journal article·2025-10

Flexibly Reinforced Polycaprolactone Bioelectrodes for Piezoresistive Sensing via Direct Ink Writing

Yongpeng Wu, Jiabin Liu, Ronghan He, Xianwei Wang, Pan Xu, Nan Lin, Swee Hin Teoh, Chao Ma, Zuyong Wang

Publisher page

Abstract

ABSTRACT Poly(ε‐caprolactone) (PCL) is a biodegradable polyester known for its low melting point and high flexibility, making it ideal for various medical device applications. In this study, we introduce a conductive nanocarbon black‐blended PCL as a reinforced ink for fabricating flexible and degradable piezoresistive bioelectrodes. This approach enables the creation of a piezoresistive bioelectrode optimized for precise biomechanical sensing. The bioelectrode exhibits exceptional mechanoelectrical stability under high tension (> 350%), repeated drawing (> 40%, 100 cycles), long‐term bending (> 7000 cycles), extrusion (> 10,000 cycles), and torsion (> 90°). When assembled into flexible piezoresistive sensors, the sensor achieves a high sensitivity (2.66 kPa −1 in the range of 0–3 kPa), along with excellent repeatability and durability (10,000 cycles at 5 N). The sensor has promising applications in human health monitoring, including finger, wrist, and elbow activity tracking, as well as knee joint space sensing for guiding precise surgical operations.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications · Tactile and Sensory Interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Materials Science and Engineering Hunan University Changsha People's Republic of China

Department of Joint and Trauma Surgery The Third Affiliated Hospital of Sun Yat‐Sen University Guangzhou China

Department of Vascular Surgery Xiangya Hospital, Central South University Changsha People's Republic of China

References (35)

Show source-provided references
1. 10.3390/polym1509217610.3390/polym15092176 ↗
2. 10.1002/adem.20200118710.1002/adem.202001187 ↗
3. 10.1039/D2MA00987K10.1039/D2MA00987K ↗
4. 10.1021/acssensors.2c0094210.1021/acssensors.2c00942 ↗
5. 10.1080/15583724.2021.190173710.1080/15583724.2021.1901737 ↗
6. 10.1002/adma.20190195810.1002/adma.201901958 ↗
7. 10.1021/acsami.9b0371810.1021/acsami.9b03718 ↗
8. 10.1002/adma.20130295010.1002/adma.201302950 ↗
9. 10.1039/C4NR00265B10.1039/C4NR00265B ↗
10. 10.1002/advs.20220050710.1002/advs.202200507 ↗
11. 10.3390/coatings1205055810.3390/coatings12050558 ↗
12. 10.1038/srep0361210.1038/srep03612 ↗
13. 10.3390/polym1509215910.3390/polym15092159 ↗
14. 10.1007/978-3-030-54334-1_610.1007/978-3-030-54334-1_6 ↗
15. 10.1002/ente.20180031810.1002/ente.201800318 ↗
16. 10.7567/JJAP.57.05GB0210.7567/JJAP.57.05GB02 ↗
17. 10.1016/j.jpowsour.2009.06.05410.1016/j.jpowsour.2009.06.054 ↗
18. 10.1021/acsami.8b0521510.1021/acsami.8b05215 ↗
19. 10.1039/D3NJ04802K10.1039/D3NJ04802K ↗
20. 10.3390/s2010290810.3390/s20102908 ↗
21. 10.1089/ten.tec.2012.047210.1089/ten.tec.2012.0472 ↗
22. 10.1016/S0142-9612(00)00101-010.1016/S0142-9612(00)00101-0 ↗
23. High‐Resolution 3D Printing for Electronics
24. 10.1007/s10853-025-10592-410.1007/s10853-025-10592-4 ↗
25. 10.1080/10667857.2024.233204010.1080/10667857.2024.2332040 ↗
26. 10.1016/j.compscitech.2022.10976510.1016/j.compscitech.2022.109765 ↗
27. 10.29026/oea.2022.21002910.29026/oea.2022.210029 ↗
28. 10.1080/10667857.2022.207260710.1080/10667857.2022.2072607 ↗
29. 10.1109/JSEN.2024.336790010.1109/JSEN.2024.3367900 ↗
30. 10.1016/j.jcis.2022.03.01310.1016/j.jcis.2022.03.013 ↗
31. 10.1021/acsami.2c0657410.1021/acsami.2c06574 ↗
32. 10.1021/acsapm.4c0196710.1021/acsapm.4c01967 ↗
33. 10.1016/j.apmt.2024.10241110.1016/j.apmt.2024.102411 ↗
34. 10.1007/s10570-021-04293-910.1007/s10570-021-04293-9 ↗
35. 10.1021/nn405887k10.1021/nn405887k ↗