Material properties of the nugget zone in resistance spot-welded DP980 steel joint at various strain rates
Source abstract
Abstract
This paper suggests an approach to evaluate the material properties of the nugget zone in resistance spot-welded DP980 steel joints at various strain rates ranging from 0.001 to 100 s −1 . Two kinds of micro-specimens are prepared for the tests: one cut from the centre of the welded nugget zone; and the other cut at 1 mm away from the welded nugget centre. Test results show that the welded nugget zone has little discrepancy in the material properties depending on sampling location and that the flow stress of the nugget zone is relatively high compared with that of the base metal at each strain rate tested. It is confirmed from microscopic observation that the differences are mainly caused by the formation of coarse martensite phase in the welded nugget zone due to the rapid cooling after the resistance spot-welding process.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Microstructure and mechanical properties · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical, Aerospace and Systems Engineering, Korea Advanced Institute of Science and Technology, Daejeon, Republic of Korea
Central Research Institute, Samsung Heavy Industries, Daejeon, Republic of Korea
Materials Testing & Reliability Department, Korea Institute of Material Science, Gyeongnam, Republic of Korea
References (22)
Show source-provided references
1. Schultz RA, Abraham AK. Metallic material trends for North American light vehicles. Paper presented at: Great Designs in Steel; 2009 May 13; Southfield, MI, USA.
2. 10.1179/1362171815Y.000000002810.1179/1362171815Y.0000000028 ↗
3. 10.1179/136217109X1259074647253510.1179/136217109X12590746472535 ↗
4. 10.1179/1362171813Y.000000016510.1179/1362171813Y.0000000165 ↗
5. Haggag FM, Bell GEC. Measurement of yield strength and flow properties in spot welds and their HAZs at various strain rates. Paper presented at: The ASM 3rd International Conference on Trends in Welding Research; 1992 June 1–5; Gatlinburg, TN, USA.
6. 10.1088/0965-0393/3/3/00710.1088/0965-0393/3/3/007 ↗
7. 10.1007/BF0232355410.1007/BF02323554 ↗
8. 10.1504/IJMPT.2001.00127710.1504/IJMPT.2001.001277 ↗
9. Nakayama E · 2003
10. 10.1007/s11661-005-0263-410.1007/s11661-005-0263-4 ↗
11. 10.1016/j.ijmecsci.2011.04.00810.1016/j.ijmecsci.2011.04.008 ↗
12. 10.1007/s12239-009-0023-310.1007/s12239-009-0023-3 ↗
13. 10.1016/0022-460X(64)90008-210.1016/0022-460X(64)90008-2 ↗
14. 10.1109/84.62310710.1109/84.623107 ↗
15. 10.1007/s11340-006-9010-z10.1007/s11340-006-9010-z ↗
16. 10.1016/j.cap.2008.08.04810.1016/j.cap.2008.08.048 ↗
17. 10.1016/S1359-6454(03)00006-510.1016/S1359-6454(03)00006-5 ↗
18. Huh YH · Adv Nondestruct Eval · 2004 · 270 · 744
19. Huh YH · Adv Fract Strength · 2005 · 297 · 53
20. 10.1007/s11340-010-9395-610.1007/s11340-010-9395-6 ↗
21. 10.1007/s11340-014-9870-610.1007/s11340-014-9870-6 ↗
22. 10.1016/j.ijmecsci.2010.01.00610.1016/j.ijmecsci.2010.01.006 ↗