journal article·2022-04-08Open access

Integrating pore architectures to evaluate vascularization efficacy in silicate-based bioceramic scaffolds

Fanghui Wu, Jun Yang, Xiurong Ke, Shuo Ye, Zhaonan Bao, Xianyan Yang, Cheng Zhong, Miaoda Shen, Sanzhong Xu, Lei Zhang, Zhongru Gou, Guojing Yang

Abstract

Abstract Pore architecture in bioceramic scaffolds plays an important role in facilitating vascularization efficiency during bone repair or orbital reconstruction. Many investigations have explored this relationship but lack integrating pore architectural features in a scaffold, hindering optimization of architectural parameters (geometry, size and curvature) to improve vascularization and consequently clinical outcomes. To address this challenge, we have developed an integrating design strategy to fabricate different pore architectures (cube, gyroid and hexagon) with different pore dimensions (∼350, 500 and 650 μm) in the silicate-based bioceramic scaffolds via digital light processing technique. The sintered scaffolds maintained high-fidelity pore architectures similar to the printing model. The hexagon- and gyroid-pore scaffolds exhibited the highest and lowest compressive strength (from 15 to 55 MPa), respectively, but the cube-pore scaffolds showed appreciable elastic modulus. Moreover, the gyroid-pore architecture contributed on a faster ion dissolution and mass decay in vitro. It is interesting that both μCT and histological analyses indicate vascularization efficiency was challenged even in the 650-μm pore region of hexagon-pore scaffolds within 2 weeks in rabbit models, but the gyroid-pore constructs indicated appreciable blood vessel networks even in the 350-μm pore region at 2 weeks and high-density blood vessels were uniformly invaded in the 500- and 650-μm pore at 4 weeks. Angiogenesis was facilitated in the cube-pore scaffolds in comparison with the hexagon-pore ones within 4 weeks. These studies demonstrate that the continuous pore wall curvature feature in gyroid-pore architecture is an important implication for biodegradation, vascular cell migration and vessel ingrowth in porous bioceramic scaffolds.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Intracranial Aneurysms: Treatment and Complications · Dental Implant Techniques and Outcomes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Orthopaedics, The Third Hospital Affiliated to Wenzhou Medical University & Rui’an People’s Hospital , Rui’an 325200, China

Bio-nanomaterials and Regenerative Medicine Research Division, Zhejiang-California International Nanosystem Institute, Zhejiang University , Hangzhou 310058, China

Department of Orthopaedics, The First Affiliated Hospital, School of Medicine of Zhejiang University , Hangzhou 310003, China

Funding

National Key Research and Development Program of China · National Natural Science Foundation of China · Zhejiang Provincial Natural Science Foundation of China · Medical and Health Research Project of Zhejiang Province

References (45)

Show source-provided references
1. Fracture healing in osteoporotic bone10.1016/S0020-1383(16)47004-X ↗
2. The journey of multifunctional bone scaffolds fabricated from traditional toward modern techniques10.1007/s42242-020-00094-4 ↗
3. Functional relationship between osteogenesis and angiogenesis in tissue regeneration10.3390/ijms21093242 ↗
4. Role of angiogenesis in bone repair10.1016/j.abb.2014.07.006 ↗
5. A review of chitosan and its derivatives in bone tissue engineering10.1016/j.carbpol.2016.05.049 ↗
6. Calcium phosphate ceramics in bone tissue engineering: a review of properties and their influence on cell behavior10.1016/j.actbio.2013.06.014 ↗
7. Beta-CaSiO3/beta-Ca3(PO4)2 composite materials for hard tissue repair: in vitro studies10.1002/jbm.a.31390 ↗
8. Review on titanium and titanium based alloys as biomaterials for orthopaedic applications10.1016/j.msec.2019.04.064 ↗
9. Three-dimensional (3D) printed scaffold and material selection for bone repair10.1016/j.actbio.2018.11.039 ↗
10. Review on current limits and potentialities of technologies for biomedical ceramic scaffolds production10.1002/jbm.b.34706 ↗
11. Material and regenerative properties of an osteon-mimetic cortical bone-like scaffold10.1093/rb/rbz008 ↗
12. 3D-printed bioactive scaffolds from nanosilicates and PEOT/PBT for bone tissue engineering10.1093/rb/rby024 ↗
13. Digital light processing strength-strong ultra-thin bioceramic scaffolds for challengeable orbital bone regeneration and repair in Situ10.1016/j.apmt.2020.100889 ↗
14. 3D-printing of highly uniform CaSiO3 ceramic scaffolds: preparation, characterization and in vivo osteogenesis10.1039/c2jm30566f ↗
15. Effects of different aperture-sized type I collagen/silk fibroin scaffolds on the proliferation and differentiation of human dental pulp cells10.1093/rb/rbab028 ↗
16. Bone tissue regeneration: the role of finely tuned pore architecture of bioactive scaffolds before clinical translation
17. In vitro assessment of three-dimensionally plotted nagelschmidtite bioceramic scaffolds with varied macropore morphologies10.1016/j.actbio.2013.09.011 ↗
18. Porosity of 3D biomaterial scaffolds and osteogenesis10.1016/j.biomaterials.2005.02.002 ↗
19. A review of bioceramic porous scaffolds for hard tissue applications: effects of structural features10.1016/j.ceramint.2020.03.192 ↗
20. The correlation between the internal structure and vascularization of controllable porous bioceramic materials in vivo: a quantitative study10.1089/ten.tea.2010.0148 ↗
21. Ectopic osteogenesis and angiogenesis regulated by porous architecture of hydroxyapatite scaffolds with similar interconnecting structure in vivo10.1093/rb/rbw031 ↗
22. Impact of pore size on the vascularization and osseointegration of ceramic bone substitutes in vivo10.1002/jbm.a.31559 ↗
23. Bone tissue regeneration: the role of scaffold geometry10.1039/C4BM00291A ↗
24. Rational design of bioceramic scaffolds with tuning pore geometry by stereolithography: microstructure evaluation and mechanical evolution10.1016/j.jeurceramsoc.2020.10.002 ↗
25. Effects of the architecture of tissue engineering scaffolds on cell seeding and culturing10.1016/j.actbio.2010.06.012 ↗
26. Fabrication aspects of porous biomaterials in orthopedic applications: a review10.1021/acsbiomaterials.7b00615 ↗
27. Mathematically defined tissue engineering scaffold architectures prepared by stereolithography10.1016/j.biomaterials.2010.05.068 ↗
28. Digital light processing stereolithography of hydroxyapatite scaffolds with bone-like architecture, permeability, and mechanical properties10.1111/jace.17843 ↗
29. Simultaneous mechanical property and biodegradation improvement of wollastonite bioceramic through magnesium dilute doping10.1016/j.jmbbm.2015.09.012 ↗
30. Heterogeneous minimal surface porous scaffold design using the distance field and radial basis functions10.1016/j.medengphy.2012.03.009 ↗
31. Synthetic bone: design by additive manufacturing10.1016/j.actbio.2019.07.049 ↗
32. Rational design and fabrication of porous calcium-magnesium silicate constructs that enhance angiogenesis and improve orbital implantation10.1021/acsbiomaterials.6b00282 ↗
33. Angiogenesis and new bone formation in novel unidirectional porous beta-tricalcium phosphate: a histological study10.1007/s10047-019-01120-8 ↗
34. Current trends in the design of scaffolds for computer-aided tissue engineering10.1016/j.actbio.2013.10.024 ↗
35. Additively manufactured open-cell porous biomaterials made from six different space-filling unit cells: the mechanical and morphological properties10.3390/ma8041871 ↗
36. Angiogenesis in fracture repair10.1097/00003086-199810001-00010 ↗
37. Biomaterials for orbital implants and ocular prostheses: overview and future prospects10.1016/j.actbio.2013.12.014 ↗
38. Orbital implants: state-of-the-art review with emphasis on biomaterials and recent advances10.1016/j.msec.2016.08.003 ↗
39. The correlation of pore morphology, interconnectivity and physical properties of 3D ceramic scaffolds with bone ingrowth10.1016/j.biomaterials.2008.10.056 ↗
40. Neovascularization in biodegradable inverse opal scaffolds with uniform and precisely controlled pore sizes10.1002/adhm.201200106 ↗
41. Fabrication of poly-DL-lactide/polyethylene glycol scaffolds using the gas foaming technique10.1016/j.actbio.2011.09.028 ↗
42. Manufacture of macroporous β-tricalcium phosphate bioceramics10.1016/j.jeurceramsoc.2007.05.025 ↗
43. Fabrication and characterization of porous poly(L-lactide) scaffolds using solid-liquid phase separation10.1007/s10856-008-3366-9 ↗
44. Porous scaffold design for tissue engineering10.1038/nmat1421 ↗
45. Ceramic robocasting: recent achievements, potential, and future developments10.1002/adma.201802404 ↗