Understanding the sintering behavior of AlCrFeNiTi high entropy alloy via phase field modeling illustration
Source abstract
Abstract
In this study, a computational approach is employed to understand the densification behavior of a multi-component alloy system during the sintering process by generating a phase field modeling image. First, a single-phase body-centered cubic (BCC) AlCrFeNiTi high entropy alloy (HEA) is prepared via a mechanical alloying (MA) route, and the powder-processed HEA is shown to exhibit dual BCC phases after spark plasma sintering (SPS). Then, phase field modeling (PFM) is used to generate a generalized image and to understand densification behavior during the sintering process. The results indicate that bulk and grain-boundary diffusion take place during the early stage and grain growth of the powder particles starts when the particles interact with their adjacent grains. Subsequently, in the final sintering stage point contacts and necking were observed. This understanding has been presented based on the phase field simulation to explore the different stages of the sintering during the processing.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · Intermetallics and Advanced Alloy Properties · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Science and Engineering, Ajou University, Suwon, Korea
Department of Energy Systems Research, Ajou University, Suwon, Korea
Department of Materials Science and Engineering, Ajou University, Suwon, Korea + Department of Energy Systems Research, Ajou University, Suwon, Korea
References (36)
Show source-provided references
1. B.S. Murty, S. Ranganathan, J.W. Yeh, P.P. Bhattacharjee, High-Entropy Alloys (2019) 1-363.10.1016/B978-0-12-816067-1.00001-1 ↗
2. A. Sharma, H. Lee, B. Ahn, Met. Mater. Int. 28 (2022) 2216-2224.10.1007/s12540-021-01125-0 ↗
3. M.J. Chae, A. Sharma, M.C. Oh, B. Ahn, Met. Mater. Int., 27 (2021) 629-638.10.1007/s12540-020-00823-5 ↗
4. C. Nagarjuna, K. Yong Jeong, Y. Lee, S. Min Woo, S. Ig Hong, H. Seop Kim, S.J. Hong, Adv. Powder Technol., 33 (2022) 103519.10.1016/j.apt.2022.103519 ↗
5. Y. Zhang, T.T. Zuo, Z. Tang, M.C. Gao, K.A. Dahmen, P.K. Liaw, Z.P. Lu, Prog. Mater. Sci. 61 (2014) 1-93.10.1016/j.pmatsci.2013.10.001 ↗
6. S. K. Dewangan, Studies on Microstructure, Mechanical and High-Temperature Oxidation Behaviour of Tungsten Containing High Entropy Alloys, Indian Institute of Technology Indore, 2021.
7. H.B. Cui, H.Y. Wang, J.Y. Wang, H.Z. Fu, Adv. Mat. Res., 189-193 (2011) 3840-3843.10.4028/www.scientific.net/AMR.189-193.3840 ↗
8. C. Nagarjuna, S.K. Dewangan, A. Sharma, K. Lee, S.J. Hong, B. Ahn, Met. Mater. Int., 29 (2023) 1968-1975.10.1007/s12540-022-01355-w ↗
9. A.G. Yirik, S. Gündüz, D. Taştemür, M.A. Erden, Sci. Sintering, 55 (2023) 45-56.10.2298/SOS2301045Y ↗
10. T.M.K. Tabonah, M. Akkaş, S. Islak, Sci. Sintering, 51 (2019).
11. S.K. Dewangan, V. Kumar, J. Alloys Compd., 923 (2022) 166167.10.1016/j.jallcom.2022.166167 ↗
12. K. Zhang, Z. Fu, Intermetallics, 22 (2012) 24-32.10.1016/j.intermet.2011.10.010 ↗
13. Q. Chao, T. Guo, T. Jarvis, X. Wu, P. Hodgson, D. Fabijanic, Surf. Coat. Technol., 332 (2017) 440-451.10.1016/j.surfcoat.2017.09.072 ↗
14. X. Xian, Z.-H. Zhong, L.-J. Lin, Z.-X. Zhu, C. Chen, Y.-C. Wu, Rare Metals, 41 (2022) 1015-1021.10.1007/s12598-018-1161-4 ↗
15. Y. Yu, J. Wang, J. Li, H. Kou, W. Liu, Mater. Lett., 138 (2015) 78-80.10.1016/j.matlet.2014.09.100 ↗
16. H. Shahmir, M. Nili-Ahmadabadi, A. Shafiee, T.G. Langdon, Mater. Sci. Eng., A, 718 (2018) 468-476.10.1016/j.msea.2018.02.002 ↗
17. A. Abedini, A. Malti, A. Kardani, A. Montazeri Adv. Powder Technol., 34 (2023) 104084.10.1016/j.apt.2023.104084 ↗
18. Y.U. Wang, Acta. Mater., 54 (2006) 953-961.10.1016/j.actamat.2005.10.032 ↗
19. S. Kimura, E. Murakami, T. Warabisako, al -, R.W. BarHett, W.E. Nelson, F.A. Halden -, K. Ahmed, C.A. Yablinsky, A. Schulte, T. Allen, A. El-Azab, Model Simul. Mat. Sci. Eng., 21 (2013) 065005.10.1088/0965-0393/21/6/065005 ↗
20. Z. Zhang, X.X. Yao, P. Ge, Int. J. Mech. Sci., 166 (2020) 105230.10.1016/j.ijmecsci.2019.105230 ↗
21. Y.U. Wang, Acta Mater., 54 (2006) 953-961.10.1016/j.actamat.2005.10.032 ↗
22. Y.F. Kao, T.J. Chen, S.K. Chen, J.W. Yeh, J. Alloys Compd., 488 (2009) 57-64.10.1016/j.jallcom.2009.08.090 ↗
23. R.S. Ganji, P. Sai Karthik, K. Bhanu Sankara Rao, K. V. Rajulapati, Acta Mater., 125 (2017) 58-68.10.1016/j.actamat.2016.11.046 ↗
24. Y. Dong, Y. Lu, J. Kong, J. Zhang, T. Li, J. Alloys Compd., 573 (2013) 96-101.10.1016/j.jallcom.2013.03.253 ↗
25. S.B. Biner, Programming Phase-Field Modeling, Springer International Publishing, Cham, 2017.10.1007/978-3-319-41196-5 ↗
26. S. Biswas, D. Schwen, H. Wang, M. Okuniewski, V. Tomar, Comput. Mater. Sci., 148 (2018) 307-319.10.1016/j.commatsci.2018.02.057 ↗
27. S. Biswas, D. Schwen, J. Singh, V. Tomar, Extreme Mech. Lett., 7 (2016) 78-89.10.1016/j.eml.2016.02.017 ↗
28. J. Hötzer, M. Seiz, M. Kellner, W. Rheinheimer, B. Nestler, Acta Mater., 164 (2019) 184-195.10.1016/j.actamat.2018.10.021 ↗
29. R.J. Zhang, Z.W. Chen, W. Fang, X.H. Qu, Trans. Nonferrous Met. Soc. China, 24 (2014) 783-789.10.1016/S1003-6326(14)63126-5 ↗
30. J. Deng, Mater. Trans., 53 (2012) 385-389.10.2320/matertrans.M2011317 ↗
31. C. Xie, S. Bai, X. Liu, M. Zhang, J. Du, J. Magnesium Alloys, (2022).
32. S.H. Huo, M. Qian, G.B. Schaffer, E. Crossin, Fundamentals of Aluminium Metallurgy: Production, Processing, and Applications (2010).10.1533/9780857090256.3.655 ↗
33. S. Biswas, D. Schwen, J. Singh, V. Tomar, Extreme Mech. Lett., 7 (2016) 78-89.10.1016/j.eml.2016.02.017 ↗
34. S.K. Dewangan, D. Kumar, S. Samal, V. Kumar, J. Mater. Eng. Perform., 30 (2021) 4421-4431.10.1007/s11665-021-05552-3 ↗
35. S.J.L. Kang, Sintering: Densification, Grain Growth and Microstructure, Elsevier, (2005).10.1016/B978-075066385-4/50009-1 ↗
36. G. Bernard-Granger, C. Guizard, J. Am. Ceram. Soc., 90 (2007) 1246-1250.10.1111/j.1551-2916.2006.01415.x ↗