, M. Fan, L. Li, J. Jian, J. Huang, H. Wang, M. Kalaswad, H. Wang, Tunable magnetic anisotropy of self-assembled Fe nanostructures within a La0.5 Sr0.5 FeO3 matrix, Appl. Phys. Lett. 112 (2018) 013104.10.1063/1.5008382 ↗
32. S. Misra, L. Li, J. Jian, J. Huang, X. Wang, D. Zemlyanov, J.W. Jang, F.H. Ribeiro, H. Wang, Tailorable Au Nanoparticles Embedded in Epitaxial TiO2 Thin Films for Tunable Optical Properties, ACS Appl. Mater. Interfaces. 10 (2018) 32895-32902.10.1021/acsami.8b12210 ↗
33. J. Huang, Z. Qi, L. Li, H. Wang, S. Xue, B. Zhang, X. Zhang, H. Wang, Selfassembled vertically aligned Ni nanopillars in CeO2 with anisotropic magnetic and transport properties for energy applications, Nanoscale. 10 (2018) 17182-17188.10.1039/C8NR05532G ↗
34. Q. Su, W. Zhang, P. Lu, S. Fang, F. Khatkhatay, J. Jian, L. Li, F. Chen, X. Zhang, J.L. Macmanus-Driscoll, A. Chen, Q. Jia, H. Wang, Self-Assembled Magnetic Metallic Nanopillars in Ceramic Matrix with Anisotropic Magnetic and Electrical Transport Properties, ACS Appl. Mater. Interfaces. 8 (2016) 20283-20291.10.1021/acsami.6b05999 ↗
35. J. Huang, L. Li, P. Lu, Z. Qi, X. Sun, X. Zhang, H. Wang, Self-assembled CoBaZrO3 nanocomposite thin films with ultra-fine vertically aligned Co nanopillars, Nanoscale. 9 (2017) 7970-7976.10.1039/C7NR01122A ↗
36. K.J. Choi, M. Biegalski, Y.L. Li, A. Sharan, J. Schubert, R. Uecker, P. Reiche, Y.B. Chen, X.Q. Pan, V. Gopalan, L.-Q. Chen, D.G. Schlom, C.B. Eom, Enhancement of ferroelectricity in strained BaTiO3 thin films-supplementary info, Science. 306 (2004) 1005-suppl.10.1126/science.1103218 ↗
37. L. Huang, Z. Chen, J.D. Wilson, S. Banerjee, R.D. Robinson, I.P. Herman, R. Laibowitz, S. O’Brien, Barium titanate nanocrystals and nanocrystal thin films: Synthesis, ferroelectricity, and dielectric properties, J. Appl. Phys. 100 (2006) 034316.10.1063/1.2218765 ↗
38. M. Dawber, K.M. Rabe, J.F. Scott, Physics of thin-film ferroelectric oxides, Rev. Mod. Phys. 77 (2005) 1083-1130.10.1103/RevModPhys.77.1083 ↗
39. V. N. Reddy, K. C. Babu Naidu, T. Subbarao, Structural, optical and ferroelectric properties of BaTiO3 ceramics, J. Ovonic Res. 12 (2016) 185-191.
40. V. Mishra, A. Sagdeo, V. Kumar, M.K. Warshi, H.M. Rai, S.K. Saxena, D.R. Roy, V. Mishra, R. Kumar, P.R. Sagdeo, Electronic and optical properties of BaTiO3 across tetragonal to cubic phase transition: An experimental and theoretical investigation, J. Appl. Phys. 122 (2017) 065105.10.1063/1.4997939 ↗
41. L.A. Wills, B.W. Wessels, D.S. Richeson, T.J. Marks, Epitaxial growth of BaTiO3 thin films by organometallic chemical vapor deposition, Appl. Phys. Lett. 60 (1992) 41-43.10.1063/1.107359 ↗
42. T. Woldu, B. Raneesh, P. Sreekanth, M. V. Ramana Reddy, R. Philip, N. Kalarikkal, Size dependent nonlinear optical absorption in BaTiO3 nanoparticles, Chem. Phys. Lett. 625 (2015) 58-63.10.1016/j.cplett.2015.02.020 ↗
43. Jin, L. Li, B. Zhang, H.Y.G. Lin, H. Wang, P.T. Lin, Monolithic Mid-Infrared Integrated Photonics Using Silicon-on-Epitaxial Barium Titanate 1 Thin Films, ACS Appl. Mater. Interfaces. 9 (2017) 21848-21855.10.1021/acsami.7b02681 ↗
44. C. Xiong, W.H.P. Pernice, J.H. Ngai, J.W. Reiner, D. Kumah, F.J. Walker, C.H. Ahn, H.X. Tang, Active silicon integrated nanophotonics: Ferroelectric BaTiO3 devices, Nano Lett. 14 (2014) 1419-1425.10.1021/nl404513p ↗
45. T. Jin, L. Li, B. Zhang, H.Y.G. Lin, H. Wang, P.T. Lin, Real-Time and Label-Free Chemical Sensor-on-a-chip using Monolithic Si-on-BaTiO3 Mid-Infrared waveguides, Sci. Rep. 7 (2017) 5836.10.1038/s41598-017-05711-4 ↗
46. T. Jin, L. Li, B. Zhang, H.-Y.G. Lin, H. Wang, P.T. Lin, Epitaxial Barium Titanate Thin Films for Mid-Infrared Photonic Circuits, in: Adv. Photonics 2017 (IPR, NOMA, Sensors, Networks, SPPCom, PS), OSA, Washington, D.C., 2017: p. ITh1A.5.10.1364/IPRSN.2017.ITh1A.5 ↗
47. W. A. Borders, A. Z. Pervaiz, S. Fukami, K. Y. Camsari, H. Ohno, S. Datta, Integer factorization using stochastic magnetic tunnel junctions, Nature. 573 (2019) 390-393.10.1038/s41586-019-1557-9 ↗
48. M. L. Schneider, C. A. Donnelly, S. E. Russek, B. Baek, M. R. Pufall, P. F. Hopkins, P. D. Dresselhaus, S. P. Benz, W. H. Rippard, Ultralow power artificial synapses using nanotextured magnetic josephson junctions, Sci. Adv. 4, 1 (2018) e1701329.10.1126/sciadv.1701329 ↗
49. Milica Spasojević, Milentije Luković, Suzana Arnaut, Ema Maričić, Miroslav Spasojević, The properties of mechanically activated powders consisting of 17.0 wt% Fe2O3, 4.4 wt% MnCO3, 3.6 wt% ZnO and 75.0 wt% BaTiO3, Materials Chemistry and Physics, 283 (2022) 125987.10.1016/j.matchemphys.2022.125987 ↗
50. K. Yue, Y. Liu, R.K. Lake, A.C. Parker, A brain-plausible neuromorphic on-the-fly learning system implemented with magnetic domain wall analog memristors, Sci. Adv. 5 (2019) 1-10.10.1126/sciadv.aau8170 ↗
51. D. Kosanović, N. Obradović, V.P. Pavlović, S. Marković, A. Maričić, G. Rasić, B. Vlahović, V.B. Pavlović, M.M. Ristić, The influence of mechanical activation on the morphological changes of Fe/BaTiO3 powder, Mater. Sci. Eng. B, 212 (2016) 89-95.10.1016/j.mseb.2016.07.016 ↗
52. A. Rani, J. Kolte, S.S. Vadla, P. Gopalan, Structural, electrical, magnetic and magnetoelectric properties of Fe doped BaTiO3 ceramics, Ceram. Int. 42, 7 (2016) 8010-8016.10.1016/j.ceramint.2016.01.205 ↗
53. R. Arbain, M. Othman, S. Palaniandy, Preparation of iron oxide nanoparticles by mechanical milling, Miner. Eng., 24, 1 (2011) 1-9.10.1016/j.mineng.2010.08.025 ↗
54. L. Ribic-Zelenovic, M. Spasojevic, A. Maricic, M. M. Ristic, The effect of structural changes during sintering on the electric and magnetic traits of the Ni96.7Mo3.3 alloy nanostructured powder, Science of Sintering, 41, 2 (2009) 175-184.10.2298/SOS0902175R ↗
55. N. Cirovic, P. Spasojevic, L. Ribic-Zelenovic, P. Maskovic, M. Spasojevic, Synthesis, structure and properties of nickel-iron-tungsten alloy electrodeposits - part I: effect of synthesis parameters on chemical composition, microstructure and morphology, Science of Sintering, 47, 3 (2015) 347-365.10.2298/SOS1503347C ↗
56. N. Cirovic, P. Spasojevic, L. Ribic-Zelenovic, P. Maskovic, A. Maricic, M. Spasojevic, Synthesis, structure and properties of nickel-iron-tungsten alloy electrodeposits - Part II: effect of microstructure on hardness, electrical and magnetic properties, Science of Sintering, 48, 1 (2016) 1-16.10.2298/SOS1601001C ↗
57. M. Spasojević, N. Ćirović, L. Ribić-Zelenović, P. Spasojević, A. Maričić, Effect of deposition current density and annealing temperature on the microstructure, hardness and magnetic properties of nanostructured nickel-iron-tungsten alloys, J. Electrochem. Soc. 161 (2014) D463.10.1149/2.0041410jes ↗