Non-isothermal thermomechanical metallurgical model and its application to welding simulations
Source abstract
Abstract
This paper presents a thermomechanical metallurgical macroscopic model for steels. The model is based on an existing model that is extended for non-isothermal behaviour in combination with phase transformations. The model and its numerical implementation in ABAQUS are described using vector notation for stress and strain tensors. Model parameters are presented for the dual phase steel DP600 and the structural steel S355. For DP600, thermomechanical model parameters, i.e. hardening and strain rate dependency, have been obtained by fitting temperature and strain rate dependent tensile tests. A metallurgical model was implemented using data obtained from phase field models for the austenite growth and continuous cooling transition diagrams for phase transformations from austenite to low temperature phases. The model is applied to welding simulations of DP600 overlap joints and S355 T joints. The final distortion is compared to experiments and it is shown that the model presented is able to reproduce the experimental results very well.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Salzgitter AG: www.salzgitter-flachstahl.de.
2. 10.1016/0749-6419(86)90010-010.1016/0749-6419(86)90010-0 ↗
3. 10.1016/0749-6419(89)90015-610.1016/0749-6419(89)90015-6 ↗
4. Lemaitre J., and Chaboche J.L. ‘Mechanics of solid materials’; 1994, Cambridge, Cambridge University Press.
5. 10.1016/0749-6419(91)90050-910.1016/0749-6419(91)90050-9 ↗
6. Simo J., and Hughes T. ‘Computational inelasticity’; 1998, New York, Springer.
7. Seifert T. · Comput. Methods Appl. Mech. Eng · 2007 · 17
8. 10.1002/nme.162015121010.1002/nme.1620151210 ↗
9. Weber G. ‘Computational procedures for a new class of finite deformation elastic-plastic constitutive equations’, PhD thesis, Massachusetts Institute of Technology, Cambridge, MA, USA, 1988.
10. Inc ABAQUS. www.abaqus.com.
11. Thiessen R. G. ‘Physically-based modelling of material response to welding’, PhD thesis, TU Delft, Delft, The Netherlands, 2006.
12. 10.1002/stab.20049011110.1002/stab.200490111 ↗
13. Crisfield M. A. ‘Non-linear finite element analysis of solids and structures’, Vol. 1; 1991, New York, J. Wiley & Sons.
14. Mase G. ‘Continuum mechanics’, 1st edn; 1969, New York, McGraw-Hill.
15. Mase G. ‘Schaum's outline of continuum mechanics’, 1st edn; 1969, New York, McGraw-Hill.
16. Gross D., and Seelig T. ‘Bruchmechanik: mit einer Einführung in die Mikromechanik’, 3rd edn; 2001, Berlin, Springer Verlag.10.1007/978-3-662-06173-2_1 ↗
17. Hill R. · Proc. Roy. Soc. Lond. A · 1948 · 193 · 28110.1098/rspa.1948.0045 ↗
18. Banabic D. ‘Formability of metallic materials’, 1st edn; 2000, Berlin, Springer.10.1007/978-3-662-04013-3 ↗
19. 10.1007/s11661-006-1092-910.1007/s11661-006-1092-9 ↗
20. 10.1016/0001-6160(62)90041-X10.1016/0001-6160(62)90041-X ↗
21. Schenk T. ‘Deformation behavior of tungsten and crack propagation in thin tungsten wires’, Master thesis, Fraunhofer IWM, Freiburg, Germany, 2006.
22. 10.1016/0749-6419(92)90024-710.1016/0749-6419(92)90024-7 ↗
23. Gottstein G. ‘Physikalische Grundlagen der Materialkunde’, 3rd edn; 2007, Berlin, Springer Verlag.
24. 10.1063/1.169834810.1063/1.1698348 ↗
25. 10.1115/1.281226710.1115/1.2812267 ↗
26. 10.1088/0965-0393/2/3A/01310.1088/0965-0393/2/3A/013 ↗
27. Rodriguez M. ‘Characterization of tungsten wires’, Master thesis, Fraunhofer IWM Freiburg, Freiburg, Germany, 2005.
28. Seifert T. ‘Identification of material parameters using instrumented indentation test data’, Master thesis, University of Stuttgart, Stuttgart, Germany, 2003.
29. Sandfeld S. ‘Comparative study for use of numerical and analytical gradients in parameter identification’, Master thesis, University of Stuttgart, Stuttgart, Germany, 2005.
30. Andrews K. W. · J. Iron Steel Inst · 1965 · 203 · 721
31. Donnay B., Herman J. C., Leroy V., Lotter U., Grossterlinden R., and Pircher H.: Proc. 2nd Int. Conf. on ‘Modelling of metal rolling process’, London, UK, December 1996, The Institute of Materials, 23–35.
32. Steven W. · J. Iron Steel Inst · 1956 · 183 · 349
33. Seyffarth P., Meyer B., and Scharff A. ‘Großer Atlas Schweiß- ZTU-Schaubilder’; 1992, Dusseldorf, DVS-Verlag.
34. 10.1016/0749-6419(89)90001-610.1016/0749-6419(89)90001-6 ↗
35. 10.2355/isijinternational.46.148910.2355/isijinternational.46.1489 ↗
36. 10.1016/0001-6160(59)90170-110.1016/0001-6160(59)90170-1 ↗
37. 10.1080/0149573920894611710.1080/01495739208946117 ↗
38. 10.1016/S0927-0256(02)00256-210.1016/S0927-0256(02)00256-2 ↗
39. 10.1016/j.matlet.2005.02.01810.1016/j.matlet.2005.02.018 ↗
40. 10.1007/BF0265992410.1007/BF02659924 ↗
41. Thiessen R. G. ‘Physically-based modelling of material response to welding’, PhD thesis, TU Delft, Delft, The Netherlands, 2006.
42. 10.1016/j.ijmachtools.2007.01.00310.1016/j.ijmachtools.2007.01.003 ↗
43. van der Aa E. ‘Local cooling during welding: prediction and control of residual stresses and buckling distortion’, PhD thesis, TU Delft, Delft, The Netherlands, 2007.
44. Schwenk C. ‘FE-Simulation des Schweißverzugs laserstrahlgeschweißter dünner Bleche’; 2007, Berlin, BAM.
45. Richter F. ‘Die wichtigsten physikalischen Eigenschaften von 52 Eisenwerkstoffen’; 1973, Düsseldorf, Stahleisen Sonderberichte.
46. 10.1007/BF0266733310.1007/BF02667333 ↗
47. Schenk T., Richardson I., G. Eßer, M. Kraska and S. Ohnimus: Proc. 2nd Int. Workshop on ‘Thermal forming and welding distortion’, Bremen, Germany, April 2008, BIAS, 83–96.
48. Kloosterman G. ‘Contact methods in finite element methods’, PhD Thesis, TU Twente, Enschede, The Netherlands, 2002.
49. Kang Y., Shun Y., and Wang X.: Proc. Conf. NUMISHEET ’96, Dearborn, MI, USA, September–October 1996, Ohio State University, 61–64.
50. 10.1016/S0924-0136(00)00599-910.1016/S0924-0136(00)00599-9 ↗
51. Samper V., and Felder E.: Proc. 16th Leeds-Lyon Symp. on ‘Tribology’, Lyon, France, September 1989, Institut National des Science Appliquées des Lyon, 271–279.10.1016/S0167-8922(08)70265-7 ↗
52. 10.1016/0026-0800(79)90041-710.1016/0026-0800(79)90041-7 ↗
53. Schenk T., Ohnimus S., Kraska M., and Richardson I. M.: Proc. 17th Int. Conf. on ‘Computers in welding technology and manufacturing’, Cranfield, UK, June 2008, Cranfield University. Paper 38, published on CD.