Active brazing filler metal on SiC particle reinforced aluminium matrix composites
Source abstract
Abstract
The joints of aluminium matrix composites with high SiC particle content were achieved by vacuum brazing with Al–12Si–1·5Mg–4Ti foil as active filler. The effect of Ni coating and Ti on the wetting behaviour of filler metal on the composite was investigated. Owing to the presence of Ni coating, the wettability of liquid filler metal on the composite was enhanced obviously, and Ti(AlSi)3 intermetallic is in situ strengthening phase in the seam. Sound joints with well appearance were obtained, and the optimised shear strength of the joint reached 109.3 MPa. Capable welding parameters were broadened by the presence of Ni coating and Al–12Si–1.5Mg–4Ti foil as filler for brazing of aluminium matrix composites with high SiC particle content.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · MXene and MAX Phase Materials · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Materials Science and Engineering, Henan Polytechnic University, Jiaozuo 454003, China
School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150000, China
Henan Jingtai High-Novel Materials Ltd of Science and Technology, Jiaozuo 454003, China
References (26)
Show source-provided references
1. 10.1007/BF0111387210.1007/BF01113872 ↗
2. 10.1016/j.mseb.2011.12.04210.1016/j.mseb.2011.12.042 ↗
3. 10.1016/S0924-0136(03)00815-X10.1016/S0924-0136(03)00815-X ↗
4. 10.1016/S0266-3538(99)00168-210.1016/S0266-3538(99)00168-2 ↗
5. 10.1007/s11661-005-0093-410.1007/s11661-005-0093-4 ↗
6. Han Z. J. · J. Cent. South Univ. Sci. Technol · 2006 · 37 · 229
7. 10.1016/S1003-6326(08)60140-510.1016/S1003-6326(08)60140-5 ↗
8. 10.1016/j.jmatprotec.2006.03.16810.1016/j.jmatprotec.2006.03.168 ↗
9. Feng T. · J. Univ. Sci. Technol. B Miner. Met. Mater · 2014 · 13 · 267
10. 10.1016/j.jmatprotec.2008.08.01510.1016/j.jmatprotec.2008.08.015 ↗
11. 10.1016/j.jmatprotec.2007.02.02810.1016/j.jmatprotec.2007.02.028 ↗
12. 10.1016/j.mseb.2012.08.00110.1016/j.mseb.2012.08.001 ↗
13. 10.1016/S1359-835X(98)00186-910.1016/S1359-835X(98)00186-9 ↗
14. 10.1016/j.jmatprotec.2007.02.02810.1016/j.jmatprotec.2007.02.028 ↗
15. Wang P. · Hot Working Technol · 2014 · 155 · 160
16. 10.1007/BF0266821010.1007/BF02668210 ↗
17. 10.1016/j.jallcom.2006.10.13110.1016/j.jallcom.2006.10.131 ↗
18. 10.1016/j.jallcom.2006.08.06810.1016/j.jallcom.2006.08.068 ↗
19. 10.1016/S0927-7757(00)00642-710.1016/S0927-7757(00)00642-7 ↗
20. 10.1016/S0257-8972(02)00032-410.1016/S0257-8972(02)00032-4 ↗
21. 10.1016/j.surfcoat.2005.05.03110.1016/j.surfcoat.2005.05.031 ↗
22. 10.1016/S1000-9361(08)60177-610.1016/S1000-9361(08)60177-6 ↗
23. Qin S. Y. · Metall. Mater. Trans. A · 1999 · 272 · 363
24. Wu G. H. · Electron. Compon. Mater · 2003 · 22 · 27
25. 10.1016/j.powtec.2013.03.05410.1016/j.powtec.2013.03.054 ↗
26. 10.1016/S1003-6326(14)63159-910.1016/S1003-6326(14)63159-9 ↗