On the resistance spot welding of four-sheet stack of unequal sheet thickness

There is a lack of sufficient understanding regarding resistance spot welding behaviour of multi-layer structure. This paper investigates the weld nugget development and failure characteristics of four-sheet joint of dissimilar sheet thickness (0.7/1.2/1.2/0.9 mm) made on low carbon steel. The heat dissipation via water-cooled electrode hinders the weld nugget penetration into the thin/thick sheet interface. It was shown that increasing heat input led to bonding mechanism transition from solid-state welding to fusion welding at thin/thick sheet interface. Increasing welding current beyond a critical value changed the failure mode from interfacial to pullout leading to improvement of energy absorption of the joint. Fusion zone size along middle sheet/sheet interface proved to be the most important controlling factor for mechanical properties of four-sheet resistance spot welds.