journal article·2007-04

Nanocrystallization and hydriding properties of amorphous melt-spun Mg65Cu25Nd10 alloy

L.J. Huang, G.Y. Liang, Z.B. Sun, Y.F. Zhou

Journal of Alloys and Compounds· Volume 432· Issue 1-2
Publisher page

Abstract

Abstract Amorphous Mg-based alloy Mg 65 Cu 25 Nd 10 was prepared by melt spinning. Thermal stability and phase transition in the as-quenched alloy were studied by TEM, DSC, X-ray and electron diffraction. It was found that the crystallization process of melt-spun Mg 65 Cu 25 Nd 10 ribbons consists of three steps. The first crystallization reaction at about 180 °C is connected with the formation of Mg 2 Cu nanocrystalline phase with average grain size in the range 5–10 nm, followed by formation of a coarser grained α-Mg crystalline phase (210–225 °C) corresponding to a second crystallization reaction. At higher temperatures a third exothermic effect (at about 320 °C) can be detected and the stable Mg 2 Cu, α-Mg and Cu 5 Nd phases are present with the biggest grain size about 100 nm. The hydrogenation characteristics of the as-quenched and the annealed samples (partially and fully crystallized) were compared as well. The amorphous Mg 65 Cu 25 Nd 10 alloy shows the best initial hydrogenation rate and the maximum hydrogen capacity (3.2 wt.%) in comparison with those of partially crystalline and completely crystallized microstructural states.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen Storage and Materials · Magnetic Properties of Alloys · Nanomaterials for catalytic reactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Reilly · Inorg. Chem. · 1968 · 7 · 225410.1021/ic50069a016 ↗
2. Reilly · Inorg. Chem. · 1967 · 6 · 222010.1021/ic50058a020 ↗
3. Lee · J. Alloys Compd. · 2000 · 313 · 25810.1016/S0925-8388(00)01205-6 ↗
4. Hong · J. Alloys Compd. · 2002 · 330–332 · 58410.1016/S0925-8388(01)01507-9 ↗
5. Mohamad · J. Power Sources · 2003 · 115 · 16110.1016/S0378-7753(02)00619-5 ↗
6. Abdellaoui · J. Alloys Compd. · 2003 · 356/357 · 55710.1016/S0925-8388(03)00119-1 ↗
7. Spassov · J. Alloys Compd. · 1998 · 279 · 27910.1016/S0925-8388(98)00680-X ↗
8. Wang · J. Alloys Compd. · 2002 · 336 · 29710.1016/S0925-8388(01)01891-6 ↗
9. Yamaura · J. Alloys Compd. · 2002 · 347 · 23910.1016/S0925-8388(02)00759-4 ↗
10. Inoue · Mater. Trans. JIM · 1992 · 33 · 93710.2320/matertrans1989.33.937 ↗
11. Wu · Int. J. Rapid Solid. · 1993 · 8 · 65
12. Inoue · Mater. Sci. Eng. A · 1993 · 173 · 110.1016/0921-5093(93)90175-E ↗
13. Kam · J. Mater. Res. · 1999 · 14 · 163810.1557/JMR.1999.0220 ↗
14. Gebert · Mater. Sci. Eng. A · 2001 · 299 · 12510.1016/S0921-5093(00)01401-5 ↗
15. Savyak · J. Alloys Compd. · 2004 · 364 · 22910.1016/S0925-8388(03)00529-2 ↗
16. Huang · J. Alloys Compd. · 2006 · 421 · 27910.1016/j.jallcom.2005.11.039 ↗
17. Huang · J. Power Sources. · 2006 · 160 · 68410.1016/j.jpowsour.2005.12.072 ↗
18. Spassov · J. Alloys Compd. · 2002 · 334 · 21910.1016/S0925-8388(01)01745-5 ↗
19. Orimo · Appl. Phys. A · 2001 · 72 · 16710.1007/s003390100771 ↗
20. Inoue · Acta Mater. · 2000 · 48 · 278