Coating composition, weld parameter and consumable conditioning effects on weld metal composition in shielded metal arc welding
Source abstract
Abstract
Pipeline construction has been moving towards the use of higher strength low carbon steels as these become available. In order to achieve the required high strength and toughness to match those of the parent pipe, girth weld metals have to rely mostly on their composition. The aim of the present study was to characterise the influence of the consumable chemistry and moisture content, and the welding parameters on the composition of weld metals produced by E8010 and E9010 shielded metal arc (SMA) cellulosic consumables. The alloying compounds in the consumable coating were isolated using a caustic soda solution, analysed with electron backscattered diffraction and identified as a variety of oxides. Making use of a mechanised SMA welding machine, the effect on weld metal alloying element contents of the welding conditions was evaluated. Smaller welding arc voltages and lower consumable coating moisture content produced weld metals with richer chemistry. The element transfer mechanisms from the consumable coating to the weld metal are also discussed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
University of Adelaide, Adelaide, SA, Australia;, Email: nicolas.coniglio@adelaide.edu.au
University of Adelaide, Adelaide, SA, Australia
References (36)
Show source-provided references
1. 10.1146/annurev.ms.16.080186.00213310.1146/annurev.ms.16.080186.002133 ↗
2. 10.1016/B978-0-444-87427-6.50011-310.1016/B978-0-444-87427-6.50011-3 ↗
3. 10.1007/BF0267252810.1007/BF02672528 ↗
4. 10.1533/978184569486910.1533/9781845694869 ↗
5. Burck P. A. · Weld. J · 1990 · 69 · 115s
6. Davis M. L. E. · Met. Constr · 1983 · 15 · 338
7. Bracarense A. Q., and Liu S. ‘Chemical composition variations in shielded metal arc welds’, Weld. J. 1993, 72, (12), 529s–536s.
8. 10.55274/R001037810.55274/R0010378 ↗
9. Weaver R. J., and Ogborn J. S. ‘Cellulosic-covered electrode storage conditions – influence on weld properties’, Proc. Rio Pipeline Conf. & Expo. 2005, Rio de Janeiro, Brazil, October 2005, IBP1004_05.
10. 10.1007/BF0267252910.1007/BF02672529 ↗
11. 10.1016/B978-0-444-87427-6.50010-110.1016/B978-0-444-87427-6.50010-1 ↗
12. 10.1016/j.molliq.2008.06.00710.1016/j.molliq.2008.06.007 ↗
13. 10.1016/0032-3950(86)90354-010.1016/0032-3950(86)90354-0 ↗
14. Kulichikin V. G. · Khim. Volokna · 1973 · 1 · 25
15. 10.1002/masy.20065120210.1002/masy.200651202 ↗
16. 10.1007/s10570-007-9158-410.1007/s10570-007-9158-4 ↗
17. 10.1007/s10570-007-9159-310.1007/s10570-007-9159-3 ↗
18. 10.1002/(SICI)1097-4628(19980314)67:11<1871::AID-APP5>3.0.CO;2-I10.1002/(SICI)1097-4628(19980314)67:11<1871::AID-APP5>3.0.CO;2-I ↗
19. 10.1007/s10570-009-9370-510.1007/s10570-009-9370-5 ↗
20. 10.1021/bm070239910.1021/bm0702399 ↗
21. 10.1023/A:100927263236710.1023/A:1009272632367 ↗
22. 10.1007/s10570-007-9185-110.1007/s10570-007-9185-1 ↗
23. 10.1007/s10692-007-0032-910.1007/s10692-007-0032-9 ↗
24. Leslie W. C. ‘The physical metallurgy of steels’, 2nd edn; 1983, New York, McGraw-Hill.
25. 10.1016/j.carres.2006.12.02310.1016/j.carres.2006.12.023 ↗
26. 10.1007/s10570-008-9230-810.1007/s10570-008-9230-8 ↗
27. 10.1016/j.matdes.2006.02.01210.1016/j.matdes.2006.02.012 ↗
28. 10.1007/s11663-008-9170-610.1007/s11663-008-9170-6 ↗
29. 10.1179/13621719910153787910.1179/136217199101537879 ↗
30. 10.1016/0921-5093(96)10370-110.1016/0921-5093(96)10370-1 ↗
31. Davis M. L. E. · Weld. J · 1991 · 70 · 57s
32. Kubaschewski O., and Alcock C. B. ‘Metallurgical thermochemistry’, 5th edn; 1979, Oxford, Pergamon Press.
33. Kor G. J. W. ‘Equilibria between Fe–Cu–Ni–Co–Mo alloys and slags of varying basicities at 1450°C’, Proc. 2nd Int. Symp. on ‘Metallurgical slags and fluxes’, Lake Tahoe, NV, USA, November 1984, The Metallurgical Society of AIME, 107–128.
34. Blander M., and Olson D. L. ‘Thermodynamic and kinetic factors in the pyrochemistry of submerged arc flux welding of iron-based alloys’, Proc. 2nd Int. Symp. on ‘Metallurgical slags and fluxes’, Lake Tahoe, NV, USA, November 1984, The Metallurgical Society of AIME, 271–277.
35. 10.1007/BF0267971510.1007/BF02679715 ↗
36. 10.1063/1.169801210.1063/1.1698012 ↗