High-performance of sodium carboxylate-derived materials for electrochemical energy storage
Source abstract
Abstract
Four types of sustainable sodium carboxylate-derived materials are investigated as novel electrodes with high performance for lithium-ion batteries. Benefiting from the porous morphology provided by their intermolecular interactions, increasing capacity, excellent cycle stability and superior rate performance are observed for the sodium carboxylate- derived materials. The sodium oxalate (SO) electrodes displayed an increasing discharging capacity at a current density of 50 mA g−1 with with maximum values of 242.9 mA h g−1 for SO-631 and 373.9 mA h g−1 for SO-541 during the 100th cycle. In addition, the SO-541, SC-541 (sodium citrate), ST- 541 (sodium tartrate) and SP-541 (sodium pyromellitate) electrode materials displayed high initial capacities of 619.6, 392.3, 403.7 and 278.1 mA h g−1, respectively, with capacity retentions of 179%, 148%, 173% and 108%, respectively, after 200 cycles at 50 mA g−1 with. Even at a high current density of 2,000 mA g−1 with, the capacities remain 157.6, 131.3, 146.6 and 137.0 mA h g−1, respectively. With these superior electrochemical properties, the sodium carboxylate-derived materials could be considered as promising organic electrode materials for large-scale sustainable lithium-ion batteries.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Armand M, Tarascon JM. Building better batteries. Nature, 2008, 451: 652–65710.1038/451652a ↗
2. Tang Z. Non-noble metal anode based dual-ion batteries: promising high-energy and low-cost energy storage devices. Sci China Mater, 2017, 60: 368–37010.1007/s40843-017-9012-y ↗
3. Goodenough JB, Kim Y. Challenges for rechargeable Li batteries. Chem Mater, 2010, 22: 587–60310.1021/cm901452z ↗
4. Zhang Q, Huang Y, Liu Y, et al. F-doped O3-NaNi1/3Fe1/3Mn1/3O2 as high-performance cathode materials for sodium-ion batteries. Sci China Mater, 2017, 60: 629–63610.1007/s40843-017-9045-9 ↗
5. Goodenough JB, Park KS. The Li-ion rechargeable battery: a perspective. J Am Chem Soc, 2013, 135: 1167–117610.1021/ja3091438 ↗
6. Wang L, Hu Z, Zhao K, et al. Hollow spherical LiNi0.5Mn1.5O4 built from polyhedra with high-rate performance via carbon nanotube modification. Sci China Mater, 2016, 59: 95–10310.1007/s40843-016-0120-3 ↗
7. Choi NS, Chen Z, Freunberger SA, et al. Challenges facing lithium batteries and electrical double-layer capacitors. Angew Chem Int Ed, 2012, 51: 9994–1002410.1002/anie.201201429 ↗
8. Liang Y, Tao Z, Chen J. Organic electrode materials for rechargeable lithium batteries. Adv Energy Mater, 2012, 2: 742–76910.1002/aenm.201100795 ↗
9. Song Z, Zhou H. Towards sustainable and versatile energy storage devices: an overview of organic electrode materials. Energy Environ Sci, 2013, 6: 2280–230110.1039/c3ee40709h ↗
10. Häupler B, Wild A, Schubert US. Carbonyls: powerful organic materials for secondary batteries. Adv Energy Mater, 2015, 5: 140203410.1002/aenm.201402034 ↗
11. Yang S, Feng X, Müllen K. Sandwich-like, graphene-based titania nanosheets with high surface area for fast lithium storage. Adv Mater, 2011, 23: 3575–357910.1002/adma.201101599 ↗
12. Zhang K, Hu Z, Tao Z, et al. Inorganic & organic materials for rechargeable Li batteries with multi-electron reaction. Sci China Mater, 2014, 57: 42–5810.1007/s40843-014-0006-0 ↗
13. Zhang L, Liu Z, Cui G, et al. Biomass-derived materials for electrochemical energy storages. Prog Polymer Sci, 2015, 43: 136–16410.1016/j.progpolymsci.2014.09.003 ↗
14. Wu H, Shevlin SA, Meng Q, et al. Flexible and binder-free organic cathode for high-performance lithium-ion batteries. Adv Mater, 2014, 26: 3338–334310.1002/adma.201305452 ↗
15. Zhang K, Guo C, Zhao Q, et al. High-performance organic lithium batteries with an ether-based electrolyte and 9,10-anthraquinone (AQ)/CMK-3 cathode. Adv Sci, 2015, 2: 1500018–150002410.1002/advs.201500018 ↗
16. Xie J, Wang Z, Gu P, et al. A novel quinone-based polymer electrode for high performance lithium-ion batteries. Sci China Mater, 2016, 59: 6–1110.1007/s40843-016-0112-3 ↗
17. Huang W, Zhu Z, Wang L, et al. Quasi-solid-state rechargeable lithium-ion batteries with a calix[4]quinone cathode and gel polymer electrolyte. Angew Chem Int Ed, 2013, 52: 9162–916610.1002/anie.201302586 ↗
18. Chen H, Armand M, Demailly G, et al. From biomass to a renewable LixC6O6 organic electrode for sustainable Li-ion batteries. ChemSusChem, 2008, 1: 348–35510.1002/cssc.200700161 ↗
19. Ang WA, Gupta N, Prasanth R, et al. High-performing mesoporous iron oxalate anodes for lithium-ion batteries. ACS Appl Mater Interfaces, 2012, 4: 7011–701910.1021/am3022653 ↗
20. Oh HJ, Jo CH, Yoon CS, et al. Nickel oxalate dihydrate nanorods attached to reduced graphene oxide sheets as a high-capacity anode for rechargeable lithium batteries. NPG Asia Mater, 2016, 8: e27010.1038/am.2016.59 ↗
21. Wang S, Wang L, Zhang K, et al. Organic Li4C8H2O6 nanosheets for lithium-ion batteries. Nano Lett, 2013, 13: 4404–440910.1021/nl402239p ↗
22. Luo C, Huang R, Kevorkyants R, et al. Self-assembled organic nanowires for high power density lithium ion batteries. Nano Lett, 2014, 14: 1596–160210.1021/nl500026j ↗
23. Suo L, Hu YS, Li H, et al. A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries. Nat Commun, 2013, 4: 1481–184910.1038/ncomms2513 ↗
24. Armand M, Grugeon S, Vezin H, et al. Conjugated dicarboxylate anodes for Li-ion batteries. Nat Mater, 2009, 8: 120–12510.1038/nmat2372 ↗
25. Chen H, Armand M, Courty M, et al. Lithium salt of tetrahydroxybenzoquinone: toward the development of a sustainable Li-ion battery. J Am Chem Soc, 2009, 131: 8984–898810.1021/ja9024897 ↗
26. Yang X, Li C, Zhang G, et al. Polystyrene-derived carbon with hierarchical macro–meso–microporous structure for high-rate lithium- ion batteries application. J Mater Sci, 2015, 50: 6649–665510.1007/s10853-015-9214-7 ↗
27. Lei Z, Wei-kun W, An-bang W, et al. A MC/AQ parasitic composite as cathode material for lithium battery. J Electrochem Soc, 2011, 158: A991–A99610.1149/1.3605719 ↗
28. Chen J, Zhang Q, Zeng M, et al. Carboxyl-conjugated phthalocyanines used as novel electrode materials with high specific capacity for lithium-ion batteries. J Solid State Electrochem, 2016, 20: 1285–129410.1007/s10008-016-3126-6 ↗
29. Chen J, Guo J, Zhang T, et al. Electrochemical properties of carbonyl substituted phthalocyanines as electrode materials for lithium- ion batteries. RSC Adv, 2016, 6: 52850–5285310.1039/C6RA09826F ↗
30. Wang Y, Chen J, Jiang C, et al. Tetra-β-nitro-substituted phthalocyanines: a new organic electrode material for lithium batteries. J Solid State Electrochem, 2017, 21: 947–95410.1007/s10008-016-3419-9 ↗
31. Yokoji T, Kameyama Y, Maruyama N, et al. High-capacity organic cathode active materials of 2,2′-bis-p-benzoquinone derivatives for rechargeable batteries. J Mater Chem A, 2016, 4: 5457–546610.1039/C5TA10713J ↗
32. Yao M, Senoh H, Sakai T, Kiyobayashi T. 5,7,12,14-Pentacenetetrone as a high-capacity organic positive-electrode material for use in rechargeable lithium batteries. Int J Electrochem Sci, 2011, 6: 2905–291110.1016/S1452-3981(23)18227-7 ↗
33. Xiong D, Li X, Shan H, et al. Controllable oxygenic functional groups of metal-free cathodes for high performance lithium ion batteries. J Mater Chem A, 2015, 3: 11376–1138610.1039/C5TA01574J ↗
34. Churikov AV, Romanova VO. Determination of diffusion coefficient of lithium in substituted LiMn1.95Cr0.05O4 spinel using impedance technique. Russ J Electrochem, 2013, 49: 272–27710.1134/S1023193513030063 ↗