A two-step technique for tensile strength of montmorillonite/polymer nanocomposites assuming filler morphology and interphase properties
Source abstract
Abstract
Abstract This paper presents a two-step methodology for prediction of tensile strength in montmorillonite/polymer nanocomposites (MPN) assuming the effects of montmorillonite morphology (intercalation/exfoliation) and interphase properties. The suggested technique is evaluated by the experimental data of tensile strength in some samples. A good agreement is shown between experimental measurements and predictions, which can determine the intercalation/exfoliation level and interphase properties. A high aspect ratio of Mt platelets increases the interfacial interaction and mechanical involvement between polymer chains and nanoparticles causing high strengthening effect. Moreover, high concentration of well-exfoliated Mt as well as thick and strong interphase produces desirable tensile strength in MPN.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · Polymer crystallization and properties · Polymer Nanocomposite Synthesis and Irradiation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. A study on sustained release formulations for oral delivery of 5-fluorouracil based on alginate–chitosan/montmorillonite nanocomposite systems10.1016/j.clay.2014.09.004 ↗
2. Sepiolite needle-like clay for PA6 nanocomposites: an alternative to layered silicates?10.1016/j.compscitech.2009.07.016 ↗
3. Chemical modification of palygorskite with maleic anhydride modified polypropylene: mechanical properties, morphology, and crystal structure of palygorskite/polypropylene nanocomposites10.1016/j.clay.2015.07.012 ↗
4. Polymer nanocomposites: the “nano” effect on mechanical properties10.1080/15583720701271278 ↗
5. Properties and ultrafiltration efficiency of cellulose acetate/organically modified Mt (CA/OMMt) nanocomposite membrane for humic acid removal10.1016/j.clay.2014.11.042 ↗
6. Intercalated linear low density polyethylene (LLDPE)/clay nanocomposites prepared with oxidized polyethylene as a new type compatibilizer: structural, mechanical and barrier properties10.1016/j.eurpolymj.2007.06.019 ↗
7. Nylon 6 nanocomposites: the effect of matrix molecular weight10.1016/S0032-3861(01)00552-3 ↗
8. Effect of sodium montmorillonite source on nylon 6/clay nanocomposites10.1016/j.polymer.2004.01.061 ↗
9. Nanocomposites based on natural rubber, organoclay and nano-calcium carbonate: study on the structure, cure behavior, static and dynamic-mechanical properties10.1016/j.clay.2015.11.001 ↗
10. Effects of organoclay on the compatibility and interfacial phenomena of PE/EVA blends with UCST phase behavior10.1002/pc.22898 ↗
11. Dependence of the Pukánszky's interaction parameter B on the interface shear strength (IFSS) of nanofiller-and short fiber-reinforced polymer composites10.1016/j.compscitech.2014.01.002 ↗
12. PP/clay nanocomposites prepared by grafting-melt intercalation10.1016/S0032-3861(01)00561-4 ↗
13. Polypropylene/montmorillonite nanocomposites. Review of the synthetic routes and materials properties10.1021/cm0110627 ↗
14. Morphology and rheology of (styrene-butadiene rubber/acrylonitrile-butadiene rubber) blends filled with organoclay: the effect of nanoparticle localization10.1016/j.clay.2015.02.012 ↗
15. Investigation of the interphase effects on the mechanical behavior of carbon nanotube polymer composites by multiscale modeling10.1002/app.31460 ↗
16. The fabrication of syndiotactic polystyrene/organophilic clay nanocomposites and their properties10.1016/S0032-3861(01)00213-0 ↗
17. Effect of clay modifier on morphology, thermal properties and flammability of newly synthesized poly (sulfide–sulfone–amide)10.1016/j.clay.2015.02.020 ↗
18. Influence of ordering and disordering of organoclay on rheological properties of uncured and cured ethylene-octene copolymer nanocomposites10.1016/j.clay.2016.09.021 ↗
19. Utilization of natural montmorillonite modified with dimethyl, dehydrogenated tallow quaternary ammonium salt as reinforcement in almond shell flour–polypropylene bio-nanocomposites10.1016/j.compositesb.2014.11.009 ↗
20. Assumption of interphase properties in classical Christensen–Lo model for Young's modulus of polymer nanocomposites reinforced with spherical nanoparticles10.1039/C5RA19330C ↗
21. Development of Halpin-Tsai model for polymer nanocomposites assuming interphase properties and nanofiller size10.1016/j.polymertesting.2016.02.010 ↗
22. Development of Nicolais–Narkis model for yield strength of polymer nanocomposites reinforced with spherical nanoparticles10.1016/j.ijadhadh.2016.07.006 ↗
23. Effects of imperfect interfacial adhesion between polymer and nanoparticles on the tensile modulus of clay/polymer nanocomposites10.1016/j.clay.2016.05.002 ↗
24. “a” interfacial parameter in Nicolais–Narkis model for yield strength of polymer particulate nanocomposites as a function of material and interphase properties10.1016/j.jcis.2016.02.035 ↗
25. A model for tensile strength of polymer/clay nanocomposites assuming complete and incomplete interfacial adhesion between the polymer matrix and nanoparticles by the average normal stress in clay platelets10.1039/C6RA04132A ↗
26. Modeling approach for tensile strength of interphase layers in polymer nanocomposites10.1016/j.jcis.2016.03.029 ↗
27. The roles of nanoparticles accumulation and interphase properties in properties of polymer particulate nanocomposites by a multi-step methodology10.1016/j.compositesa.2016.10.003 ↗
28. Shear, bulk, and Young's moduli of clay/polymer nanocomposites containing the stacks of intercalated layers as pseudoparticles10.1186/s11671-016-1703-3 ↗
29. Study of nanoparticles aggregation/agglomeration in polymer particulate nanocomposites by mechanical properties10.1016/j.compositesa.2016.01.020 ↗
30. A two-step method based on micromechanical models to predict the Young's modulus of polymer nanocomposites10.1002/mame.201600010 ↗
31. An approach to study the roles of percolation threshold and interphase in tensile modulus of polymer/clay nanocomposites10.1016/j.jcis.2016.09.080 ↗
32. Accounting the reinforcing efficiency and percolating role of interphase regions in the tensile modulus of polymer/CNT nanocomposites10.1016/j.eurpolymj.2017.01.007 ↗
33. Development of Hashin-Shtrikman model to determine the roles and properties of interphases in clay/CaCO3/PP ternary nanocomposite10.1016/j.clay.2016.12.033 ↗
34. The mechanical behavior of CNT reinforced nanocomposites assuming imperfect interfacial bonding between matrix and nanoparticles and percolation of interphase regions10.1016/j.compscitech.2017.03.012 ↗
35. Efficiency of stress transfer between polymer matrix and nanoplatelets in clay/polymer nanocomposites10.1016/j.clay.2017.03.043 ↗
36. Influences of nanoparticles aggregation/agglomeration on the interfacial/interphase and tensile properties of nanocomposites10.1016/j.compositesb.2017.04.008 ↗
37. Influence of interlayer functionalization of kaolinite on property profile of copolymer nanocomposites10.1016/j.clay.2015.04.010 ↗