Architecture control of three‐dimensional polymeric scaffolds for soft tissue engineering. I. Establishment and validation of numerical models

Abstract One of the most important functions of artificial three‐dimensional (3D) polymeric scaffolds is to serve as a physical support to provide tissues with an appropriate architecture for in vitro cell culture as well as in vivo tissue regeneration. The production of three‐dimensional (3D) polymeric scaffolds with tailored macroporous architecture is thus a crucial step in promoting controlled vascularization and tissue growth within host environments. In this study, 3D poly(lactic‐co‐glycolic acid) (PLGA) scaffolds were manufactured by a thermally induced phase‐separation (TIPS) technique. By controlling the quenching strategy, 3D interconnected PLGA scaffolds with tunable pore size and alignment were obtained and characterized with the use of scanning electron microscopy (SEM). A series of numerical heat‐transfer models were established in an effort to describe the cooling process within the PLGA freezing regime. Among them, a two‐dimensional (2D) solidification model has proved to be the most successful in describing the quenching of the polymer solution and has the potential to be used to infer the various 3D macroporous architectures created from different quenching conditions. © 2004 Wiley Periodicals, Inc. J Biomed Mater Res 71A: 81–89, 2004