Direct electrolytic preparation of cerium/nickel hydrogen storage alloy powder in molten salt
Source abstract
Abstract
Abstract The preparation of CeNi5 by direct electrochemical reduction of mixed powders of cerium oxide (CeO2) and nickel oxide (NiO) (atomic Ce/Ni ratio, 1:5) in a molten mixture of CaCl2 and NaCl (mass CaCl2/NaCl ratio, 7:3) at 820 °C has been studied. The influence of process parameters, such as sintering temperature, cell voltage, and temperature of the molten salt, on the electrolysis process are reported. The current–time plots are shown at constant voltage electrolysis under different conditions. The composition and morphology of the products were analyzed by X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. The results show that pure CeNi5 can be prepared by direct electrochemical reduction of mixed CeO2/NiO pellets sintered at 850–1250 °C in CaCl2/NaCl melt at a voltage of 2.5 V or higher for 11 h. The product from the electrolysis was in the form of porous pellets and could be readily ground into CeNi5 alloy powder. At a voltage of 2.5 V or higher, the reduction of the mixed oxide starts from NiO to Ni, followed by that of CeO2 on the surface of the newly formed Ni to form CeNi5 alloy. The reduction rate increases with increasing cell voltage and temperature of molten salt.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Molten salt chemistry and electrochemical processes · Thermodynamic and Structural Properties of Metals and Alloys · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Geng · Int. J. Hydrogen Energy · 2003 · 28 · 63310.1016/S0360-3199(02)00137-4 ↗
2. Soria · J. Power Sources · 2001 · 102 · 9710.1016/S0378-7753(01)00796-0 ↗
3. Wang · Int. J. Hydrogen Energy · 2006 · 31 · 60310.1016/j.ijhydene.2005.06.001 ↗
4. Dischinger · J. Alloys Compd. · 2000 · 312 · 20110.1016/S0925-8388(00)01151-8 ↗
5. Rong · J. Alloys Compd. · 2000 · 311 · 4010.1016/S0925-8388(00)00857-4 ↗
6. Klyamkin · J. Alloys Compd. · 2005 · 398 · 14510.1016/j.jallcom.2005.02.038 ↗
7. Wang · J. Alloys Compd. · 2006 · 420 · 10710.1016/j.jallcom.2005.10.053 ↗
8. Huang · J. Alloys Compd. · 2002 · 330 · 83110.1016/S0925-8388(01)01472-4 ↗
9. Chen · Nature · 2000 · 407 · 36110.1038/35030069 ↗
10. Jin · Angew. Chem. Int. Ed. · 2004 · 43 · 73310.1002/anie.200352786 ↗
11. Gordo · Electrochim. Acta · 2004 · 49 · 219510.1016/j.electacta.2003.12.045 ↗
12. Jiang · Angew. Chem. Int. Ed. · 2006 · 45 · 42810.1002/anie.200502318 ↗
13. Wang · Angew. Chem. Int. Ed. · 2006 · 45 · 238410.1002/anie.200503571 ↗
14. Chen · Trans. Inst. Min. Metall. Sect. C—Miner. Process Extr. Metall. · 2006 · 115 · 4910.1179/174328506X91365 ↗
15. Qiu · Electrochim. Acta · 2006 · 51 · 578510.1016/j.electacta.2006.03.019 ↗
16. Yan · J. Electrochem. Soc. · 2005 · 152 · D1210.1149/1.1830351 ↗
17. Qiu · J. Electroanal. Chem. · 2006 · 589 · 13910.1016/j.jelechem.2006.02.002 ↗
18. Glowacki · Physica C · 2003 · 387 · 24210.1016/S0921-4534(03)00679-8 ↗
19. Qiu · J. Electrochem. Soc. · 2005 · 152 · E32810.1149/1.2012567 ↗
20. Muir Wood · Adv. Eng. Mater. · 2003 · 5 · 65010.1002/adem.200300369 ↗
21. Chen · J. Electrochem. Soc. · 2002 · 149 · E45510.1149/1.1513985 ↗
22. Deng · J. Phys. Chem. B · 2005 · 109 · 1404310.1021/jp044604r ↗
23. Chen · Metall. Mater. Trans. B · 2004 · 35 · 22310.1007/s11663-004-0024-6 ↗