journal article·2026-03

Evaluation of Geometric Parameters of Volumetric Defects in Dielectric Coatings by the Electrospark Method of Nondestructive Testing (High-Voltage Spark Testing)

V. A. Syasko, A. S. Musikhin, I. S. Gnivush, M. S. Stepanova

Publisher page

Abstract

Abstract The paper examines the feasibility of detecting nonthrough defects (internal defects and interfacial defects at the metal-coating interface) in dielectric coatings using the electrospark method of nondestructive testing. It is shown that partial discharges, which induce a characteristic distortion of the test-voltage pulse, serve as an informative indicator of a coating defect. Based on an equivalent capacitive model of a coating with a defect, a relationship between the apparent charge and the geometry of the air gap is derived. The results are validated by numerical simulation of the electric-field distribution in COMSOL and by experiments on plexiglas specimens with blind holes of varying depth. An algorithm is proposed for extracting the partial-discharge signal using a weighted sum of increments in the root-mean-square deviations of the second derivative of the voltage. The obtained dependences make it possible to estimate the residual coating thickness in the defect region.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Surface Treatment and Coatings · Advanced Machining and Optimization Techniques · Electromagnetic Effects on Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Hellier, C., Handbook of Nondestructive Evaluation, Columbus: McGraw-Hill, 2003, no. 19496.
2. GOST (State Standard) 34395-2018: Paint Materials. Spark Test Method for Continuity Inspection of Dielectric Coatings on Conductive Substrates, Moscow: Standartinform, 2018.
3. Ibragimov, N.Yu. and Ibragimova, E.N., Flaw-detection system for measuring cracks in silicate pipe coatings, Defektoskopiya, 2017, vol. 53, no. 11, pp. 55–57.
4. ASTM D5162-08(2015): Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates, West Conshohocken, PA: ASTM Int., 2015.
5. NDT Resource Center, Spark Testing. https://www.nde-ed.org. Accessed December 10, 2025.
6. Mills, D.J. and Mabbutt, S., Investigation of defects in organic anti-corrosive coatings using electrochemical noise measurement, Prog. Org. Coat., 2000, vol. 39, no. 1, pp. 41–48. https://doi.org/10.1016/S0300-9440(00)00098-910.1016/S0300-9440(00)00098-9 ↗
7. Syas’ko, V.A. and Musikhin, A.S., The high voltages spark testing method for protective and functional dielectric coatings on a conductive substrate. Increasing sensitivity and results reliability, Proc. 58th Annu. Conf. Br. Inst. Nondestr. Test. NDT, 2019, vol. 58, pp. 265–274.
8. ASTM G62-14: Standard Test Methods for Holiday Detection in Pipeline Coatings, West Conshohocken, PA: ASTM Int., 2014.
9. ASTM D6747-15: Standard Guide for Selection of Techniques for Electrical Leak Location of Leaks in Geomembranes, West Conshohocken, PA: ASTM Int., 2015.
10. NACE SP0188-2006: Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates, Houston, TX: NACE Int., 2006.
11. Musikhin, A.S. and Syas’ko, V.A., Electrspark testing of the continuity of protective paint coatings, Mire NK, 2018, vol. 21, no. 2, pp. 42–45.
12. Danikas, M.G. and Morsalin, S., Foreign Inclusions, enclosed cavities, partial discharge models and discharge energy: a short review regarding solid dielectrics and composite insulating systems, Eng., Technol. Appl. Sci. Res., 2019, vol. 9, no. 5, pp. 4659–4666. https://doi.org/10.48084/etasr.295810.48084/etasr.2958 ↗
13. Musikhin, A.S., Electrospark testing of continuity and unacceptable thinning of dielectric coatings, Cand Sci. Dissertation, St. Petersburg, 2023.
14. Varviodov, V.N., Kovalev, D.I., Zhulikov, S.S., et al., Prevention of partial discharges in the solid insulation of high-voltage current conductors, Electr. Eng., 2021, no. 8, pp. 30–34. https://doi.org/10.3103/S106837122108012510.3103/S1068371221080125 ↗
15. Starikova, N.S. and Redko, V.V., Investigation of methods for controlling insulation integrity in the region of weak and strong electric fields, Vestn. Nauk. Sib., 2013, no. 3, pp. 55–59.
16. Syasko, V., Musikhin, A., and Gnivush, I., Improvement of methods and devices for multi-parameter high-voltage testing of dielectric coatings, Coatings, 2024, vol. 14, no. 4, p. 427. https://doi.org/10.3390/coatings1404042710.3390/coatings14040427 ↗
17. IEC 60270:2000. High-Voltage Test Techniques: Partial Discharge Measurements, Geneva: IEC, 2000.
18. Sergeev, I.I., On the measurement of partial discharges, Energetik, 2016, no. 9, pp. 41–46.
19. Martínez-Tarifa, J.M., Granado, J., and Robles, G., Efficient metrics for the detection of partial discharges under steep-fronted voltage pulses, Int. J. Electr. Power Energ. Syst., 2022, vol. 141, p. 108159. https://doi.org/10.1016/j.ijepes.2022.10815910.1016/j.ijepes.2022.108159 ↗
20. Heckert, N.A., Filliben, J.J., Croarkin, C.M., et al., Handbook 151: NIST/SEMATECH e-Handbook of Statistical Methods, Gaithersburg, MD: NIST, 2002.