journal article·2007-04

Influence of reinforcement weight fraction on microstructure and properties of submicron WC–Cop/Cu bulk MMCs prepared by direct laser sintering

Dongdong Gu, Yifu Shen

Journal of Alloys and Compounds· Volume 431· Issue 1-2
Publisher page

Abstract

Abstract Direct metal laser sintering (DMLS), due to its flexibility in materials and shapes, exhibits a great potential for fabricating complex shaped bulk metal matrix composites (MMCs). In the present work, the submicron WC–10% Co particulate reinforced Cu matrix composites were prepared using DMLS. The influence of reinforcement content on the sintered densification and the attendant microstructures, e.g. the dispersion homogeneity of the reinforcing particulates and the interfacial bonding ability, was investigated using scanning electron microscopy (SEM), energy disperse X-ray (EDX) spectroscopy, and atomic force microscope (AFM). It shows that using a low reinforcement content of 20 wt.% results in a poor densification with severe balling phenomena, due to a higher average composite coefficient of thermal expansion (CTE) and a superheating of the melt. A heterogeneous microstructure with a significant particulate aggregation is obtained at a high reinforcement content of 40 wt.%, because of a limited liquid formation and the resultant high liquid viscosity and reduced Marangoni effect. Using an optimal reinforcement content of 30 wt.% leads to a uniform distribution of the reinforcing particulates and a compatible interfacial microstructure, so as to obtain a favorable sintered density of 90.3% theoretical density.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Jiang · J. Alloys Compd. · 2005 · 386 · 17710.1016/j.jallcom.2004.06.015 ↗
2. Cavaliere · J. Alloys Compd. · 2004 · 378 · 11710.1016/j.jallcom.2003.10.103 ↗
3. Wong · Mater. Sci. Technol. · 2005 · 21 · 106310.1179/174328405X51758 ↗
4. Breval · Mater. Sci. Eng. A · 2005 · 391 · 28510.1016/j.msea.2004.08.085 ↗
5. Zhu · Mater. Sci. Eng. A · 2004 · 371 · 17010.1016/j.msea.2003.11.048 ↗
6. Slipenyuk · Acta Mater. · 2006 · 54 · 15710.1016/j.actamat.2005.08.036 ↗
7. Yong · J. Mater. Process. Technol. · 2005 · 168 · 26210.1016/j.jmatprotec.2005.01.012 ↗
8. Maeda · J. Mater. Process. Technol. · 2004 · 149 · 60910.1016/j.jmatprotec.2004.02.024 ↗
9. Simchi · Mater. Sci. Eng. A · 2004 · 383 · 19110.1016/j.msea.2004.05.070 ↗
10. D.D. Gu, Y.F. Shen, Powder Metall. 49, doi:10.1179/174329006X95662, in press.10.1179/174329006X95662 ↗
11. Bourell · Adv. Eng. Mater. · 2002 · 4 · 66310.1002/1527-2648(20020916)4:9<663::AID-ADEM663>3.0.CO;2-1 ↗
12. Gu · Key Eng. Mater. · 2006 · 315–316 · 34410.4028/www.scientific.net/KEM.315-316.344 ↗
13. Simchi · J. Mater. Process. Technol. · 2003 · 141 · 31910.1016/S0924-0136(03)00283-8 ↗
14. Tang · J. Mater. Process. Technol. · 2003 · 140 · 36810.1016/S0924-0136(03)00766-0 ↗
15. Das · JOM · 1998 · 50 · 1710.1007/s11837-998-0299-1 ↗
16. Das · Mater. Des. · 1999 · 20 · 11510.1016/S0261-3069(99)00017-5 ↗
17. Uzunsoy · Mater. Lett. · 2005 · 59 · 281210.1016/j.matlet.2005.03.064 ↗
18. Dewidar · Proc. Inst. Mech. Eng., Part B: J. Eng. Manuf. · 2003 · 217 · 165110.1243/095440503772680587 ↗
19. Chatterjee · J. Mater. Process. Technol. · 2003 · 136 · 15110.1016/S0924-0136(03)00132-8 ↗
20. Xie · J. Mater. Process. Technol. · 2005 · 170 · 51610.1016/j.jmatprotec.2005.05.055 ↗
21. Xu · Rare Met. Mater. Eng. · 2005 · 34 · 341
22. Tolochko · Rapid Prototyping J. · 2003 · 9 · 6810.1108/13552540310467077 ↗
23. Murali · J. Mater. Process. Technol. · 2003 · 136 · 17910.1016/S0924-0136(03)00150-X ↗
24. Kruth · Rapid Prototyping J. · 2005 · 11 · 28710.1108/13552540510623594 ↗
25. Wang · J. Mater. Process. Technol. · 2006 · 172 · 7710.1016/j.jmatprotec.2005.09.004 ↗
26. Y. Wang, J. Bergström, C. Burman, Int. J. Fatigue, doi:10.1016/j.ijfatigue.2006.01.007, in press.10.1016/j.ijfatigue.2006.01.007 ↗
27. D.D. Gu, Y.F. Shen, Mater. Lett., doi:10.1016/j.matlet.2006.03.103, in press.10.1016/j.matlet.2006.03.103 ↗
28. Wu · Mater. Sci. Technol. · 2005 · 21 · 29510.1179/174328405X18665 ↗
29. Zheng · Mater. Chem. Phys. · 2005 · 92 · 6410.1016/j.matchemphys.2004.12.031 ↗
30. M.C. Yang, Ph.D. Thesis, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, 2004, p. 25.
31. Wang · Rare Met. Mater. Eng. · 1997 · 26 · 41
32. Fischer · Acta Mater. · 2003 · 51 · 165110.1016/S1359-6454(02)00567-0 ↗
33. Niu · Scripta Mater. · 1999 · 41 · 122910.1016/S1359-6462(99)00276-6 ↗
34. Niu · J. Mater. Sci. · 2000 · 35 · 3110.1023/A:1004720011671 ↗
35. Wu · J. Mater. Sci. Technol. · 1999 · 15 · 233
36. Zhu · Mater. Des. · 2006 · 27 · 16610.1016/j.matdes.2004.09.012 ↗
37. Gåård · J. Alloys Compd. · 2006 · 421 · 16610.1016/j.jallcom.2005.09.084 ↗
38. Shen · Key Eng. Mater. · 2006 · 315–316 · 357
39. Das · Adv. Eng. Mater. · 2003 · 5 · 70110.1002/adem.200310099 ↗
40. Agarwala · Rapid Prototyping J. · 1995 · 1 · 2610.1108/13552549510078113 ↗