journal article·2024-04

Structural defect-induced white light emission from synthetic Zn-rich trioctahedral smectite

Dhani Soren, Gayatree Mehena, Jiban K. Das, J.N. Behera, Puspalata Pattojoshi, Pratap Kumar Deheri

Publisher page

Abstract

In this research work, Al III substituted by Mg II and Zn II atoms in smectites (Sm) of the formula [Na 0.7Mg 2.5-xZn xLi 0.3Si 4O 10(OH) 2 ] were synthesized. Its structural and intrinsically highly photoluminescent (PL) properties were reported. The complex distributions of Mg II and Zn II atoms were observed in both octahedral and tetrahedral sites in the synthesized Sm (as evident with XRD, XPS, and ESR studies). The visible white light emission was observed when excited with UV light (250 nm). The observed strong photoluminescence (PL) was attributed to the electronic transition from oxygen vacancy to acceptor atoms induced by isomorphous substitution in both tetrahedral and octahedral sites ( Mg Al ′ , Mg Si ′ ′ , Zn Al ′ , Zn Si ′ ′ ) . With introduction of Zn II atom, there was an increase in Mg Al ′ and Mg Si ′ ′ defects energy levels that resulted in bathochromic shifts in V O ∙ ∙ → Mg Al ′ ′ , V O ∙ ∙ → Mg Si ′ ′ and V O ∙ ∙ → V O emission lines. Moreover, two additional emission lines in blue and red-light regions were observed due to two new Zn Al ′ , Zn Si ′ ′ defect centers that led to V O ∙ ∙ → Zn Al ′ and V O ∙ ∙ → Zn Si ′ ′ electronic transitions.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Luminescence Properties of Advanced Materials · Arsenic contamination and mitigation · Crystal Structures and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. Structural analysis, optical absorption and EPR spectroscopic studies on chrysotile10.1016/j.clay.2008.01.011 ↗
2. EPR study of paramagnetic defects in clay minerals10.2478/v10002-007-0021-x ↗
3. X-ray photoelectron spectroscopic studies of kaolinite and montmorillonite10.1016/0042-207X(95)00159-X ↗
4. Design of fluorescent materials for chemical sensing10.1039/b609548h ↗
5. Nature and thermal stability of paramagnetic defects in natural clay: a study by electron spin resonance10.1016/S0022-3697(00)00048-2 ↗
6. Elaboration and characterization of a new flat ceramic MF membrane made from natural Moroccan bentonite. Application to treatment of industrial wastewater10.1016/j.clay.2016.05.009 ↗
7. Removal of dyes by a new nano–TiO2 ultrafiltration membrane deposited on low-cost support prepared from natural Moroccan bentonite10.1016/j.clay.2017.08.019 ↗
8. Novel low-cost bentonite-based membranes for microfiltration, ultrafiltration, and nanofiltration applications
9. Bacterial vivisection: how fluorescence-based imaging techniques shed a light on the inner workings of bacteria10.1128/MMBR.00008-20 ↗
10. Graphene quantum dots prepared by electron beam irradiation for safe fluorescence imaging of tumor10.7150/ntno.67070 ↗
11. Clay minerals and their beneficial effects upon human health. A review10.1016/S0169-1317(01)00085-0 ↗
12. Synthesis and structural characterization of ferrous trioctahedral smectites: implications for clay mineral genesis and detectability on Mars10.1002/2014JE004763 ↗
13. Biomedical applications of clay10.1071/CH13361 ↗
14. Gas barrier properties of polymer/clay nanocomposites10.1039/C5RA10333A ↗
15. Bioactivities, biomedical and pharmaceutical applications of raw and functionalized clay minerals-a review
16. Direct optical band gap measurement in polycrystalline semiconductors: a critical look at the Tauc Method10.1016/j.jssc.2016.05.010 ↗
17. Characterization of intercalation compounds of sunscreens in a bentonite organoclay
18. Systematic XPS studies of metal oxides, hydroxides and peroxides10.1039/a908800h ↗
19. A study on UV-protection property of poly(vinyl alcohol)-montmorillonite composite nanofibers10.1002/vnl.21786 ↗
20. Chapter 2.13 - Full characterization of smectites10.1016/B978-0-08-098259-5.00015-9 ↗
21. Recent advances in design of fluorescence-based assays for high-throughput screening10.1021/acs.analchem.8b05303 ↗
22. Structural and electronic properties of iron-doped sodium montmorillonite clays: a first-principles DFT study10.1021/acsomega.9b00685 ↗
23. On the structural formula of smectites: a review and new data on the influence of exchangeable cations10.1107/S1600576720016040 ↗
24. Changes in optical properties upon Dye–Clay interaction: experimental evaluation and applications10.3390/nano11010197 ↗
25. Fluorescent gold nanoclusters stabilized on halloysite nanotubes: in vitro study on cytotoxicity10.1016/j.clay.2021.106106 ↗
26. Montmorillonite clay-modified disposable ink-jet-printed graphene electrode as a sensitive voltammetric sensor for the determination of cadmium(II) and lead(II)10.1007/s42452-020-2283-5 ↗
27. UV-protection characteristics of some clays10.1016/j.clay.2010.01.005 ↗
28. A Facile Approach to Generate Cross-Linked Poly(cyclotriphosphazene-co-oxyresveratrol) Nanoparticle with Intrinsically Fluorescence10.1007/s10904-018-0894-8 ↗
29. Fluorescence properties of carbon dots synthesized by different solvents for pH detector10.1016/j.optmat.2021.111889 ↗
30. Optical absorption spectra of clay minerals10.1346/CCMN.1973.0210109 ↗
31. Nanoclay-based drug delivery systems and their therapeutic potentials10.1039/D0TB01031F ↗
32. Hybrid inorganic-organic fluorescent silica nanoparticles—influence of dye binding modes on dye leaching10.1007/s10971-021-05578-y ↗
33. New laboratory procedure for distinguishing smectites with varying permanent layer charge based on the combination of Cu-trien and ethylene glycol solvation methods and X-ray diffraction10.1016/j.clay.2022.106788 ↗
34. A water-soluble fluorescent hybrid material based on aminoclay and its bioimaging application10.1039/C7RA08581H ↗
35. Development and challenge of fluorescent probes for bioimaging applications: from visualization to diagnosis10.1007/s41061-022-00376-8 ↗
36. Brighter, more stable, and less toxic: a Host–Guest interaction-aided strategy for fabricating fluorescent silica nanoparticles and applying them in bioimaging and biosensing at the cellular level10.1021/acsami.8b03034 ↗
37. How to correctly determine the band gap energy of modified semiconductor photocatalysts based on UV–Vis spectra10.1021/acs.jpclett.8b02892 ↗
38. Covalently modified nanoclays: synthesis, properties and applications
39. Solid state synthesis of Mg–Ni ferrite and characterization by XRD and XPS10.1016/j.jnucmat.2004.05.010 ↗
40. Sensors and biosensors based on clay-modified electrodes—new trends10.1016/j.clay.2004.06.005 ↗
41. Light emitting diode (LED) based fluorescence microscopy for tuberculosis detection: a review10.1007/s10103-019-02947-6 ↗
42. Stimuli-responsive fluorescent dyes for electrochemically tunable multi-color-emitting devices10.1016/j.snb.2021.129534 ↗
43. Nanoclays for polymer nanocomposites, paints, inks, greases and cosmetics formulations, drug delivery vehicle and waste water treatment10.1007/BF02704606 ↗
44. Clay catalysed rapid valorization of glycerol towards cyclic acetals and ketals10.1039/C5RA15817F ↗
45. Nanoclays for Biomedical applications
46. Biosensors based on acetylcholinesterase immobilized on Clay–Gold nanocomposites for the discrimination of chlorpyrifos and carbaryl10.1021/acsomega.2c03899 ↗
47. Fluorescent polymer nanoparticles based on dyes: seeking brighter tools for bioimaging10.1002/smll.201503396 ↗
48. Semiconductor quantum dots as fluorescent probes for in vitro and in vivo bio-molecular and cellular imaging10.3402/nano.v1i0.5161 ↗
49. Saikia · 2020 · 137
50. Accurate fluorescence diagnosis of cancer based on sequential detection of hydrogen sulfide and pH10.1021/acs.analchem.1c02449 ↗
51. Counterion-insulated near-infrared dyes in biodegradable polymer nanoparticles for in vivo imaging10.1039/D1NA00649E ↗
52. Near-infrared squaraine dye encapsulated micelles for in vivo fluorescence and photoacoustic bimodal imaging10.1021/acsnano.5b02172 ↗
53. Fluorescent carbon dots and their sensing applications10.1016/j.trac.2017.02.001 ↗
54. Manufacture and characterization of flat microfiltration membrane based on Moroccan pyrophyllite clay for pretreatment of raw seawater for desalination10.5004/dwt.2022.28260 ↗
55. Local structure determination of Zn-smectite10.2138/am-2022-8591 ↗
56. Fluorescent drug-loaded, polymeric-based, branched gold nanoshells for localized multimodal therapy and imaging of tumoral cells10.1021/nn406425h ↗
57. Titanium and iron-modified delaminated muscovite as photocatalyst for enhanced degradation of Tetrabromobisphenol A by visible light10.1142/S179360472051008X ↗
58. Bentonite-titanium dioxide functional nanocomposites suitable for wastewater treatment: an integrated photocatalyst-adsorbent system10.1039/D1NJ05472D ↗
59. Point-of-care diagnostics for infectious diseases: from methods to devices10.1016/j.nantod.2021.101092 ↗
60. World Health Organization · 2011
61. Bismuth nanoparticles decorated on Na-montmorillonite-multiwall carbon nanotube for simultaneous determination of heavy metal ions- electrochemical methods10.1016/j.jelechem.2022.116205 ↗
62. Synthesis of clay minerals10.1016/j.clay.2010.06.019 ↗
63. The white light caused by defects and complex cation distribution in ZnAl2-xFexO4 magnetic nanocrystals
64. Hectorite: Synthesis, modification, assembly and applications10.1016/j.clay.2019.05.001 ↗
65. Current fundamental and applied research into clay minerals in China10.1016/j.clay.2015.07.043 ↗
66. The effect of Local Dielectric Environment on the Fluorescence Quenching Efficiency of Gold Nanoshell10.1007/s11468-020-01320-6 ↗
67. Exfoliation of montmorillonite and related properties of clay/polymer nanocomposites10.1016/j.clay.2018.12.006 ↗
68. Preparation and Application of Fluorescent Carbon Dots10.1155/2015/787862 ↗