Synthesized of octahedral cupper chromite spinel for spectrally selective absorber (SSA) coatings
Source abstract
Abstract
Abstract In this study, cupper chromite Spinel (CuCr2O4) pigment was synthesized via two-step combustion–calcination procedure. Mixtures of citric acid and glycine were used as fuel and nitrate ions were used as oxidizers. The samples were synthesized at different pHs. The synthesized sample was characterized by x-ray diffraction, scanning electron microscopy, Fourier-transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), thermogravimetric analysis (TG) and energy-dispersive X-ray spectroscopy (EDX). The X-ray diffraction (XRD) patterns of the samples revealed that the single-phase CuCr2O4 spinel was formed. The SEM results showed that the spinel particles were synthesized in octahedral morphology. Furthermore, pH and amount of fuel have remarkable effect on size of particles. Increasing the pH leads to increasing the size of particles. Also, the size of particles was significantly increased by doubling the amount of fuel. In the next step, the synthesized pigments were used as spectrally selective absorber in solvent-based acrylic coatings. The functional groups of the coatings were identified by the attenuated total reflectance (ATR) analysis. The solar absorptance (αs) and the thermal emittance (eT) of the coatings were determined from the corresponding diffuse reflectance spectra. The optimum selective sample were calculated αs = 0.9 and et = 0.3.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Transition Metal Oxide Nanomaterials · TiO2 Photocatalysis and Solar Cells · Pigment Synthesis and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Gelin · 2004
2. Prediction of heat build-up of solar reflecting coatings based on physico-chemical properties of complex inorganic colour pigments (CICPs)10.1016/j.porgcoat.2011.02.008 ↗
3. Control of thermal emittance of stainless steel using sputtered tungsten thin films for solar thermal power applications10.1016/j.solmat.2014.11.002 ↗
4. Polymer-based pigmented coatings on flexible substrates with spectrally selective characteristics to improve the thermal properties10.1016/j.porgcoat.2010.09.024 ↗
5. Assessment and improvement of the performance of antisolar surfaces and coatings10.1016/j.porgcoat.2011.02.019 ↗
6. Solar absorber coatings based on CoCuMnOx spinels prepared via the sol–gel process: structural and optical properties10.1016/S0927-0248(02)00457-9 ↗
7. Kennedy · 2002
8. Synthesis and characterization of CoAl2O4 nano pigments by polyol method
9. Nano-copper chromite (nano-CuCr2O4): a novel and efficient catalyst for the synthesis of biscoumarin and pyrano[c]chromene derivatives in water at room temperature10.1007/s11164-015-2305-x ↗
10. Silicone-based thickness insensitive spectrally selective (TISS) paints as selective paint coatings for coloured solar absorbers (Part I)10.1016/j.solmat.2006.07.013 ↗
11. Selective paint coatings for coloured solar absorbers: polyurethane thickness insensitive spectrally selective (TISS) paints (Part II)10.1016/j.solmat.2006.07.012 ↗
12. Sol–gel combustion‐derived CoCuMnOx spinels as pigment for spectrally selective paints10.1111/j.1551-2916.2010.04182.x ↗
13. Facile synthesis of spinel CuCr2O4 nanoparticles and studies of their photocatalytic activity in degradation of some selected organic dyes10.1016/j.jallcom.2015.07.012 ↗
14. A pigment based on coprecipitated chromium(III) and copper(II) hydroxides10.1007/BF01166387 ↗
15. The promotion effect of Cr on copper catalyst in Hydrogenolysis of glycerol to propylene glycol10.1007/s11244-010-9480-1 ↗
16. Synthesis and characterisation of copper chromite nanoparticles using coprecipitation method10.1049/mnl.2011.0430 ↗
17. Synthesis, characterization and photocatalytic activity of cubic-like CuCr2O4 for dye degradation under visible light irradiation10.1016/j.apsusc.2014.07.158 ↗
18. Surfactant promoted synthesis of CuCr2O4 spinel nanoparticles: a recyclable catalyst for one-pot synthesis of acetophenone from ethylbenzene10.1021/ie5026634 ↗
19. Facile synthesis of CuCr2O4 spinel nanoparticles: a recyclable heterogeneous catalyst for the one pot hydroxylation of benzene10.1039/C4CY00615A ↗
20. Cu-Cr-O functionalized ETS-2 nanoparticles for hot gas desulfurization10.1166/jnn.2016.10666 ↗
21. Synthesis of copper chromite catalys10.1016/j.ast.2004.06.010 ↗
22. Developments in the synthesis of flat plate solar selective absorber materials via sol–gel methods: a review10.1016/j.rser.2014.04.062 ↗
23. A non-alkoxide sol–gel route to highly active and selective Cu Cr catalysts for glycerol conversion10.1039/B917546F ↗
24. Fabrication and characterization of CuCr2O4Nanocomposite by XRD, FESEM, FTIR, and DRS10.1080/15533174.2014.989591 ↗
25. Highly active copper chromite catalyst produced by thermal decomposition of ammoniac copper oxalate chromate10.1016/j.matlet.2005.07.041 ↗
26. The preparation of copper-chromium oxide catalysts for hydrogenation10.1021/ja01342a042 ↗
27. MCr2O4 (M=Co, Cu, and Zn) nanospinels for 2-propanol combustion: correlation of structural properties with catalytic performance and stability10.1016/j.ceramint.2013.05.033 ↗
28. Low-temperature combustion synthesis of CuCr2O4spinel powder for spectrally selective paints10.1007/s10971-011-2625-2 ↗
29. Study of correlation between activity and structural properties of Cu-(Cr, Mn and Co)2 nano mixed oxides in VOC combustion10.1016/j.ceramint.2013.11.068 ↗
30. Spectrally selective Cu1.5Mn1.5O4 spinel ceramic pigments for solar thermal applications10.1039/C6RA03300H ↗
31. Spectrally selective paint coatings: preparation and characterization10.1016/S0927-0248(00)00367-6 ↗
32. Spectrally selective solar absorbers in different non-black colours10.1016/j.solmat.2004.04.010 ↗
33. Synthesis of Mg2SiO4:Eu3+ by combustion method and investigating its luminescence properties10.1016/j.jallcom.2012.12.022 ↗
34. Lectrophoretic deposition and an investigation of co-dopants effect on luminescence property of Mg2SiO4:Eu3þ phosphors10.1016/j.jre.2017.05.013 ↗
35. ASTM G 173-03 · 2019
36. The CIE 1976 color‐Difference formulae10.1002/j.1520-6378.1977.tb00104.x ↗
37. Historical development of CIE recommended color difference equations10.1002/col.5080150308 ↗
38. Stuart · 2004
39. Sheibley · 2019
40. Infrared absorption spectra of metal oxides10.2116/bunsekikagaku.16.1050 ↗
41. Growth of magnesium aluminate nanocrystallites10.1039/C3CE41718B ↗
42. States in the gap10.1016/0022-3093(72)90194-9 ↗
43. Conduction in non-crystalline systems V. Conductivity, optical absorption and photoconductivity in amorphous semiconductors10.1080/14786437008221061 ↗
44. Investigation of surface structures of supported vanadium oxide catalysts by UV−vis−NIR diffuse reflectance spectroscopy10.1021/jp992867t ↗
45. Preparation and characterization of SnO2 nanoparticles by hydrothermal route10.1186/2228-5326-2-17 ↗
46. Nickel(II) oxide surface-modified titanium(IV) dioxide as a visible-light-active photocatalyst10.1039/c1cc13096j ↗
47. Solution-processed all-oxide nanostructures for heterojunction solar cells10.1039/c1jm13303a ↗
48. A study of the optical properties of metal-doped polyoxotitanium cages and the relationship to metal-doped titania10.1039/c4dt00555d ↗