Strength Reduction Factors for Fiber-Reinforced Polymer-Prestressed Concrete Bridges in Flexure

1. ACI Committee 440, “Prestressing Concrete Structures with FRP Tendons (ACI 440.4R-04),” American Concrete Institute, Farmington Hills, MI, 2004, 35 pp.

2. AASHTO, “AASHTO LRFD Bridge Design Specifications, 7th Edition with 2015 Interim Revisions,” American Association of State Highway and Transportation Officials, Washington, DC, 2015, 2160 pp.

3. Lees, J. M., and Burgoyne, C. J., “Experimental Study of Influence of Bond on Flexural Behavior of Concrete Beams Pretensioned with Aramid Fiber Reinforced Plastics,” ACI Structural Journal, V. 96, No. 3, May-June 1999, pp. 377-385.10.14359/671 ↗

4. Grace, N. F., and Abdel-Sayed, G., “Behavior of Carbon Fiber-Reinforced Prestressed Concrete Skew Bridges,” ACI Structural Journal, V. 97, No. 1, Jan.-Feb. 2000, pp. 26-35.10.14359/830 ↗

5. Dolan, C. W., and Swanson, D., “Development of Flexural Capacity of a FRP Prestressed Beam with Vertically Distributed Tendons,” Composites. Part B, Engineering, V. 33, No. 1, 2002, pp. 1-6. doi: 10.1016/S1359-8368(01)00053-110.1016/S1359-8368(01)00053-1 ↗

6. Zou, P. X. W., “Flexural Behavior and Deformability of Fiber Reinforced Polymer Prestressed Concrete Beams,” Journal of Composites for Construction, ASCE, V. 7, No. 4, 2003, pp. 275-284. doi: 10.1061/(ASCE)1090-0268(2003)7:4(275)10.1061/(ASCE)1090-0268(2003)7:4(275) ↗

7. Saiedi, R.; Fam, A.; and Green, M. F., “Behavior of CFRP-Prestressed Concrete Beams under High-Cycle Fatigue at Low Temperature,” Journal of Composites for Construction, ASCE, V. 15, No. 4, 2011, pp. 482-489. doi: 10.1061/(ASCE)CC.1943-5614.000019010.1061/(ASCE)CC.1943-5614.0000190 ↗

8. Burke, C. R., and Dolan, C. W., “Flexural Design of Prestressed Concrete Beams Using FRP Tendons,” PCI Journal, V. 46, No. 2, 2001, pp. 76-87. doi: 10.15554/pcij.03012001.76.8710.15554/pcij.03012001.76.87 ↗

9. Dolan, C. W., and Burke, C. R., “Flexural Strength and Design of FRP Prestressed Beams,” 2nd International Conference on Advanced Composite Materials in Bridges and Structures, 1996, pp. 383-390.

10. Okeil, A.; El-Tawil, S.; and Shahawy, M., “Flexural Reliability of Reinforced Concrete Bridge Girders Strengthened with Carbon Fiber-Reinforced Polymer Laminates,” Journal of Bridge Engineering, ASCE, V. 7, No. 5, 2002, pp. 290-299. doi: 10.1061/(ASCE)1084-0702(2002)7:5(290)10.1061/(ASCE)1084-0702(2002)7:5(290) ↗

11. Atadero, R. A., and Karbhari, V. M., “Calibration of Resistance Factors for Reliability Based Design of Externally-Bonded FRP Composites,” Composites. Part B, Engineering, V. 39, No. 4, 2008, pp. 665-679. doi: 10.1016/j.compositesb.2007.06.00410.1016/j.compositesb.2007.06.004 ↗

12. Kwon, O.-S.; Kim, E.; Orton, S.; Salim, H.; and Hazlett, T., “Calibration of the Live Load Factor in LRFD Design Guidelines,” Final Report OR11.003, Missouri Department of Transportation, Jefferson City, MO, 2011, 104 pp.

13. JCSS, “JCSS Probabilistic Model Code: Part 3, Resistance Models,” Joint Committee on Structural Safety, Technical University of Denmark, Kongens Lyngby, Denmark, 2002, 41 pp.

14. Vu, K., and Stewart, M., “Structural Reliability of Concrete Bridges Including Improved Chloride-Induced Corrosion Models,” Structural Safety, V. 22, No. 4, 2000, pp. 313-333. doi: 10.1016/S0167-4730(00)00018-710.1016/S0167-4730(00)00018-7 ↗

15. Nowak, A. S., “Calibration of LRFD Bridge Design Code (NCHRP 368),” Transportation Research Board, Washington, DC, 1999, 222 pp.

16. Arockiasamy, M., and Sandepudi, K., “Active Deformation Control of Bridges Prestressed with Aramid Fiber Reinforced Plastic Cables,” Florida Department of Transportation, Tallahassee, FL, 1995, 276 pp.

17. Yan, X.; Miller, B.; Nanni, A.; and Bakis, C. E., “Characterization of CFRP Rods Used as Near-Surface Mounted Reinforcement,” The 8th International Structural Faults and Repair Conference, 1999, 12 pp. (CD-ROM)

18. Micelli, F., and Nanni, A., “Mechanical Properties and Durability of FRP Rods,” Report No. 00-22, Center for Infrastructure Engineering Studies, University of Missouri Rolla, Rolla, MO, 2001, 127 pp.

19. Gar, S. P.; Hurlebaus, S.; Mander, J.; Cummings, W.; Prouty, M.; and Head, M., “Sustainability of Transportation Structures Using Composite Materials to Support Trade and Growth,” Report SWUT/14/600451-00009-1, Texas A&M Transportation Institute, College Station, TX, 2014, 110 pp.

20. ASTM E122-09, “Standard Practice for Calculating Sample Size to Estimate with Specified Precision, the Average for a Characteristic of a Lot or Process,” ASTM International, West Conshohocken, PA, 2009, 5 pp.

21. Barker, R. M., and Puckett, J. A., Design of Highway Bridges: An LRFD Approach, John Wiley & Sons Inc., Hobboken, NJ, 2007, 1009 pp.10.1002/9780470121443 ↗

22. Behnam, B., and Eamon, C., “Resistance Factors for Ductile FRP-Reinforced Concrete Flexural Members,” Journal of Composites for Construction, ASCE, V. 17, No. 4, 2013, pp. 566-573. doi: 10.1061/(ASCE)CC.1943-5614.000036310.1061/(ASCE)CC.1943-5614.0000363 ↗

23. ACI Committee 440, “Guide for the Design and Construction of Structural Concrete Reinforced with FRP Bars (ACI 440.1R-06),” American Concrete Institute, Farmington Hills, MI, 2006, 44 pp.

24. Zadeh, H. J., and Nanni, A., “Reliability Analysis of Concrete Beams Internally Reinforced with Fiber-Reinforced Polymer Bars,” ACI Structural Journal, V. 110, No. 6, Nov.-Dec. 2013, pp. 1023-1032.10.14359/51686157 ↗

25. ACI Committee 318, “Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary (ACI 318R-14),” American Concrete Institute, Farmington Hills, MI, 2014, 519 pp.

26. Precast/Prestressed Concrete Institute, PCI Design Handbook, seventh edition, Chicago, IL, 2010.