Phase decomposition in biomedical Co–29Cr–6Mo–0.2N alloy during isothermal heat treatment at 1073K
Source abstract
Abstract
The precipitation behavior and phase transformation, from a face-centered cubic γ phase to a hexagonal close-packed ε phase, in the biomedical Co–29Cr–6Mo–0.2 N (wt.%) alloy during isothermal heat treatment at 1073 K were investigated to obtain a sound understanding of the microstructural evolution occurring in this alloy system. The alloy initially had a single-phase γ matrix. The isothermal γ → ε martensitic transformation was identified in the specimens at the early stage of the heat treatment. As the heat treatment progressed, the microstructures were almost completely replaced with the lamellae consisting of the ε and Cr2N phases. The ε + Cr2N lamellar structures formed from the γ grain boundaries via a eutectoid reaction. The formation of a very fine σ phase was also identified. The present study indicates that adding nitrogen to the alloys significantly influences the phase transformation that directly affects their mechanical properties, wear resistance, and corrosion behavior.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Recent metallic materials for biomedical applications10.1007/s11661-002-0109-2 ↗
2. Review of wear mechanisms in hip implants: paper I – General10.1016/j.matdes.2003.11.010 ↗
3. Pin-on-disk wear behavior in a like-on-like configuration in a biological environment of high carbon cast and low carbon forged Co–29Cr–6Mo alloys10.1016/j.actamat.2006.10.005 ↗
4. Influence of metal carbides on dissolution behavior of biomedical CoCrMo alloy: SEM, TEM and AFM studies10.1016/j.electacta.2011.08.028 ↗
5. New insights into hard phases of CoCrMo metal-on-metal hip replacements10.1016/j.jmbbm.2012.03.013 ↗
6. Deformation mode in biomedical Co–27% Cr–5% Mo alloy consisting of a single hexagonal close-packed structure10.1016/j.scriptamat.2010.08.006 ↗
7. Ultrafine grain refinement of biomedical Co–29Cr–6Mo alloy during conventional hot-compression deformation10.1007/s11661-009-9879-0 ↗
8. Origin of significant grain refinement of biomedical Co–29Cr–6Mo alloy without severe plastic deformation10.1007/s11661-012-1303-5 ↗
9. Mechanical properties of as-forged Ni-free Co–29Cr–6Mo alloys with ultrafine-grained microstructure10.1016/j.msea.2011.04.027 ↗
10. Enhanced mechanical properties of as-forged Co–Cr–Mo–N alloys with ultrafine-grained structures10.1007/s11661-012-1288-0 ↗
11. Evolution of cold-rolled microstructures of biomedical Co–Cr–Mo alloys with and without N doping10.1016/j.msea.2010.09.002 ↗
12. Microstructures and mechanical properties of biomedical Co–Cr–Mo alloys processed by hot rolling10.1007/s11661-012-1156-y ↗
13. Significant improvement in mechanical properties of biomedical Co–Cr–Mo alloys with a combination of N addition and Cr enrichment10.2320/matertrans.MRA2007220 ↗
14. Effect of nitrogen on the microstructure and mechanical properties of a Co–Cr–Mo alloy10.1016/S0261-3069(96)00036-2 ↗
15. Wear properties of Co–Cr–Mo–N plasma-melted surgical implant alloys10.1016/S0924-0136(03)00077-3 ↗
16. The effects of nitrogen additions to a cobalt-chromium surgical implant alloy Part 1. Processing and microstructure10.1007/BF01160770 ↗
17. Deformation behavior of low-carbon Co–Cr–Mo alloys for low-friction implant applications10.1002/(SICI)1097-4636(199607)31:3<409::AID-JBM16>3.0.CO;2-D ↗
18. Deformation induced FCC to HCP transformation in a Co–27Cr–5Mo–0.05C alloy10.1016/j.msea.2010.12.024 ↗
19. Nanoarchitectured Co–Cr–Mo orthopedic implant alloys: nitrogen-enhanced nanostructural evolution and its effect on phase stability10.1016/j.actbio.2012.12.013 ↗
20. Effects of nitrogen addition on microstructure and mechanical behavior of biomedical Co–Cr–Mo alloys10.1016/j.jmbbm.2013.10.006 ↗
21. Grain refinement of biomedical Co–27Cr–5Mo–0.16N alloy by reverse transformation10.1016/j.matlet.2009.10.001 ↗
22. Isothermal phase transformation in biomedical Co–29Cr–6Mo alloy without addition of carbon or nitrogen10.1007/s11661-010-0273-8 ↗
23. Precipitates in Biomedical Co–Cr–Mo–C–N–Si–Mn Alloys10.1007/s11661-011-1009-0 ↗
24. Formation of hcp martensite during the isothermal aging of an fcc Co–27Cr–5Mo–0.05C orthopedic implant alloy10.1007/s11661-999-0267-6 ↗
25. Phase transformations in a wrought Co–Cr–Mo–C alloy10.1007/BF02645497 ↗
26. Martensitic transformation in a cast Co–Cr–Mo–C alloy10.1007/s11661-007-9370-8 ↗
27. Effect of isothermal aging on the microstructural evolution of Co–Cr–Mo–C alloy10.1016/j.msea.2010.06.081 ↗
28. Nucleation of recrystallization in a Co–Cr–Mo alloy10.1007/BF02648562 ↗
29. Electron channeling contrast imaging of twins and dislocations in twinning-induced plasticity steels under controlled diffraction conditions in a scanning electron microscope10.1016/j.scriptamat.2009.06.018 ↗
30. On the crystal structure of Cr2N precipitates in high-nitrogen austenitic stainless steel10.1107/S0108768104033919 ↗
31. Distinguishing features of massive transformations10.1007/BF02644965 ↗