journal article·2014-07

Effects of hydrogen loading and type of titanium hydride on grain refinement and mechanical properties of Ti–6Al–4V

Chia-Chieh Shen, Chung-Min Wang

Publisher page

Abstract

Abstract Effects of hydrogen loadings of 0.1–0.9 H/M and the types of titanium hydride of β H and δ at 600 °C on both grain refinement and mechanical properties of Ti–6Al–4V (Ti64) were studied simultaneously. It was observed that the volumetric density of uniform refined nanostructural platelets caused by β H treatment increased as hydrogen loading increased up to 0.6 H/M. The platelets had a thickness of approximately 50–100 nm, located within the original α grains. As a result, microhardness and compressive yield strength for dehydrogenated Ti64 were enhanced progressively from 308 Hv and 810 MPa for the specimen without hydrogen alloying to 394 Hv and 1125 MPa, respectively, for one subjected to hydrogen loading with 0.6 H/M, which are increases of 28% and 39%, respectively. However, the mechanical properties of Ti64 with δ treatment over hydrogen loading of 0.7 H/M were degraded due to formation of cracks in the microstructure. Based on the phase diagram of Ti64–H system, it is concluded that β H treatment with hydrogen loadings below 0.66 H/M at 600 °C is a satisfactory way to enhance the mechanical properties of Ti64.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Metal and Thin Film Mechanics · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Boyer · 1994
2. Fusheng Co. Ltd, .
3. China Steel Precision Materials Co. .
4. Froes · Int. Mater. Rev. · 2004 · 49 · 22710.1179/095066004225010550 ↗
5. Hydrogen-assisted processing of materials10.1016/S0921-5093(00)00906-0 ↗
6. Fang · Mater. Chem. Phys. · 1998 · 56 · 3510.1016/S0254-0584(98)00137-0 ↗
7. Liu · Mater. Chem. Phys. · 2008 · 110 · 44010.1016/j.matchemphys.2008.02.034 ↗
8. Okada · J. Alloys Comp. · 2013 · 580 · s40110.1016/j.jallcom.2013.03.225 ↗
9. Liu · Int. J. Hydrogen Energy · 2009 · 34 · 110810.1016/j.ijhydene.2008.10.071 ↗
10. Azevedo · J. Alloys Comp. · 2003 · 353 · 21710.1016/S0925-8388(02)01297-5 ↗
11. Yang · Scripta Metall. Mater. · 1992 · 27 · 169510.1016/0956-716X(92)90004-X ↗
12. Shen · Acta Mater. · 2009 · 57 · 86810.1016/j.actamat.2008.10.026 ↗
13. Shen · Acta Mater. · 2007 · 55 · 105310.1016/j.actamat.2006.09.019 ↗
14. Askeland · 2011
15. Blackburn · J. Alloys Comp. · 2008 · 454 · 48310.1016/j.jallcom.2007.01.006 ↗
16. Yu · Scripta Metall. · 2006 · 55 · 102310.1016/j.scriptamat.2006.08.010 ↗
17. Zhang · Int. J. Hydrogen Energy · 1997 · 22 · 16110.1016/S0360-3199(96)00167-X ↗
18. Kumar · Acta Mater. · 2003 · 51 · 574310.1016/j.actamat.2003.08.032 ↗
19. Welsch · Metall. Trans. · 1977 · 8A · 16910.1007/BF02677278 ↗
20. Barkov · Phys. Rev. Spec. Top.-AC. · 2012 · 15 · 122001-1
21. Alefeld · 1978
22. Ishiyama · J. Nucl. Mater. · 2000 · 37 · 144