Mechanical and thermal properties of geopolymers derived from metakaolin with iron mine waste
Source abstract
Abstract
The construction sector is a major contributor to the increase in energy consumption and CO2 emissions, predominantly through the production of Ordinary Portland Cement (OPC). Recent research has focused on building materials, particularly focusing on amorphous aluminosilicates such as geopolymers, with the objective of alleviating environmental impact by enhancing energy management and embracing more sustainable, cost-effective production techniques while maintaining mechanical and thermal properties. This investigation scrutinizes the mechanical and thermal properties of geopolymers based on metakaolin (MK) and incorporating iron mine waste (Hem), predominantly composed of hematite, across various proportions (ranging from 0% to 50% Hem). Diverse methodologies, including compressive strength testing, bulk density measurement, X-ray diffraction, and thermal conductivity analysis, were utilized to characterize the geopolymers. The results revealed that formulations consisting of 100%MK and 90%MK10%Hem exhibit the highest compressive strengths, measuring at 40 MPa, after a 90-day curing period. However, the most sustainable option, yielding a compressive strength of 37 MPa, is observed in the formulation comprising 60%MK40%Hem, due to its increased use of mine waste. Additionally, geopolymers incorporating higher proportions of mine waste showed reduced thermal conductivity and diffusivity. For instance, the thermal conductivity of the 100%MK geopolymer was recorded at 0.58 W/m•K, with a diffusivity of 0.46 × 10−6 m2/s, whereas the formulation containing 60%MK40%Hem displayed values of 0.46 W/m•K and 0.38 × 10−6 m2/s, respectively. These diminished values signify an enhancement in energy efficiency within buildings employing geopolymers incorporating iron mine waste.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Physico-mechanical, thermal insulation properties, and microstructure of geopolymer foam concrete containing sawdust ash and egg shell
2. A novel geopolymer application: Coatings to protect reinforced concrete against corrosion10.1016/j.clay.2016.10.029 ↗
3. Durability and leaching behavior of mine tailings-based geopolymer bricks10.1016/j.conbuildmat.2013.03.075 ↗
4. Fabrication and characterization of metakaolin-based fiber reinforced fire resistant geopolymer
5. Clean production and properties of geopolymer concrete; A review10.1016/j.jclepro.2019.119679 ↗
6. Accelerated carbonation testing of alkali-activated binders significantly underestimates service life: the role of pore solution chemistry10.1016/j.cemconres.2012.07.002 ↗
7. Pull-out behavior of different fibers in geopolymer mortars: effects of alkaline solution concentration and curing10.1617/s11527-016-0889-2 ↗
8. Advances in geopolymer materials: a comprehensive review
9. Ft-ir study, thermal analysis, and evaluation of the antibacterial activity of a mk-geopolymer mortar using glass waste as fine aggregate10.3390/polym13172970 ↗
10. Thermal, chemical and mechanical characterization of recycled corundum powder in metakaolin-based geopolymer binder
11. GEOPOLYMERS - Inorganic polymerie new materials10.1007/BF01912193 ↗
12. Fresh properties, compressive strength and microstructure of fly ash geopolymer paste blended with iron ore tailing under thermal cycle10.1016/j.conbuildmat.2016.05.059 ↗
13. Thermal conductivity of metakaolin geopolymers used as a first approximation for determining gel interconnectivity10.1021/ie060187o ↗
14. Design of acid-geopolymers based on clays by-products for methylene blue removal from wastewater
15. Technical and environmental characterization of hydraulic and alkaline binders10.1016/j.jclepro.2018.06.090 ↗
16. Eurostat Statistics
17. New eco-cellular concretes: Sustainable and energy-efficient materials10.1039/C8GC02066C ↗
18. Preparation of high-performance silico-aluminophosphate geopolymers using fly ash and metakaolin as raw materials
19. An environmental evaluation of geopolymer based concrete production: reviewing current research trends10.1016/j.jclepro.2011.03.012 ↗
20. Geopolymer concrete with metakaolin for sustainability: a comprehensive review on raw material’s properties, synthesis, performance, and potential application10.1007/s11356-021-17849-w ↗
21. Utilisation of iron ore mine tailings for the production of geopolymer bricks10.1080/17480930.2014.993834 ↗
22. Evaluation of thermal conductivity, mechanical and transport properties of lightweight aggregate foamed geopolymer concrete10.1016/j.enbuild.2013.12.029 ↗
23. A comprehensive review on fly ash-based geopolymer10.3390/jcs6080219 ↗
24. Weathered bottom ash from municipal solid waste incineration: alkaline activation for sustainable binders10.1016/j.conbuildmat.2022.126983 ↗
25. Baseline studies of the clay minerals society source clays: infrared methods10.1346/CCMN.2001.0490502 ↗
26. Elaboration of geopolymer binders from poor kaolin and dam sludge waste10.1016/j.heliyon.2019.e01938 ↗
27. Characterization of kaolin intercalates of oleochemicals derived from rubber seed (Hevea brasiliensis) and tea seed (Camelia sinensis) oils10.1016/j.jksus.2012.11.004 ↗
28. Preparation and application of alkali-activated materials based on waste glass and coal gangue: a review10.1016/j.conbuildmat.2019.06.071 ↗
29. Assessment of properties of metakaolin-based geopolymers applied in the conservation of tile facades10.1016/j.conbuildmat.2020.119759 ↗
30. Modeling the compressive strength of metakaolin-based geopolymers based on the statistical analysis of experimental data
31. Comparative study of laterite and metakaolin/hematite-based geopolymers: effect of iron source and alkalization
32. Mitigation of efflorescence, drying shrinkage and water demand of calcined clay-based geopolymers with biological waste ashes as activator and hardener
33. ONU · 2022
34. Eco-friendly geopolymer prepared from solid wastes: a critical review10.1016/j.chemosphere.2020.128900 ↗
35. Physical and thermal properties analysis of hematite for thermal heat storage
36. Geopolymers as an alternative to Portland cement: an overview10.1016/j.conbuildmat.2019.117455 ↗
37. High strength metakaolin/epoxy hybrid geopolymers: synthesis, characterization and mechanical properties
38. A novel study on the influence of cork waste residue on metakaolin-zeolite based geopolymers10.1016/j.clay.2017.11.013 ↗
39. Combined influence of low-grade metakaolins and natural zeolite on compressive strength and heavy metal adsorption of geopolymers10.3390/min11050486 ↗
40. Reappraisal review on geopolymer: a new era of aluminosilicate binder for metal immobilization
41. Geopolymer concrete as a cleaner construction material: an overview on materials and structural performances
42. Geopolymerization reaction, microstructure and simulation of metakaolin-based geopolymers at extended Si/Al ratios10.1016/j.cemconcomp.2017.01.014 ↗
43. Properties of lightweight fly ash geopolymer concrete containing bottom ash as aggregates FA10.1016/j.conbuildmat.2016.02.135 ↗
44. Microstructure and mechanical properties of metakaolin-based geopolymer composites containing high volume of spodumene tailings
45. Review on the effect collision between hazardous metal ions and geopolymer as adsorbents or in situ stabilization/solidification
46. Quantitative kinetic and structural analysis of geopolymers. Part 1. The activation of metakaolin with sodium hydroxide10.1016/j.tca.2012.03.021 ↗