A comprehensive review on 3D concrete printing: extruder design, material properties and reinforcement techniques
Source abstract
Abstract
Purpose This review systematically examines advancements in extrusion systems, reinforcement integration and material optimization for 3D concrete printing (3DCP), addressing critical challenges such as printability, structural integrity and scalability. It aims to synthesize innovations in extruder design, evaluate reinforcement strategies and assess material modifications. This study aims to identify persistent technical barriers and proposes future research directions to advance 3DCP as a viable solution for large-scale, sustainable construction. Design/methodology/approach A structured review methodology was used, beginning with a comprehensive database search and then eligibility screening and analysis of peer-reviewed articles. The review focuses on three domains – extruder mechanisms, reinforcement techniques and material systems. Findings In 3DCP, extruder advancements enhance performance through progressive cavity pumps with variable clearance and dual-pitch screws, optimizing material flow and pressure. Screw extruders with excitatory blades counter thixotropic behavior, while conical designs minimize air entrapment. Tapered hoppers ensure consistent mass flow, reducing phase separation and dead zones for stable non-Newtonian concrete extrusion. Reinforcement strategies include short fibers for improved ductility, continuous steel cables for significantly enhanced flexural strength and U-nail insertion for stronger interlayer bonding. Material innovations involve chemically modified mortars for better setting time and an inline mixing system that enables rapid material stiffening for large-scale or vertical construction. Some challenges include rheological instability, reinforcement-material incompatibility, scalability limitations and energy-intensive dynamic mixing. Originality/value The critical analysis of the extruder for the 3DCP system and mechanisms described in this review paper is the originality of this article.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Innovations in Concrete and Construction Materials · Additive Manufacturing and 3D Printing Technologies · BIM and Construction Integration
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Indian Institute of Technology Guwahati Centre for Intelligent Cyber Physical Systems, , Guwahati,
Indian Institute of Technology Guwahati Department of Mechanical Engineering, , Guwahati,
Indian Institute of Technology Guwahati Centre for Intelligent Cyber Physical Systems, , Guwahati, , and Department of Mechanical Engineering, Indian Institute of Technology Guwahati, Guwahati, India
Funding
IITG Technology Innovation and Development Foundation
References (100+)
Show source-provided references
1. Development of an in-process reinforcement method in 3d concrete printing with nitinol shape memory alloy10.20868/ade.2023.5373 ↗
2. A review of ‘3D concrete printing’: materials and process characterization, economic considerations and environmental sustainability10.1016/j.jobe.2023.105863 ↗
3. A review of large-scale 3DCP: material characteristics, mix design, printing process, and reinforcement strategies10.1016/j.istruc.2022.06.068 ↗
4. On-demand additive manufacturing of functionally graded concrete10.1080/17452759.2019.1709009 ↗
5. The state of 3D concrete printing: current applications and future opportunities
6. 3D concrete printing: recent progress, applications, challenges, and role in achieving sustainable development goals10.3390/buildings13040924 ↗
7. Effective extrusion-based 3D printing system design for cementitious-based materials10.1016/j.rineng.2020.100135 ↗
8. A 3D concrete printing prefabrication platform for bespoke columns10.1016/j.autcon.2020.103467 ↗
9. Review of advances in 3D printing technology of cementitious materials: key printing parameters and properties characterization10.3390/buildings13071828 ↗
10. Development of 3D-printable ultra-high-performance fiber-reinforced concrete for digital construction10.1016/j.conbuildmat.2020.119546 ↗
11. Becerra · 2021 · 02014
12. Benbow · 1993
13. Bhattacherjee · 2020 · 1310.1007/978-3-030-49916-7_2 ↗
14. Experimental exploration of metal cable as reinforcement in 3D printed concrete10.3390/ma10111314 ↗
15. Bos · 2018 · 248410.1007/978-3-319-59471-2_283 ↗
16. Ductility of 3D printed concrete reinforced with short straight steel fibers10.1080/17452759.2018.1548069 ↗
17. Bos · 2020 · 58410.1007/978-3-030-49916-7_60 ↗
18. Bos · 202010.1007/978-3-030-49916-7_60 ↗
19. Additive manufacturing of concrete in construction: potentials and challenges of 3D concrete printing10.1080/17452759.2016.1209867 ↗
20. The single screw extrusion of pastes10.1016/0009-2509(95)00107-G ↗
21. 3D printing using concrete extrusion: a roadmap for research10.1016/j.cemconres.2018.05.006 ↗
22. Study of moineau-based pumps for the volumetric extrusion of pellets10.1016/j.addma.2017.08.015 ↗
23. 3D printing of mortar with continuous fibres: principle, properties and potential for application10.1016/j.autcon.2021.103806 ↗
24. Reinvent reinforced concrete with robotics and 3D printing
25. Piston press extrusion as a low-cost screening tool for cementitious formulations in 3D concrete printing10.20935/AcadEng8136 ↗
26. Analysis of shear and thermal history during co-rotating twin-screw extrusion10.1111/j.1365-2621.1991.tb05317.x ↗
27. A review of the extruder system design for large-scale extrusion-based 3D concrete printing10.3390/ma16072661 ↗
28. Use of creep and recovery protocol to assess the printability of fiber-reinforced 3D printed white Portland cement composites10.1080/17452759.2024.2331201 ↗
29. Chen, Y. (2021), “Investigation of limestone-calcined clay-based cementitious materials for sustainable 3D concrete printing”, Ph.D. Thesis, doi: 10.4233/UUID:A0D9289B-9F24-4805-86AB-09F12714A946.10.1016/j.cemconres.2021.106553 ↗
30. Improving printability of limestone-calcined clay-based cementitious materials by using viscosity-modifying admixture10.1016/j.cemconres.2020.106040 ↗
31. Steel fiber orientational distribution and effects on 3D printed concrete with coarse aggregate10.1617/s11527-022-01943-7 ↗
32. The improvement of durability of reinforced concretes for sustainable structures: a review on different approaches10.3390/ma15082728 ↗
33. Influence of protein concentration on the physical characteristics and flow properties of milk protein concentrate powders10.1016/j.jfoodeng.2014.03.005 ↗
34. Pumping of fresh concrete: insights and challenges10.21809/rilemtechlett.2016.15 ↗
35. Active control of properties of concrete: a (p)review10.1617/s11527-018-1256-2 ↗
36. Dimensional analysis for planetary mixer: mixing time and reynolds numbers10.1016/j.ces.2006.11.039 ↗
37. Flow-based pultrusion of continuous fibers for cement-based composite material and additive manufacturing: rheological and technological requirements10.1016/j.compstruct.2021.113564 ↗
38. A study into the effect of material deposition methods on hardened properties of 3D printed concrete10.1016/j.matpr.2023.03.034 ↗
39. Interlayer bonding performance of 3D printed engineered cementitious composites (ECC): rheological regulation and fiber hybridization10.1016/j.cemconcomp.2024.105805 ↗
40. Working mechanism of calcium nitrate as an accelerator for Portland cement hydration10.1111/jace.18782 ↗
41. The effect of accelerator dosage on fresh concrete properties and on interlayer strength in shotcrete 3D printing10.3390/ma13020374 ↗
42. Large-scale robotic extrusion-based additive manufacturing with living mycelium materials10.1016/j.sftr.2022.100085 ↗
43. Pumping of concrete: understanding a common placement method with lots of challenges10.1016/j.cemconres.2022.106720 ↗
44. A study on blending characteristics of axial flow impellers10.2478/v10176-011-0025-3 ↗
45. Optimal design of single-screw extruder for liquorice candy production: a rheology-based approach10.1016/S0260-8774(00)00140-0 ↗
46. Advancement in sustainable 3D concrete printing: a review on materials, challenges, and current progress in Australia10.3390/buildings14020494 ↗
47. Aligned interlayer fiber reinforcement and post-tensioning as a reinforcement strategy for digital fabrication
48. Structural behaviour of 3D printed concrete beams with various reinforcement strategies10.1016/j.engstruct.2021.112380 ↗
49. Simultaneous reinforcement of concrete while 3D printing
50. 3D printing of ultra-high-performance concrete: shape stability for various printing systems10.1016/j.conbuildmat.2024.139039 ↗
51. Large-scale 3D printing of ultra-high-performance concrete – a new processing route for architects and builders10.1016/j.matdes.2016.03.097 ↗
52. Properties of 3D-printed fiber-reinforced Portland cement paste10.1016/j.cemconcomp.2017.02.001 ↗
53. Additive manufacturing of cementitious composites: materials, methods, potentials, and challenges10.1016/j.conbuildmat.2019.05.140 ↗
54. Thermal conductivity of 3D printed concrete with recycled fine aggregate composite phase change materials10.1016/j.jclepro.2022.132598 ↗
55. Study on the mechanical properties of 3D printing concrete layers and the mechanism of influence of printing parameters10.1016/j.conbuildmat.2022.127496 ↗
56. Prediction model of compressive strength development of fly-ash concrete10.1016/j.cemconres.2004.04.009 ↗
57. Sewing concrete device – combining in-line rheology control and reinforcement system for 3D concrete printing10.3390/ma16145110 ↗
58. Jayathilakage · 2020 · 29010.1007/978-3-030-49916-7_30 ↗
59. Screw-assisted 3D printing with granulated materials: a systematic review10.1007/s00170-021-07365-z ↗
60. Design and validation of an innovative 3D printer containing a co-rotating twin screw extrusion unit10.1016/j.addma.2022.103192 ↗
61. Kaiser · 2022
62. Techniques and strategies in extrusion-based 3D concrete printing of complex components to prevent premature failure10.1016/J.AUTCON.2024.105768 ↗
63. Kazadi · 202310.1007/978-981-19-5217-3_39 ↗
64. Kenny, C. (2007), “Construction, corruption, and developing countries”, World Bank policy research working paper, available at:Link to the cited article. (accessed9 April 2026).10.1596/1813-9450-4271 ↗
65. Additive manufacturing in the construction industry: he comparative competitiveness of 3D concrete printing10.3390/app11093865 ↗
66. Automated construction by contour crafting – related robotics and information technologies10.1016/j.autcon.2003.08.012 ↗
67. Shape fidelity and structure of 3D printed high consistency nanocellulose10.1038/s41598-019-40469-x ↗
68. Interaction of reinforcement, process, and form in digital fabrication with concrete10.1016/j.cemconres.2024.107640 ↗
69. Mechanical improvement of continuous steel micro cable reinforced geopolymer composites for 3D printing subjected to different loading conditions10.1016/j.compositesb.2020.107796 ↗
70. Strength and ductility enhancement of 3D printing structure reinforced by embedding continuous micro-cables10.1016/j.conbuildmat.2020.120196 ↗
71. Modelling curved-layered printing paths for fabricating large-scale construction components10.1016/j.addma.2016.06.004 ↗
72. 3D-printed concrete with recycled glass: effect of glass gradation on flexural strength and microstructure10.1016/j.conbuildmat.2021.125561 ↗
73. Investigation of steel wire mesh reinforcement method for 3D concrete printing10.1007/s43452-021-00183-w ↗
74. Steel cable bonding in fresh mortar and 3D printed beam flexural behavior10.1016/j.autcon.2023.105165 ↗
75. Axial performances of the steel rebar rein forced column confined by the steel cable reinforced 3D concrete printing permanent formwork10.1080/17452759.2024.2382163 ↗
76. Technology readiness: a global snapshot of 3D concrete printing and the frontiers for development10.1016/j.cemconres.2022.106774 ↗
77. Printable properties of cementitious material containing copper tailings for extrusion-based 3D printing10.1016/j.conbuildmat.2017.12.051 ↗
78. A brief introduction to 3D printing technology
79. Continuous manufacturing via hot-melt extrusion and scale-up: regulatory matters10.1016/j.drudis.2016.11.007 ↗
80. Cost analysis for sustainable off-site construction based on a multiple-case study in China10.1016/j.habitatint.2016.08.002 ↗
81. Mesh reinforcing method for 3D concrete printing10.1016/j.autcon.2019.102992 ↗
82. A heuristic method for modeling three-dimensional non-Newtonian flows of polymer melts in single-screw extruders10.1016/j.jnnfm.2017.08.007 ↗
83. Inline reinforcement of steel cable in 3D concrete printing10.1016/j.matpr.2023.04.092 ↗
84. Maurya · 2025 · 13
85. Maurya · 2023 · 5910.1007/978-981-19-8452-5_5 ↗
86. Extrusion-based additive manufacturing with cement-based materials \u2013 production steps, processes, and their underlying physics: review10.1016/j.cemconres.2020.106037 ↗
87. Early age hydration, rheology and pumping characteristics of CSA cement-based 3D printable concrete10.1016/j.conbuildmat.2020.122136 ↗
88. Mount · 2024 · 31310.1016/B978-0-323-88667-3.00024-2 ↗
89. Development of concrete 3D printing
90. Effects of layer-interface properties on mechanical performance of concrete elements produced by extrusion-based 3D-printing10.1016/j.conbuildmat.2019.01.235 ↗
91. Additive manufacturing (3D printing): a review of materials, methods, applications and challenges10.1016/j.compositesb.2018.02.012 ↗
92. Modeling the design and performance of progressing cavity pump using 3-D vector approach10.1016/j.petrol.2014.07.009 ↗
93. Extent and mechanism of phase separation during the extrusion of calcium phosphate pastes10.1007/s10856-015-5615-z ↗
94. Parametric analysis and design of a screw extruder for slightly non-Newtonian (pseudoplastic) materials10.1016/j.jestch.2018.03.001 ↗
95. Current advances and future perspectives in extrusion-based bioprinting10.1016/j.biomaterials.2015.10.076 ↗
96. Pall, L. (2023), “New construction technologies used in 2023”, COBOD, available at:Link to the cited article.
97. Measurement of tensile bond strength of 3D printed geopolymer mortar10.1016/j.measurement.2017.08.051 ↗
98. Rheology and pumpability of mix suitable for extrusion-based concrete 3D printing – a review10.1016/j.conbuildmat.2023.132962 ↗
99. Nailing of layers: a promising way to reinforce concrete 3D printing structures10.3390/ma13071518 ↗
100. Extrusion of cement-based materials – an overview