Novel Ca-SLS-LDH nanocomposites obtained via lignosulfonate modification for corrosion protection of steel bars in simulated concrete pore solution
Source abstract
Abstract
Abstract A novel nanocomposite (Ca-SLS-LDH) of Ca-Al-layered double hydroxides (Ca-LDH) modified with sodium lignosulfonate (SLS) was synthesized using hydrothermal synthesis method. Mechanistically, X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR) analysis revealed that SLS modified the nanocomposite by adsorbing onto the surface of Ca-LDH. The specific surface area of Ca-SLS-LDH was larger and the average particle size was smaller than that of Ca-LDH. This enabled the Ca-SLS-LDH to bind chlorides more effectively and is hence suitable for application in reinforced concrete. Ca-SLS-LDH binds to chlorides through ion exchange and surface adsorption, which is similar to the binding mechanism of Ca-LDH to chlorides. Ca-SLS-LDH efficiently controlled the corrosion of carbon steel in simulated concrete pore (SCP) solution and had a stronger inhibitory effect compared to unmodified LDHs at equal concentrations. Ca-SLS-LDH improved the resistance to corrosion by binding more chlorides in SCP solution. In addition, it may be due to the anti-corrosion effect of SLS on steel bars, thereby delaying the initiation of corrosion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Layered Double Hydroxides Synthesis and Applications · Magnesium Oxide Properties and Applications · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. The synergistic effect of zinc acetate on the protective behavior of sodium J. Mol. Liq. lignosulfonate for corrosion prevention of mild steel in 3.5 wt% NaCl electrolyte: surface and electrochemical studies10.1016/j.molliq.2020.113617 ↗
2. Reinforcement corrosion in concrete structures, its monitoring and service life prediction - a review10.1016/S0958-9465(02)00086-0 ↗
3. Effect of protective oxide scales in the macrogalvanic behaviour of concrete reinforcements10.1016/S0010-938X(98)00040-7 ↗
4. Chloride threshold values to depassivate reinforcing bars embedded in a standardized OPC mortar10.1016/S0008-8846(00)00265-9 ↗
5. Ru incorporation enhanced electrochemical performance of spray deposited Mn: Co3O4 nano-composite: electrochemical approach10.1016/j.jaap.2018.01.013 ↗
6. Investigation of the molecular weight increase of commercial lignosulfonates by laccase catalysis10.1021/bm901258v ↗
7. Characteristics of the steel-concrete interface and their effect on the corrosion of steel bars in concrete10.1016/j.conbuildmat.2020.119162 ↗
8. Multifunctional inhibition based on layered double hydroxides to comprehensively control corrosion of carbon steel in concrete10.1016/j.corsci.2017.06.026 ↗
9. Preparation of Ca/Al-Layered double hydroxide and the influence of their structure on early strength of cement10.1016/j.conbuildmat.2018.06.186 ↗
10. Synthesis, characterization and working mechanism of a novel sustained-release-type fluid loss additive for seawater cement slurry10.1016/j.jcis.2018.03.079 ↗
11. Chloride binding of synthetic Ca-Al-NO3 LDHs in hardened cement paste10.1016/j.conbuildmat.2015.05.047 ↗
12. Chloride binding capacity of LDHs with various divalent cations and divalent to trivalent cation ratios in different solutions10.1039/C9CE01322A ↗
13. Interplay of anionic functionality in polymer-grafted lignin superplasticizers for Portland cement10.1021/acs.iecr.9b03973 ↗
14. Electrochemical impedance measurement and modeling analysis of the carbonation behavior for cementitious materials10.1016/j.conbuildmat.2013.12.100 ↗
15. Effect of superplasticizers on the hydration kinetic and mechanical properties of Portland cement pastes10.1016/j.jare.2011.05.008 ↗
16. The use of electrochemical impedance spectroscopy in the evaluation of coatings for outdoor bronze10.1179/sic.2004.49.1.53 ↗
17. Corrosion protection properties of silane pre-treated powder coated galvanized steel10.1016/j.porgcoat.2009.06.011 ↗
18. Fabrication of magnetic lignosulfonate using ultrasonic-assisted in situ synthesis for efficient removal of Cr(VI) and Rhodamine B from wastewater10.1016/j.jhazmat.2019.04.086 ↗
19. Comparison of rates of general corrosion and maximum pitting penetration on concrete embedded steel reinforcement10.1016/0008-8846(95)00006-2 ↗
20. Sodium lignosulfonate induced vaterite calcium carbonate with multilayered structure10.1002/ejic.201301228 ↗
21. Preparation and characterization of lignosulfonate grafted layered double hydroxides and their applications as anti-ultraviolet additives for bitumen10.1016/j.conbuildmat.2018.11.100 ↗
22. Lignosulfonate interleaved layered double hydroxide: a novel green organoclay for bio-related polymer10.1016/j.clay.2012.10.011 ↗
23. Impedance spectroscopy: Emphasizing solid materials and systems (A)
24. The cost of corrosion in China10.1038/s41529-017-0005-2 ↗
25. Polymeric vesicles for corrosion control in reinforced mortar: electrochemical behavior, steel surface analysis and bulk matrix properties10.1016/j.corsci.2012.08.043 ↗
26. Cr(VI) removal from aqueous solution using biochar modified with Mg/Al-layered double hydroxide intercalated with ethylenediaminetetraacetic acid10.1016/j.biortech.2018.12.114 ↗
27. Corrosion cost and preventive strategies in the United States
28. Chloride corrosion threshold of reinforcing steel in alkaline solutions - open-circuit immersion tests10.5006/1.3290325 ↗
29. Controlled release of nitrate and molybdate intercalated in Zn-Al-layered double hydroxide nanocontainers towards marine anticorrosion applications10.1016/j.colcom.2018.03.003 ↗
30. Selenite uptake by Ca-Al LDH: a description of intercalated anion coordination geometries10.1021/acs.est.7b04644 ↗
31. Effect of organically modified Ni-Al layered double hydroxide loading on the thermal and morphological properties of L-methionine containing poly (amide-imide) nanocomposites10.1039/C5RA03383G ↗
32. Efficient separation of terephthalate and phthalate anions by selective ion-exchange intercalation in the layered double hydroxide Ca2Al(OH)6·NO3·2H2O10.1021/cm0002057 ↗
33. Adsorption of styrene sulfonate vs. polystyrene sulfonate on layered double hydroxides10.1016/S1387-1811(02)00505-X ↗
34. Preparation and characterization of new Ca-Al-polycarboxylate layered double hydroxides10.1016/j.matlet.2006.03.070 ↗
35. Potentiostatic transient technique, a simple approach to estimate the corrosion current density and Stern-Geary constant of reinforcing steel in concrete10.1016/j.cemconres.2010.04.006 ↗
36. Elastomer/LDH nanocomposites: Synthesis and studies on nanoparticle dispersion, mechanical properties and interfacial adhesion10.1016/j.eurpolymj.2008.07.025 ↗
37. Preparation and properties of blends composed of lignosulfonated layered double hydroxide/plasticized starch and thermoplastics10.1016/j.carbpol.2013.03.042 ↗
38. Thermal behaviour of the nitrated AFm phase Ca4Al2(OH)12(NO3)2·4H2O and structure determination of the intermediate hydrate Ca4Al2(OH)12(NO3)2·2H2O10.1016/S0008-8846(99)00251-3 ↗
39. Synthesis and characterisation of nanocrystalline Ca-Al layered double hydroxide {[Ca2Al(OH)6]NO3.nH2O}: in vitro study10.1179/1743676112Y.0000000045 ↗
40. Theoretical analysis of the measurement of polarisation resistance in reinforced concrete10.1016/S0958-9465(00)00040-8 ↗
41. Effect of laser surface remelting on the corrosion behavior of commercially pure titanium sheet10.1016/S0921-5093(02)00477-X ↗
42. Lignosulfonate, a water-solubilized lignin from the waste liquor of the pulping process, inhibits the infectivity and cytopathic effects of human immunodeficiency virus in vitro
43. Crystal structures of some double hydroxide minerals10.1180/minmag.1973.039.304.01 ↗
44. Zn-Al-NO2 layered double hydroxide as a controlled-release corrosion inhibitor for steel reinforcements10.1016/j.matlet.2018.10.177 ↗
45. Synergistic corrosion inhibition effect of metal cations and mixtures of organic compounds: a review10.1016/j.jece.2016.12.001 ↗
46. Lignosulfonate as dispersant for layered double hydroxide in nitrile-butadiene rubber composites10.1016/j.clay.2014.05.009 ↗
47. Facile preparation of pure CaAl-layered double hydroxide and their application as a hardening accelerator in concrete10.1016/j.cej.2009.08.003 ↗
48. A general and scalable formulation of pure CaAl-Layered double hydroxide via an organic/water solution route10.1021/ie102135k ↗
49. Evaluation of ultraviolet aging resistance of bitumen containing different organic layered double hydroxides10.1016/j.conbuildmat.2018.10.172 ↗
50. Chloride removal and corrosion inhibitions of nitrate, nitrite-intercalated Mg–Al layered double hydroxides on steel in saturated calcium hydroxide solution10.1016/j.clay.2018.07.023 ↗
51. Aminobenzoate modified MgAl hydrotalcites as a novel smart additive of reinforced concrete for anticorrosion applications10.1016/j.conbuildmat.2013.06.049 ↗
52. A novel study on separate and combined effects of the cathodic protection and elastic stress on corrosion behaviors of the Q235B steel in 3.5% NaCl aqueous solution10.1016/S1452-3981(23)16177-3 ↗
53. The effect of two types of modified Mg-Al hydrotalcites on reinforcement corrosion in cement mortar10.1016/j.cemconres.2017.06.004 ↗
54. EIS analysis on chloride-induced corrosion behavior of reinforcement steel in simulated carbonated concrete pore solutions10.1016/j.jelechem.2012.09.012 ↗
55. Chemical and physical effects of sodium lignosulfonate superplasticizer on the hydration of Portland cement and solidification/stabilization consequences10.1016/0008-8846(95)00055-H ↗
56. Distribution of corrosion and pitting factor of steel in corroded RC beams10.1016/j.conbuildmat.2015.07.119 ↗
57. Structural performance of RC beams damaged by natural corrosion under sustained loading in a chloride environment10.1016/j.engstruct.2015.04.001 ↗
58. Immobilization potential of Cr(VI) in sodium hydroxide activated slag pastes10.1016/j.jhazmat.2016.09.019 ↗
59. Influence of load-induced cracks coupled or not with top-casting-induced defects on the corrosion of the longitudinal tensile reinforcement of naturally corroded beams exposed to chloride environment under sustained loading10.1016/j.cemconres.2020.105972 ↗
60. Understanding the binding and leaching of Cr(VI) in calcium aluminate cement based solidified/stabilized pastes10.1016/j.conbuildmat.2020.120040 ↗
61. The adsorption and dispersion performance of superplasticizers on cement particles10.4028/www.scientific.net/AMR.557-559.887 ↗
62. Preparation of MgAl layered double hydroxides intercalated with nitrite ions and corrosion protection of steel bars in simulated carbonated concrete pore solution10.1016/j.corsci.2019.03.007 ↗