journal article·2026-07-06

Experimental and analytical flexural analysis of steel and GFRP reinforced reactive powder concrete beams

Mohammad Ghafari Goushe, Abbas Darbhanzi

Publisher page

Abstract

Glass fiber-reinforced polymer (GFRP) bars, categorized as non-metallic materials, are being explored as a substitute for steel bars in concrete structures because of their strong tensile strength and long-term durability property. This research investigates the flexural and deflection response of reactive powder concrete (RPC) beams reinforced with 10 mm diameter steel and GFRP bars. In total, six RPC beams with 100 × 100 mm cross-sectional dimensions were tested under four-point lateral loading across a 300 mm bending span with simple support: two reinforced with GFRP bars, two reinforced with steel bars, and two without reinforcement. The tests indicated that both GFRP and steel bars led to a significant increase in lateral load capacity compared to the control beam by 183.25% and 134.06%, respectively. Additionally, reinforced beams showed marked improvements in energy absorption capacity, with steel and GFRP providing ∼200- and ∼270-fold enhancements, respectively, over the control specimen. Furthermore, the inclusion of GFRP and steel reinforcement altered the failure mode from bending to a combination of concrete crushing and diagonal tension. The experimental-to-theoretical moment capacity (M exp /M th ) demonstrated a strong dependence on reinforcement type, validating ACI provisions for steel-reinforced beams (mean = 1.09) but revealing non-conservative predictions for GFRP-reinforced beams (mean = 0.81).
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Masonry and Concrete Structural Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Vali-e-Asr University of Rafsanjan

References (57)

Show source-provided references
1. 10.1016/j.conbuildmat.2020.11928410.1016/j.conbuildmat.2020.119284 ↗
2. 10.1016/j.engstruct.2023.11703710.1016/j.engstruct.2023.117037 ↗
3. Dang W, Kubouchi M, Maruyama T, et al. Decomposition of GFRP in nitric acid and hydrogen peroxide solution for chemical recycling. Progress in rubber. Plast Recycl Technol 2002; 18(1): 49–68. https://doi.org/10.1177/147776060201800102
4. 10.1177/14777606130290040310.1177/147776061302900403 ↗
5. 10.1177/147776062097750010.1177/1477760620977500 ↗
6. 10.1177/1477760621106291210.1177/14777606211062912 ↗
7. 10.1016/j.conbuildmat.2021.12240710.1016/j.conbuildmat.2021.122407 ↗
8. 10.1016/j.istruc.2022.12.05510.1016/j.istruc.2022.12.055 ↗
9. 10.1016/j.dibe.2023.10028810.1016/j.dibe.2023.100288 ↗
10. 10.1080/14658011.2016.124580710.1080/14658011.2016.1245807 ↗
11. Ülger T, Cavuslu M. Durability and flexural behavior of concrete-filled hybrid GFRP beams with various interface treatments under humid environmental exposure. Case Stud Constr Mater 2025; 23: e04988. https://doi.org/10.1016/j.cscm.2025.e04988
12. 10.1016/j.revmat.2025.10003810.1016/j.revmat.2025.100038 ↗
13. 10.1016/j.istruc.2025.10847610.1016/j.istruc.2025.108476 ↗
14. Wang Y, Yao Z, Sushant S, et al. Bending performance of reactive powder concrete frame beams reinforced with steel-FRP composite bars. Case Stud Constr Mater 2025; 22: e04919. https://doi.org/10.1016/j.cscm.2025.e04219
15. 10.1089/3dp.2022.024310.1089/3dp.2022.0243 ↗
16. 10.1007/s42107-025-01330-x10.1007/s42107-025-01330-x ↗
17. Amiri SAA, Darbhanzi A. Experimental study on the elevated temperature performance of composite reactive powder concrete with polypropylene fiber-a case study. J Build Pathol Rehabil 2025; 10(67): 1–18.
18. Chen L, Tang Y. The effect of nickel‐plated multiwalled carbon nano tube fiber and graphite nanoparticle on the mechanical properties of reactive powder concrete and reactive powder geopolymer composite including slag, fly ash, metakaolin, and silica fume. Struct Concr 2025; 27: 1–22. https://doi.org/10.1002/suco.70305
19. 10.1680/jmacr.23.0019110.1680/jmacr.23.00191 ↗
20. 10.1016/j.conbuildmat.2023.13092210.1016/j.conbuildmat.2023.130922 ↗
21. 10.1016/j.conbuildmat.2023.13086210.1016/j.conbuildmat.2023.130862 ↗
22. 10.1007/s10973-024-13703-610.1007/s10973-024-13703-6 ↗
23. 10.1038/s41598-025-92097-310.1038/s41598-025-92097-3 ↗
24. 10.1007/s11709-025-1186-310.1007/s11709-025-1186-3 ↗
25. Zadeh KZ, Jamshidi M. Influence of steel and polypropylene fibers, nano-silica and heat curing on the performance of reactive powder concrete. Iran J Sci Technol, Trans Civ Eng 2025; 49(10): 1–17.
26. 10.1007/s41062-025-01940-z10.1007/s41062-025-01940-z ↗
27. 10.1002/suco.20210074610.1002/suco.202100746 ↗
28. 10.1002/suco.20220017210.1002/suco.202200172 ↗
29. Pezeshki Z, Shervani TB. Investigating the effect of replacing quartz powder with Alborz green tuff powder on the mechanical properties of reactive powder concrete in order to increase the capacity of building materials. J Concr Struct Mater 2024; 19(2): 1–19.
30. 10.1016/j.conbuildmat.2021.12367010.1016/j.conbuildmat.2021.123670 ↗
31. 10.3390/app1115701710.3390/app11157017 ↗
32. Lu X, Zhu Z, Mohibullah M, et al. Nonlinear analysis of flexural performance of reactive powder concrete beams reinforced with hybrid GFRP and steel bars. Case Stud Constr Mater 2022; 17: e01450. https://doi.org/10.1016/j.cscm.2022.e01450
33. 10.1515/eng-2022-043310.1515/eng-2022-0433 ↗
34. ASTM C188. Standard test method for density of hydraulic cement. ASTM International, 2016.
35. ASTM C204. Standard test methods for fineness of hydraulic cement by air-permeability apparatus. ASTM International, 2007.
36. ASTM C150. Standard specification for portland cement. ASTM International, 2009.
37. ASTM C1240. Standard specification for silica fume used in cementitious mixtures. ASTM International, 2003.
38. ASTM C2419. Standard test method for sand equivalent value of soils and fine aggregate. ASTM International, 2002.
39. ASTM C494. Standard specification for chemical admixtures for concrete. ASTM International, 2010.
40. ASTM D7205/D7205M. Standard test method for tensile properties of fiber reinforced polymer matrix composite bars. ASTM International, 2016.
41. ASTM E8/E8M. Standard test method for tension testing of metallic materials. ASTM International, 2013.
42. 10.1016/j.conbuildmat.2020.11959310.1016/j.conbuildmat.2020.119593 ↗
43. ASTM C1064. Standard test method for temperature of freshly mixed hydraulic-cement concrete. ASTM International, 2008.
44. ACI 305.1. Specification for hot weather concreting. American Concrete Institute, 2006.
45. ASTM C1437. Standard test method for flow of hydraulic cement mortar. ASTM International, 2007.
46. BS EN 12390-3. Testing hardened concrete: compressive strength of test specimens. BSI, 2009.
47. Kinjawadekar TA, Patil S, Nayak G. A critical review on glass fiber-reinforced polymer bars as reinforcement in flexural members. J Inst Eng 2023; 104(2): 501–516. https://doi.org/10.1007/s40030-023-00729-6
48. ASTM C 78. Standard test method for flexural strength of concrete (using simple beam with third-point loading). : American Concrete Institute, 2018.
49. 10.2478/ace-2018-007210.2478/ace-2018-0072 ↗
50. 10.1016/j.engstruct.2024.11761510.1016/j.engstruct.2024.117615 ↗
51. 10.1016/j.jobe.2017.02.00510.1016/j.jobe.2017.02.005 ↗
52. 10.3390/ma1405126810.3390/ma14051268 ↗
53. 10.3390/buildings1305115310.3390/buildings13051153 ↗
54. Rajakumari R, Chitra S. Bond strength of reactive powder concrete to GFRP reinforcement. TIJER. 2023; 10(5): 564–567.
55. ACI 363R. Report on high strength concrete. American Concrete Institute, 2010.
56. ACI 440. 1R, guide for the design and construction of structural concrete reinforced with FRP bars. American Concrete Institute, 2006.
57. ACI 318. Building code requirements for structural concrete. American Concrete Institute, 2019.